Opening and Locking 23
In the multi-purpose display of the instrument panel, you have the option of selecting diverse variants of automatic door locking and automatic door unlocking.
For information on modifying the opening and locking settings:fPlease see the chapter “LOCKING SETTINGS” on page 122.
Opening and Locking from Inside
The factory settings of the vehicle are described in this section. In the multi-function display in the instrument panel, you can change the settings and store them on the respective key for vehicles with memory.
For information on modifying the opening and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.Central locking button
Locking doors
fPress the central locking button.When the ignition is switched on, the indicator light in the button lights up.Both vehicle doors will be locked (only if all doors are closed).The doors can be opened from inside by pulling on the door opener.
Automatic with Auto Lock
If this function is activated, the vehicle is locked automatically when a speed of approximately 2 mph (5 km/h) is exceeded.
For information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Unlocking doors
fPress the central locking button.The indicator light on the button goes out.Both vehicle doors will be unlocked.
Automatic with Auto Unlock
The vehicle is automatically unlocked when the ignition key is removed.
For more information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Information
If the vehicle was locked using the car key or the emergency key, it cannot be unlocked with the central locking button.
Information
In the event of an accident with airbag deployment, the doors are unlocked automatically to facilitate fast access for helpers. The emergency flasher is also activated automatically.
14_991_Turbo_21.book Seite 23 Mittwoch, 9. April 2014 2:19 14
30 Opening and Locking
Trunk Entrapment
Your vehicle is equipped with an internal trunk release mechanism.
A person trapped in the luggage compartment can release the lid from the inside using the unlocking handle.The handle is fluorescent and glows in the dark.
Information
fWhen loading the luggage compartment, make sure that items of luggage or other objects cannot become caught on the handle.This could cause the luggage compartment to open unintentionally.
Function
If the luggage compartment lid is unlocked with unlocking the handle, the latch striker pops into the catch-hook position and the lid can be opened from the inside immediately.
A warning message in the multi-purpose display lights up when unlocking handle is operated.fStop the vehicle immediately when the warning message lights up.fCheck the luggage compartment.fClose the lid.
If the warning message in the multi-purpose display lights up when the vehicle is in motion, the lid may impact in front of the windshield and can tear off. Stop the vehicle immediately when the warning message lights up.fCheck the luggage compartment.fClose the lid.
Information
The lid cannot be opened from the inside if the battery is disconnected or empty.Safety reasons require that you unscrew the latch striker of the lid lock if you plan to put the vehicle out of operation for an extended period.fPlease consult your authorized Porsche dealer. They will advise you about the necessary measures.Unsecured Luggage Compartment LidDANGERh
14_991_Turbo_21.book Seite 30 Mittwoch, 9. April 2014 2:19 14
80 Lights, Turn Signals and Windshield Wipers
If you drive without lights, this may significantly restrict your visibility and also the ability of other road users to see your vehicle.fAlways carefully monitor the automatic driving light control.
Information
In the event of a fault in the automatic driving light assistant/Porsche Dynamic Light System (PDLS), the PDLS warning light in the instrument panel flashes.
For information on indicator lights and warning lights on the instrument panel:fPlease see the chapter “INSTRUMENT PANEL USA MODELS” on page 90.fPlease see the chapter “OVERVIEW OF WARNING AND INFORMATION MESSAGES” on page 129.
Rain function
The driving light is switched on automatically after five seconds of continuous wiper operation.
If the wipers have not been used for approx. 4 minutes, the driving light is switched off.
Automatic Coming Home lights (Welcome Home function/Entry function)
Switching on Automatic Coming Home lights
fSet light switch to .
The following lights remain switched on for a certain period to allow you to get in and out of your vehicle safely and with improved visibility in darkness:– Daytime driving lights,– Courtesy lights in the folded out exterior mirrors (on vehicles with electrically foldable mirrors),– Rear side marker lights,– License plate lights.
Welcome Home function (off delay)
When the vehicle is locked, the lights remain switched on for the duration of the off delay preset on the multi-function display.
