2014 SKODA FABIA phone

relay air condition radiator cap flat tire AUX open hood

Page 34 of 47

After confirming the connection is made to the selected device. Only the newly
selected profile will be replaced the other profiles remain connected to the
original device.
Fast switching of the HFP connection
By pressing the function key  B

» Fig. 16 on page 27 a list of paired devices is
displayed.
After pressing the function key with the name of the paired device, the mes-
sage in device screen ... Replace this connection with ... ? appears along with
the following function keys.
› Replace
- replace the connection by the selected paired device (when availa-
ble)
› Cancel
- Cancel the replacement connection
After confirming the connection is made to the selected device via the HFP
profile. The connection via the audio profile remains unchanged.
Disconnection
Press in the menu the Telephone function key

→ Bluetooth → Paired devi-
ces.
A list of paired devices is displayed.
By pressing the green icon for the profile, the message in the device screen ...
Disconnect the profile - are you sure? is displayed along with the following
function keys.
› Disconnect
- Disconnect connection
› Cancel
- Cancel the disconnection
Delete the telephone from the list of paired devices
Read and observe
on page 29 first.
›
Press in the menu the Telephone function key

→ Bluetooth → Paired de-
vices.
A list of paired devices and the following function keys are displayed.
› 

All - Delete all the telephones in the list of paired devices
› 
- Delete the desired telephone
After selecting one of the function keys, the function keys are displayed.
› Delete
- delete confirmation
› Cancel
- Cancels the deletion
Disconnection
Read and observe
on page 29 first.
The connection of a telephone to the device can be disconnected in one of the
following ways.
› By removing the ignition key (or turning off the ignition and opening the driv-
er's door in the case of vehicles with the starter button).
› By switching off the Bluetooth ®
function on the device » page 14, Bluetooth ®
settings .
› By switching off the Bluetooth ®
function on the telephone.
› By the separation of the connection in the telephone.
› By removing the telephone from the list of paired devices
» page 32, Delete
the telephone from the list of paired devices .
› By turning off the Bluetooth ®
HFP profile » page 31, Bluetooth ®
- connection
profile .
› By turning off the connected phone.
› By the moving of the phone outside the Bluetooth ®
signal range.
If a telephone is connected to the device and the device is turned off, the con-
nection to the telephone is not lost. The connection is only lost after switching
off the ignition (for vehicles with the starter button after switching off the ig-
nition and opening the driver's door).
Telephone functions
 Introduction
This chapter contains information on the following subjects:
Speed dialling a phone number
32
Directly enter a telephone number
33
List of telephone contacts
34
Call lists
35
Telephone conversation
36
First and foremost, pay attention to the safety instructions » page 4 .
Speed dialling a phone number
By pressing a function key for speed dialling
C
» Fig. 16 on page 27 an imme-
diate choice of pre-assigned phone number is possible. 
32Telephone

Page 35 of 47

There are four function keys for speed dialling available.
The management of the shortcut keys can be done in the Telephone menu →
 → User profile → Manage favourites .
Assigning a phone number›
Operate a function key for the speed dial
C
» Fig. 16 on page 27 that is not
assigned.
The unit displays the telephone book.
›
If necessary, enter one of the contact numbers for the desired telephone
contact.
The selected phone number is assigned to a function key for speed dialling.
Selecting a stored speed dial
›
Operate the desired function key for the speed dial telephone number
C
» Fig. 16 on page 27 .
Changing a stored speed dial
›
The assigned function key for speed dialling
C
» Fig. 16 on page 27 for about
2 s.
The unit displays the telephone book.
›
If necessary, enter one of the contact numbers for the desired telephone
contact.
The selected phone number is assigned to a function key for speed dialling.
Removing a phone number
›
In the Telephone menu →

→ User profile → Manage favourites .
›
Press the function key for the relevant speed dial.
By confirming the function Delete the phone number is removed.
Directly enter a telephone numberFig. 17
Direct entry of a phone number
›
Press in the menu the Telephone function key

» Fig. 16 on page 27 .
A screen appears for the entry of the telephone number » Fig. 17.
Menu for entering the phone number Input line
Delete characters in the entry line
Dial the entered number
Entering a prefix: 1)
Dial the breakdown number 2)
Dial the info number 2)
The function key with the symbol  (Mailbox option) is not supported by the
device.
Entering a phone number
Entering the phone number follows, whereby the function keys with the num-
ber are operated sequentially.
› By pressing the function key
 the telephone number is dialled.
› By pressing the function key,
 the telephone number is dialled using the
prefix.
Enter the last number dialled
If there are no figures entered for the phone number, the function key  is
displayed  or the last number dialled. 
A1)
The function key for the code appears only with active preset function
» page 28, Settings .
2)
The function key is only available for some countries.
33Telephone

Page 36 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual ›By pressing the function key
 the telephone number is dialled.
› By pressing the function key,
 the telephone number is dialled using the
prefix.
Search for a contact in the list
The inpu

