2014 TESLA MODEL S weight

Child Safety SeatsGuidelines for Seating ChildrenYou must restrain infants and small children using a child safety seat appropriate for the child’sage, weight, and size. Never seat a child in a child safety seat or a booster seat on the front
passenger seat when the airbag is activated. To disable the front passenger seat airbag, see
Disabling the Passenger Front Airbag on page 21. Carefully follow the instructions provided by the manufacturer of the child safety seat.Warning: Never use a rearward facing child restraint on a seat protected by an ACTIVE
AIRBAG in front of it. DEATH or SERIOUS INJURY to the child can occur. Refer to the
following label fitted to both sides of the passenger sunvisor.
If your Model S is equipped with the optional Tesla built-in rear facing child seats, these seats are
child safety seats and are designed only for children within a specific height and weight range
(see Tesla Built-In Rear Facing Child Seats on page 15).
Choosing a Child Safety Seat
Refer to the tables below for guidelines on the type of seat belt installed and ISOFIX installed
child restraint you should use based on the weight of the child.
Seat Belt Installed Child Restraints
Mass GroupFront PassengerRear OutboardRear CentreGroup 0up to 10 kgLUUGroup 0+up to 13 kgLUUGroup 19 - 18 kgUF*U, UFU, UFGroup II15 - 25 kgUF*U, UFU, UFGroup III22 - 36 kgUF*U, UFU, UFU: Universal rear facing child restraint
UF: Universal forward facing child restraint
L: Suitable for these particular child restraints - Maxi-Cosi Cabrio/Cabriofix E4 04443517 or
Takata Mini E4 04443717
*: Seat must be placed in rearmost highest position.
NOTE: Attach booster seats using seat belts only (do not use ISOFIX).
Safety Information
Safety Information9

ISOFIX Installed Child Restraints
Mass GroupSize ClassFixture
Rear
Outboard ISOFIX
PositionRear Centre
ISOFIX
Position*Group 0up to 10 kgER1ILIL
Group 0+up to 13 kg
ER1IL A, CILDR2ILAILCR3ILA, BIL
Group 19 - 18 kg
DR2ILILCR3ILILBF2IUF, IL BIUFB1F2xIUF, ILB, DIUFAF3IUF, IL DIUFIL: Suitable for any semi-universal child restraint (any rear or forward facing restraint with
support leg)
IUF: Suitable for any universal child restraint (forward facing with tether)
A Recommendation: Takata Mini E4 04443717
B Recommendation: Takata Midi E4 04444204
C Recommendation: Maxi-cosi Cabriofix/Easyfix E4 04443517
D Recommendation: Maxi-cosi Pearl/familyfix E4 043908
*The rear center ISOFIX seating position is not available on all vehicles.
Note: If the combined weight of the child and the child safety seat is over 29 kg, Tesla
recommends attaching the safety seat using the seat belt and upper tether strap. In addition to
safety, this has the added benefit of ensuring the seat belt reminder does not stay lit. Always
follow the seat belt manufacturer’s instructions when installing child safety seats.
Safety Information
10Model S Quick Guide

Seating Larger Children
If a child is too large to fit into a child safety
seat, but too small to safely fit into the standard seat belts, use a booster seat
appropriate for the child’s age and size. Carefully follow the manufacturer’s
instructions to secure the booster seat using
the seat belts. Do not use the ISOFIX system to secure booster seats, even in situationswhere the booster seat is equipped with the
ISOFIX system.
Installing Child Safety Seats
There are two general methods used to install child safety seats:
• Seat belt retained - these seats are secured using the vehicle’s seat belts (see
Installing Seat Belt Retained Child Seats
on page 11).
• ISOFIX retained - these seats can attach to anchor bars built into the vehicle’s rear
seats (see Installing ISOFIX Child Seats on
page 12).
Check the child safety seat manufacturer’s
instructions and the table on Choosing a Child Safety Seat on page 9 to determine which
installation method to use. Some child safety
seats can be installed using either method.
Always follow the child safety seat
manufacturer’s instructions.Installing Seat Belt Retained Child Seats
First, make sure that the child falls into the
correct weight range for the seat.
Avoid dressing the child in bulky clothing and do not place any objects between the child
and the restraint system.
Adjust harnesses for every child, every trip.
Always follow the detailed instructions
provided by the child safety seat
manufacturer. General guidelines are provided below.
1. Place the child safety seat in Model S,
route the seat belt, and secure the buckle
in accordance with the child safety seat
manufacturer’s instructions.
2. Allow the seat belt to retract, and remove
all slack in the seat belt while firmly
pushing the child safety seat into the Model S seat.
3. If the seat belt retained child safety seat
has an upper tether, attach it to the back of the seat (see Attaching Upper Tether
Straps on page 13).
Safety Information
Safety Information11