For information on adjusting the off delay of the external lights on the multi-function display:fPlease see the chapter “ADJUSTING EXTERIOR LIGHTS” on page 120.
Entry function/Exit function
When the vehicle is unlocked, the area around the vehicle is illuminated for the duration of the off delay preset on the multi-function display.
The lights are switched off when the ignition is switched on or the light switch is set to a position other than .
For information on adjusting the off delay of the external lights on the multi-function display:fPLEASE SEE THE CHAPTER “ADJUSTING EXTERIOR LIGHTS” on page 120.
Porsche Dynamic Light System (PDLS)
Dynamic cornering light
Above a speed of approx. 5 mph (8 km/h), the low beam light is swiveled in the direction of the curve to illuminate the road more clearly, depending on the speed of the vehicle and the extent to which the steering wheel is turned.
In the event of a fault in the dynamic cornering light, the PDLS warning light in the instrument panel flashes.
Highway function in darkness
The distribution characteristics of the driving light change when driving in darkness at vehicle speeds above approx. 80 mph (130 km/h).The light beam becomes longer and the field of vision increases.
Fog lights
The distribution characteristics of the driving light change when the rear fog light is switched on at vehicle speeds below approx. 43 mph (70 km/h).The light beam becomes wider and reduces glare.
Driving without lightsWARNINGh
14_991_Turbo_21.book Seite 80 Mittwoch, 9. April 2014 2:19 14
84 Lights, Turn Signals and Windshield Wipers
A- Button for interior/reading lights B - Switching automatic interior/reading lights on/off
Interior/Reading Lights
Interior/reading lights
Switching interior/reading lights on and off
fPress button A.
Dimming (brightness adjustment)
fPress button A for at least 1 second and hold until the desired level of brightness is achieved.
Switching automatic interior/ reading lights on and off
Depending on equipment, the interior/reading lights can be switched on and off using button B or in the multi-function display menu.
Using button „B“:
fPress button B.
When automatic interior/reading lights are switched off, the indicator light in the button lights up.
When the automatic interior lighting is switched on in darkness, the interior lighting is– switched on: when a door is unlocked or opened, or when the ignition key is removed from the ignition lock.– switched off: when both doors have been closed, after a delay of approx. 120 seconds. The off delay time can be preset on the multi-function display.The interior lighting goes out as soon as the ignition is switched on or the vehicle is locked.fPlease see the chapter “SETTING INTERIOR LIGHTING OFF DELAY” on page 121.
In the multi-function display menu:
On the multi-function display, you can set whether the interior/reading lights should be switched on or remain switched off when a door is unlocked or opened or when the ignition key is removed from the ignition lock:fPlease see the chapter “ACTIVATING OR DEACTIVATING INTERIOR LIGHTS WHEN THE DOOR IS OPENED (DEPENDING ON EQUIPMENT)” on page 120.
The off delay for the interior/reading lights when both doors are closed can be set on the multifunction display:fPlease see the chapter “SETTING INTERIOR LIGHTING OFF DELAY” on page 121.
Switching off of interior/reading lights to protect the battery
In darkness, the interior lighting is switched off 16 minutes after the engine stops to preserve the vehicle battery.
In daylight conditions, interior lights that were switched on manually are switched off automatically after 1 minute.
Orientation lighting
Lights in the overhead operating console and at the ignition lock help vehicle occupants to locate important controls in the vehicle in darkness and ensure better overall orientation. The lights are switched on when the vehicle is unlocked and switched off again automatically when the vehicle is locked.
Dimming (brightness adjustment)
The brightness of the orientation lighting is adjusted on the multi-function display.fPlease see the chapter “ADJUSTING BRIGHTNESS OF ORIENTATION LIGHTING” on page 121.
Ambient lighting
If the vehicle is driven at night, a discreet light provides subtle illumination for the passenger compartment. The ambient lighting is switched off automatically when the vehicle is locked.