›By pressing the function key
 the telephone number is dialled.
› By pressing the function key,
 the telephone number is dialled using the
prefix.
Search for a contact in the list
The input screen » Fig. 17 also functions as an alphanumeric keypad that you
can use to search for contacts in the phonebook.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc.
On the right side next to the numerical keyboard a list of contacts found from
the directory appears according to the lettered specified. By pressing the cor-
responding function key for the respective contact, dialling is started or the
contact details are displayed if the telephone contact has several phone num-
bers.
Enter the code
Typing the prefix can be performed in the following ways.
› By pressing the function key
 (dialling the entered phone number with the
prefix starts).
› By entering of characters or numbers (e.g.
 or 00 and the like a prefix is in-
serted in line A
).
The prefix may, for example be used for international calls, phone calls via a
virtual mobile network operator or distinguishing between business and pri-
vate calls and similar.
If the contact number contains a prefix, pressing the function key causes  a
further prefix to be added before the number and the connection starts. The
phone number contains at this time two prefixes and a phone call is not initi-
ated.
Dialling breakdown and info numbers › By pressing the function key,
 the breakdown number is dialled. A break-
down service will then be called when your vehicle breaks down.
› By pressing the function key
, the info number is dialled. An information
service can be called when information regarding the products and services
of the ŠKODA brand are required.
The breakdown and info numbers are free of charge. Charges are only made
for a phone call in accordance with the fare conditions of your telephone serv-
ice provider.
If a call cannot be made, then visit a ŠKODA service partner.
The breakdown and info numbers are set country-specific at the factory. If you
want to change the preset numbers, then consult a ŠKODA service partner.
List of telephone contacts
Fig. 18
List of telephone contacts / contact details
›
Press in the menu the Telephone function key

» Fig. 16 on page 27 .
A list of telephone contacts is 
» Fig. 18 .
The device telephone book contains up to 2000 free memory locations for im-
ported telephone contacts. Each contact can contain up to 5 telephone num-
bers.
The list of phone contacts can also be called during an ongoing call.
Select contact
Pressing the function key with one of the displayed contacts starts the selec-
tion 1)
.
If a contact contains several telephone numbers, the system displays a menu
containing the telephone numbers for this contact after pressing the function
key.
Pressing the function key with one of the indicated telephone numbers starts
the dialling 1)
.
Contact details
By pressing the function key  In the list of phone contacts
 the contact de-
tails 
» Fig. 18 are displayed. 
1)
A phone call can be made if no other call is active.
34Telephone

Page 37 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual By pressing the function key,  in the contact details a window for editing the
contact phone number is displayed before dialling.
Pressing the function key with one of the indicated telephone numbe

By pressing the function key,  in the contact details a window for editing the
contact phone number is displayed before dialling.
Pressing the function key with one of the indicated telephone numbers starts
the dialling 1)
.
Find contact
By pressing the function key A
» Fig. 18 Find the keyboard for entering the
contact search is opened in the telephone book » page 8, Alphanumeric with
keyboard .
By pressing the function key for the selected contact, the dialling is started 1)
or
the contact details are displayed if the telephone contact has several phone
numbers.
Invite list
Upon first connection of the telephone with the device, the system begins to
download the telephone book from the telephone and from the SIM card 2)
into
the device memory 3)
. Depending on the number of contacts this may take sev-
eral minutes to complete.
The number of imported contacts can be checked in the function
key » page 28 Imp. contacts .
Depending on the context, the number for the number of contacts imported
has the following meaning.
› During the import - xxxx / yyyy - Number of currently imported contacts into
the device memory / number of contacts in the phone.
› After importing - xxxx/2000 - number of contacts imported, that include at
least one telephone number / 2000 (highest possible number of imported
contacts in the device memory).
If the imported list of telephone contacts from the telephone contains more
than 2000 contacts, loading is stopped and the message Contacts not fully
imported. appears on the screen. Only the already downloaded contacts will
be available.
If an error occurs while loading the list, the message Import failed appears.
Please try again and check whether the ... allows connections.
Refresh list
Each time the telephone has established a new connection with the device,
the relevant telephone contacts will be updated.
During the update, the list which was stored after the last completed update
will be available. Newly stored telephone numbers are only shown after the
updating has ended.
The update can be done manually » page 28, Settings by pressing the function
key Imp. contacts .
Call lists
Fig. 19
Call list
›
Press in the menu the Telephone function key

» Fig. 16 on page 27 .
The system displays a call list.
Description of the function keys Open the call list
› All
- All calls listed (max. 120 calls)
› Missed
- List of missed calls (up to 40 calls)
› Dialled
- List of dialled numbers (up to 40 calls)
› Received
- List of received calls (up to 40 calls)
Start dialling the selected telephone contact or phone number
Display the contact details » page 34 
AB1)
A phone call can be made if no other call is active.
2)
Some telephones do not support downloading of contacts from the SIM card.
3)
With some telephones a confirmation for importing contacts to the device is necessary.
35Telephone

Page 38 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual After each completed telephone call the call list is updated, and information is
downloaded from the phone. With some phones the transfer of time related
information referencing the telephone call is

Page 43 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual Index
A
Additional keyboard languages
14
Adjusting Volume
6
Adjust vehicle systems ESC system
38
AM16
Anti-theft device4
Audio Media
20
Radio16
Audio source23
Automatic device switch off4
Automatic dr

Page 44 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual List of telephone contacts34
M
Main menu Media
20
Telephone27
MAXI DOT-Display Telephone
11
MAXI DOT display Media
9
operation8
Radio9
Media20
Audio source23
AUX26
Bluetooth audio24
Browser21
File for

Page 45 of 47

SKODA FABIA 2014 3.G / NJ Swing Infotinment Car Radio Manual Set vehicle systemsAssistance systems38
Multifunction display39
Tyres38
Windscreen wipers39
Sound13
Sources supported24
Speed restriction for winter tyres38
START-STOP37
Station See main menu
16
Statu

Page: < prev 1-8 9-16 17-24

gearbox ignition headrest clock setting overheating check transmission fluid