1Tire category. P indicates that the tire is for passenger vehicles.2Tire width. This 3-digit number is the width (in millimeters) of the tire from sidewall
edge to sidewall edge.3Aspect ratio. This 2-digit number is the sidewall height as a percentage of the tread width. So, if the tread width is 205 mm, and the aspect ratio is 50, the sidewall height is
102 mm.4Tire construction. R indicates that the tire is of Radial ply construction.5Wheel diameter. This 2-digit number is the diameter of the wheel rim in inches.6Load index. This 2 or 3-digit number is the weight each tire can support. This number is not always shown.7Speed rating. When stated, indicates the maximum speed (in mph) at which the tire
can be used for extended periods. Q=99 mph (160 km/h), R=106 mph (170 km/h), S=112
mph (180 km/h), T=118 mph (190 km/h), U=124 mph (200 km/h), H=130 mph (210
km/h), V=149 mph (240 km/h), W=168 mph (270 km/h), Y=186 mph (300 km/h).8Tire composition and materials. The number of plies in both the tread area and the sidewall area indicates how many layers of rubber coated material make up the
structure of the tire. Information is also provided on the type of materials used.9Maximum tire load. The maximum load which can be carried by the tire.10Maximum permissible inflation pressure. This pressure should not be used for normal driving.11U.S. DOT Tire Identification Number (TIN). Begins with the letters DOT and indicates
that the tire meets all federal standards. The next 2 digits/letters represent the plant
code where it was manufactured, and the last 4 digits represent the week and year of
manufacture. For example, the number 1712 is used to represent the 17th week of 2012.
The other numbers are marketing codes used at the manufacturer’s discretion. This
information can be used to contact consumers if a tire defect requires a recall.12Treadwear grade. This number indicates the tire’s wear rate. The higher the treadwear number is, the longer it should take for the tread to wear down. A tire rated at 400, for
example, lasts twice as long as a tire rated at 200.13Traction grade. Indicates a tire’s ability to stop on wet roads. A higher graded tire should allow you to stop your vehicle in a shorter distance than a tire with a lower
grade. Traction is graded from highest to lowest as AA, A, B, and C.14Temperature grade. The tire’s resistance to heat is grade A, B, or C, with A indicating
the greatest resistance. This grading is provided for a correctly inflated tire, which is
being used within its speed and loading limits.
Safety Information
Safety Information29

Vehicle Loading
Load Capacity Labeling It is important to understand how much
weight your Model S can safely carry. This weight is called the vehicle capacity weight
and includes the weight of all occupants, cargo and any additional equipment added toyour Model S since it was manufactured.
There are two labels attached to Model S that
state how much weight it can safely carry.
These labels are located on the center door
post and are visible when the driver’s door is
open:
1. Tire and Loading Information label
2. Statutory Plate
Warning:
Overloading Model S has an
adverse effect on braking and handling,
which can compromise your safety or
damage Model S.Caution: Never load more than 136 kg in
the front trunk. Doing so can cause
damage.Tire and Loading Information Label
The Tire and Loading Information labelprovides:
• The maximum number of occupant seating positions.
• The maximum vehicle capacity weight.
• The size of the original tires.
• The cold inflation pressures for the original front and rear tires. These
pressures are recommended to optimize
ride and handling characteristics.
Never change this label, even if you use different tires in the future.
Note: If Model S is loaded to its full capacity,
double check all tires to ensure they are
inflated to their recommended pressure levels.
Statutory Plate
In addition to the VIN, the Statutory Plate provides:
• GVWR - Gross Vehicle Weight Rating. The maximum allowable total mass of Model S.
This is calculated as the weight of Model
S, all passengers, fluids, and cargo.
• GAWR - Gross Axle Weight Rating for the front and rear axles. The GAWR is the
maximum distributed weight that each
axle can support.
Caution: To prevent damage, never load
Model S so that it is heavier than GVWR
or exceeds the individual GAWR weights.
Safety Information
30Model S Quick Guide

