2014 TOYOTA AVENSIS isofix

28
AVENSIS_OM_OM20B88E_(EE)
Pictorial indexLuggage compartment
(wagon)
With deck rail
Luggage mat P. 501
Deck side board  P. 502
Separation net  P. 503
Luggage cover  P. 502
Cargo hook P. 500
ISOFIX rigid anchor P. 170

29
AVENSIS_OM_OM20B88E_(EE)
: If equipped
Without deck rail
Luggage mat P. 501
Deck side board  P. 502
Separation net  P. 503
Luggage cover  P. 502
Cargo hook P. 500
ISOFIX rigid anchor P. 170

164 1-7. Safety information
AVENSIS_OM_OM20B88E_(EE)
Child restraint system suitability for various seating positions
(with ISOFIX rigid anchor)
Provided information in the table shows your child restraint system
suitability for various seating positions.
Mass groups Size class FixtureVehicle ISOFIX
positions
Rear outside
CarrycotF
ISO/L1X
G
ISO/L2X
(1) X
Group 0
Up to 10 kg (22 lb.)
(0 - 9 months)E
ISO/R1IL1, IL2
(1) X
Group 0
+
Up to 13 kg (28 lb.)
(0 - 2 years)E
ISO/R1IL1, IL2
D
ISO/R2IL1, IL2
C
ISO/R3IL1, IL2
(1) X
Group I
9 to 18 kg
(20 to 39 lb.)
(9 months - 4 years)D
ISO/R2X
C
ISO/R3X
B
ISO/F2IUF, IL2
B1
ISO/F2XIUF, IL2
A
ISO/F3IUF, IL2
(1) X
Group II
15 to 25 kg
(34 to 55 lb.)(1) X
Group III
22 to 36 kg
(49 to 79 lb.)(1) X

165 1-7. Safety information
1
Before driving
AVENSIS_OM_OM20B88E_(EE)(1) For the CRS which do not carry the ISO/XX size class identifica-
tion (A to G), for the applicable mass group, the car manufac-
turer shall indicate the vehicle specific ISOFIX child restraint
system(s) recommended for each position.
Key of letters inserted in the above table:
IUF: Suitable for ISOFIX forward-facing child restraint systems of
universal category approved for use in this mass group.
IL1: Suitable for “TOYOTA MINI with TOYOTA ISOFIX BASE” (0 to
13 kg [0 to 26 lb.]) approved for the use in this mass group.
IL2: Suitable for “TOYOTA MIDI with TOYOTA ISOFIX BASE” (0 to
18 kg [0 to 39 lb.]) approved for the use in this mass group.
X: ISOFIX position not suitable for ISOFIX child restraint systems
in this mass group and/or this size class.
The child restraint systems mentioned in the table may not be avail-
able outside of the EU area.
Other child restraint systems different from the systems mentioned in
the table can be used, but the suitability of the systems must be care-
fully checked with the child restraint system manufacturer and
retailer.

169
1
1-7. Safety information
Before driving
AVENSIS_OM_OM20B88E_(EE)
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure the child restraints to the seats using a seat belt or a ISOFIX
rigid anchor (ISOFIX child restraint system). Attach the top strap
when installing a child restraint system.
Seat belts (An ELR belt
requires a locking clip.)
ISOFIX rigid anchor (ISOFIX
child restraint system)
These exclusive fixing bars are
provided for the outside rear
seats. (Tags displaying the
location of the anchors are
attached to the seats.)

174 1-7. Safety information
AVENSIS_OM_OM20B88E_(EE)
Removing a child restraint system installed with a seat belt
Push the buckle release button
and fully retract the seat belt.
Installation with ISOFIX rigid anchor (ISOFIX child restraint
system)
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the seat.
If the child restraint has a top
strap, the top strap should be
latched onto the anchors.

175 1-7. Safety information
1
Before driving
AVENSIS_OM_OM20B88E_(EE)
Child restraint systems with a top strap
Secure the child restraint system using a seat belt or ISOFIX
rigid anchors, and do the following.
Remove the head restraint.
(P. 9 8 )
Open the anchor bracket cover, latch the hook onto the
anchor bracket and tighten the top strap.
Sedan
Make sure the top strap is
securely latched.
Wagon
STEP1
STEP2

179 1-7. Safety information
1
Before driving
AVENSIS_OM_OM20B88E_(EE)
CAUTION
When installing a child restraint system
When a junior seat is installed, always ensure that the shoulder belt is
positioned across the center of the child’s shoulder. The belt should be
kept away from the child’s neck, but not so that it could fall off the child’s
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
Ensure that the belt and tab are securely locked and the seat belt is not
twisted.
Shake the child restraint left and right, and forward and back to ensure that
it has been securely installed.
Follow all installation instructions provided by the child restraint system
manufacturer.
To correctly attach a child restraint system to the anchors
When using the ISOFIX rigid anchors, be sure that there are no foreign
objects around the anchors and that the seat belt is not caught behind the
child restraint system. Make sure the child restraint system is securely
attached, or it may cause death or serious injury to the child or other passen-
gers in the event of a sudden stop, sudden swerve or accident.