The unit only switches between connected audio sources with playable con-
tent.
The device can be connected to the audio sources connected to recognise
max. 1024 directories and play max. 6500 files. The device can play a max 1024
files from a directory.
The unit will play the contents of the connected audio source by alphabetically
sequenced directory and file name.
SD memory card
Read and observe and on page 11 first.
The SD memory card slot 11
is located on the front of the device
» Fig. 1 on
page 4.
Inserting an SD memory card
› Push the SD memory card into the available slot with the cut edge to the
front right until it
“locks into place”.
Playback starts automatically.
Removing an SD memory card
› Press the inserted SD memory card.
The SD memory card “jumps” into the eject position. CAUTION
■ Use only SD memory cards with a standard size. When using smaller SD cards
with the adapter the SD memory card can fall out of the adapter while driving
due to vehicle vibrations.
■ Due to differing quality requirements of different card manufacturers, it is
not always possible to guarantee playback from SD memory cards. ■ It may not be possible to play some or all files on the SD memory card, or
their playback may be limited.
USB input
Fig. 6
AUX and USB inputs
Read and observe and on page 11 first.
The MDI input is above the storage compartment in the front center console
and is identified by the symbol » Fig. 6 .
The USB input audio source can be connected directly or via a connecting ca-
ble.
Connect the USB audio source
› Plug the USB audio source into the corresponding well.
Playback starts automatically.
Separate USB audio source
› Disconnect the USB audio source.
Charge USB audio source
With the ignition on after connecting the USB audio source, the charging proc-
ess is automatically started (applies for audio sources where charging via the
USB connector is possible).
The charging efficiency can be different compared to the charging from the
usual mains power supply. Connected audio sources can be supplied / loaded
with a current of max. 1.0 A.
Some connected audio sources may not be recognised and cannot be charged.
The charging of the connected audio source is automatically stopped after
switching off the ignition. CAUTION
■ Extension cords, or reducers can impair the function of the connected audio
source.
■ A video playback is not supported.
12 Media
