Select radio stations and search
Read and observe on page 8 first.
Select radio stations from the list of available stations
The device will automatically search for available radio stations in the back-
ground, which can be selected immediately after turning on the power.
›
Press the
or
button.
There will be a change to the previous or next channel.
Select radio stations from station buttons
By pressing the respective button -
, the device changes to the station
saved under the given position.
Manually selecting a radio station › Press the
Manual button.
› Press the
or
button repeatedly and set the desired value of the fre-
quency range.
Station scan
› Press the
or
button.
A search commences in the selected direction and stops at the next station
with sufficient signal strength.
Search available stations (Scan)
› Press the
Scan button.
The search is started.
This function plays all the available stations in succession for a few seconds
each.
Pressing the button again ends the search and the current station will be
played. Settings and advanced functions
Introduction
This chapter contains information on the following subjects:
Settings 9
TP traffic 9
This chapter describes the settings of the
Radio
mode and contains informa-
tion about the function of the traffic program (TP). Settings
› Press the
button repeatedly.
The following menu items are displayed in sequence.
■ TP - Sets the Traffic
■ Yes - Traffic news is being received
■ No - Traffic news is not being received
■ Scan - Browse available radio stations
■ Press - Start the scan
■ Manual - Manual selection of a radio station
■ Press - Start the manual selection
■ Search - Sets station selection (operation of or
button)
■ Stations - Select from the list of available stations
■ Pre-sets - Choice from the station buttons TP traffic
The function allows the reception of traffic information.
Turn Traffic Information mode on
› Press the
TP Yes button.
Traffic info reception off
› Press the
TP No button.
FM frequency range
If the radio station currently selected broadcasts traffic reports, then this will
be shown in the device display.
If the radio station currently selected does not broadcast traffic reports, then
this will be shown in the device display.
AM frequency range
No traffic reports are broadcast in the AM frequency.
If the FM Frequency range traffic information station is available, then this is
shown in the device display.
If the FM frequency range does not show any traffic information station as be-
ing available , then the device display will show this.
9
Radio