Calculating Load Limits
1. Locate the statement “The combined
weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your
vehicle’s “Tire and Loading Information” label.
2. Determine the combined weight of the
driver and passengers that will be riding in
the vehicle.
3. Subtract the combined weight of the
driver and passengers from XXX kg (see
Step 1).
4. The resulting figure equals the available
amount of cargo and luggage load
capacity. For example, if the “XXX”
amount equals 635 kg, and there will be five 68 kg passengers in the vehicle, the
amount of available cargo and luggage capacity is 295 kg (635 ‑ 340
(5 x 68) = 295 kg).
5. Determine the combined weight of cargo
and luggage being loaded on the vehicle.
That weight must not exceed the available
cargo and luggage load capacity
calculated in Step 4.Warning: The front and rear trunks are
the preferred places to carry objects. In
an accident, or during hard braking and sharp turns, loose items in the cabin
could injure occupants.
Example Load Limit Calculations
How much cargo you can carry in Model S
depends on the number and weight of
passengers. The following are typical
examples of calculated load limits. These
examples assume passengers weighing 68 kg. If the passengers weigh more or less, the
available cargo and luggage load capacity decreases or increases respectively.
Example 1: Driver and one passenger
DescriptionTotalVehicle capacity weight433 kgSubtract occupant weight (2 x 68
kg)136 kgAvailable cargo weight297 kgExample 2: Driver and four passengersDescriptionTotalVehicle capacity weight433 kgSubtract occupant weight (5 x 68
kg)340 kgAvailable cargo weight93 kg
The available cargo or luggage weight should
then be distributed between the front and
rear trunks.
Caution: Do not exceed the maximum
front trunk load weight of 136 kg.
Towing a Trailer
Warning: Do not tow a trailer. Model S
does not support a trailer hitch. Installing one could damage Model S and increase
the risk of an accident.
Disclaimers
Vehicle Telematics/Data Recorders
This vehicle is equipped with electronic
modules that monitor and record data from
various vehicle systems, including the motor,
Battery, braking and electrical systems. The
electronic modules record information about
various driving and vehicle conditions,
including braking, acceleration, trip and other related information regarding your vehicle.
These modules also record information about
the vehicle’s features such as charging events
and status, the enabling/disabling of various
systems, diagnostic trouble codes, VIN, speed,
direction and location.
The data is stored by the vehicle and may be
accessed, used and stored by Tesla service
technicians during vehicle servicing or
periodically transmitted to Tesla wirelessly
through the vehicle’s telematics system. This data may be used by Tesla for various
purposes, including, but not limited to:
providing you with Tesla telematics services; troubleshooting; evaluation of your vehicle’s
quality, functionality and performance;
analysis and research by Tesla and its partners
for the improvement and design of our
vehicles and systems; and as otherwise may be required by law. In servicing your vehicle,
Safety Information
Safety Information31

Aairbag, front passenger, disabling 21
airbags 19
C chains 26child seatsdisabling front passenger airbag 21installing and using 9
Tesla built-in rear facing 15
D
data recording 31
delivery mileage 32
door labels 30
E event data recording 31
F
front passenger detection 21
G
GAWR 30
Gross Axle Weight Rating 30
Gross Vehicle Weight Rating 30
GVWR 30
I
ISOFIX child seats, installing 12
L
labelStatutory Plate 30
Tire and Loading Information 30
load limits 30
Mmaintenancetires 23
mileage upon delivery 32
R
roadside assistance 2
S
safety informationairbags 22
child seats 14
rear facing child seats 18
seat belts 8seat beltsin a collision 7
overview of 6
pre-tensioners 7
wearing when pregnant 6
seating capacity 30
seatsTesla built-in rear facing 15
service data recording 31
Statutory Plate 30
T telematics 31
tie-down straps 5
Tire and Loading Information label 30
Tire Pressure Monitoring Systemoverview of 26
tire pressures, checking 23
tiresbalancing 24
chains 26
inspecting and maintaining 24
pressures, how to check 23
replacing 25
replacing a tire sensor 27
rotation 24
tire markings 28
winter 25
tow chain, connecting 5
Tow mode 4
towing 4
towing a trailer 31
towing instructions 4
TPMS
Index
Index45