14_991_Turbo_21.book Seite 84 Mittwoch, 9. April 2014 2:19 14
Instrument Panel and Multi-Function Display 99
Info
Oil measurement LimitsSettings
Station/Track
Answer/Reject/End
Phonebook
Previous calls
Received calls
Manual zoom Auto zoom3D map North up
Show destination/position
Destination input
Start/Stop route guidance
Since
Total
To destination
Fill info Tire typePartial/full load Comfort/standard pressure
Start StopRoundInt.
Torque
Current speed
Setting the speed
Menu scope
Audio
Vehicle menu
Upper line
PCM display
Lower line
Shift request
Brightness
Exterior lights
Interior lights
Wiper
Revers. opt.
Door lock/unlock
Comfort Entry
Auto Memory
Air flow
Vent. panel
Auto air circ.
Time
Date
DST (+01:00)
Time Chrono
Speedometer
Temperature
Tire pressure
Consumption
German/French...
ParkAssist
Warn. tones
◊ button
Messages
Service interval
Limit 1/Limit 2
Display
Light & Visibility
Locking
Air conditioning
Date & Time
Units
Language
Volume
Steering wheel op.
Fact. settings
Last destination
Stored destinations
POIs
Cont.
Reset
Vehicle
Audio
Telephone
Map
Navigation
Trip
Tire pressure
Allwheel
Chrono
G-Force
Performance
ACC
14_991_Turbo_21.book Seite 99 Mittwoch, 9. April 2014 2:19 14
144 Personal Settings
Information
If the “ Auto Memory” function is activated, the settings stored manually on the key are overwritten each time the vehicle is locked.
Storage by pressing key button in the driver’s door
fThe ignition must be switched on.1. Press the SET button. The LED in the button lights up.2. Press key button within 10 seconds. 3. The ergonomic and comfort settings (key- specific) are stored. Storage is acknowledged acoustically and the LED in the SET button goes out.
In what situation is it useful to store the settings on key button ?
You would like to store/retrieve some of the settings when stationary or during driving and not only when locking/unlocking the vehicle. Ensure that the “ Auto Memory” function is deactivated. Otherwise, the settings will be overwritten when locking the vehicle.
Retrieving the settings from the car key
Ergonomic and comfort settings can be individually retrieved from the car key.
Automatic retrieval through unlocking of the vehicle
The settings are retrieved from the car key being used when the vehicle is unlocked and the driver's door is opened.
By pressing key button in the driver’s doorfPress and hold key button until all settings are retrievedorfWith the driver’s door open and the ignition switched off, briefly press key button . The settings are automatically retrieved.
Why do the settings on key button not correspond to the ones I have stored?
If the “ Auto Memory” function is activated in the multi-function display, all the ergonomic and comfort settings are stored on the key when locking the vehicle. Settings stored on key button are overwritten in the process.
Storing settings on buttons 1 and 2
Ergonomic settings can be individually assigned to buttons 1 and 2 in the driver’s door.fThe ignition must be switched on. 1. Press the SET button. The LED in the button lights up.2. Press button 1 or 2 or within 10 seconds. 3. The ergonomic settings are stored on the relevant button. Storage is acknowledged acoustically and the LED in the SET button goes out.
Retrieving settings with buttons 1 or 2
Retrieve ergonomic settings with buttons 1 or 2 in the driver's door.
fPress and hold button 1 or 2 until all settings are retrievedorfWith the driver’s door open and the ignition switched off, briefly press button 1 or 2. The settings are automatically retrieved or
Preventing automatic storage of settings on car key when locking
This function must be deactivated on the multi- function display.
For information on switching the automatic storage function on and off:fPlease see the chapter “SWITCHING AUTO MEMORY ON AND OFF” on page 123.
14_991_Turbo_21.book Seite 144 Mittwoch, 9. April 2014 2:19 14
Driving and Driving Safety 147
Ignition lock position 0 – Ignition off (initial position)
The engine and ignition are off in ignition lock position 0. The ignition key can be removed in this position.
Ignition lock position 1 – Ignition on
fTurn ignition key to position 1.
All electrical equipment can be switched on. The warning lights on the instrument panel light up for a lamp check.fPlease see the chapter “INSTRUMENT PANEL USA MODELS” on page 90.
If a load is not switched on for 10 minutes after switching on the ignition, the ignition must be switched on again. Turn the ignition key to ignition lock position 0 (initial position) first.
The ignition key cannot be removed when the ignition is switched on or when the engine has been started.
To remove the ignition key: fStop the vehicle.fMove PDK selector lever to position P.fSwitch ignition off.fRemove the ignition key.
Ignition lock position 2 – Start engine
fTurn ignition key to ignition lock position 2.
The key is reset automatically from position 2 to position 1 when you start the engine.
Emergency operation with Porsche Entry & Drive
Interference in radio transmission between the vehicle and ignition lock or a discharged ignition lock battery can disable the Porsche Entry & Drive comfort function.
If this happens, the control unit can be removed from the ignition lock and the vehicle can be started using the ignition key.
For information on removing the control unit from the ignition lock: fPlease see the chapter “EMERGENCY OPERATION – UNLOCKING THE IGNITION KEY/CONTROL UNIT” on page 28.
Starting and Stopping the Engine
The immobilizer can be deactivated and the engine started only using an authorized ignition key.fPlease see the chapter “IMMOBILIZER” on page 217.
Exhaust gas contains colorless and odorless carbon monoxide (CO), which is toxic even in low concentrations. Carbon monoxide can cause unconsciousness and even death if inhaled.fNever start or let the engine running in an enclosed, unventilated area. It is not recommended to sit in your car for prolonged periods with the engine on and the car not moving.
Exhaust fumes and the exhaust system are very hot when the engine is running. The exhaust system remains hot for some time after the engine is turned off.fDo not park or drive your vehicle where combustible materials, such as dry grass or leaves, can come into contact with the hot exhaust system.fIf your car catches on fire for any reason, call the fire department. Do not endanger your life by attempting to put out the fire.
Exhaust Gas
Exhaust System Fire Hazard
WARNINGh
WARNINGh
14_991_Turbo_21.book Seite 147 Mittwoch, 9. April 2014 2:19 14
216 Alarm System and Theft Protection
Alarm System and Passenger
Compartment Monitoring
FCC Numbers :
This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada.
Operation of this device is subject to the following two conditions:1. This device may not cause harmful interference, and 2. this device must accept any interference received including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Information
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user's authority to operate the equipment.
The alarm system monitors the following alarm contacts:– Alarm contacts in doors, luggage compartment lid, engine compartment lid and headlights.– Interior surveillance: Movement in the interior when the vehicle is locked, e.g. attempted theft after breaking a window.– Inclination sensor country-specific equipment: inclination of the vehicle (e.g. when attempting to tow).
If one of these alarm contacts is interrupted, the alarm horn sounds for approx. 30 seconds and the emergency flasher flashes.After 5 seconds of interruption, the alarm is triggered again. This cycle is repeated up to ten times.
Switching on
fThe alarm system is activated when the vehicle is locked.
Switching off
fThe alarm system is deactivated when the vehicle is unlocked.
Information
fIf you unlock the vehicle with the emergency key in the door lock, you must switch the ignition on (ignition lock position 1) within 10 seconds of opening the door in order to prevent the alarm system from being triggered.
Information
If button on the car key is pressed and a door or the luggage compartment lid is not opened, the vehicle is locked again automatically after 30 seconds.
Switching off the alarm system if it is triggered
fUnlock vehicle or switch on ignition.
Switching off interior surveillance and inclination sensor
If people or animals are remaining in the locked vehicle or the vehicle is being transported on, e.g. a train or ship, the interior surveillance system and inclination sensor must be switched off temporarily.fInform any persons remaining in the vehicle that the alarm system will be triggered if the door is opened.
Using the car key
fQuickly press button on the car key twice within 2 seconds.The emergency flasher flashes slowly once.The doors are locked, but can be opened from inside.
USA: KR55WK50138
Canada: 7812D-5WK50138
14_991_Turbo_21.book Seite 216 Mittwoch, 9. April 2014 2:19 14