2014 PORSCHE 911 TURBO display

Instrument Panel and Multi-Function Display 103
Phone Menu
In the “Phone” main menu, you can retrieve telephone numbers stored in the phonebook or in lists of most recently dialed or received calls.
Dialing telephone number
Answering calls
Rejecting calls
Ending a call
Making multiple calls simultaneously
During an active telephone conversation, you have the option of starting another telephone conversation.You can have a separate conversation with the person you have called or alternatively start a conference call together with the other caller.
Making additional calls
During a current call:
Switching between callers
Adding a caller to a conference call
Map Menu
In the “ Map” main menu, you can view and modify the map display on the navigation system.
Modifying map display
1. Main menu “Phone” and confirm.
1. Main menu “Phone”
2.“Phonebook” or “ Previous calls” or “ Received calls” and confirm.
3. Select the desired telephone number and confirm.
1. Main menu “Phone”
2.Select “Answer” and confirm.
1. Main menu “Phone”
2.“Reject” and confirm.
1. Main menu “Phone”
2.“End call” and confirm.
1. Main menu “Phone”
2.“New call” and confirm.
1. Main menu “Phone”
2.“Swap” and confirm.
1. Main menu “Phone”
2.“Conference” and confirm.
1. Main menu “Map” in the main menu.
1. Main menu “Map” and confirm.
2. Select display option and confirm.
3. Confirm your selection.
Function is active.
Function is not active.
14_991_Turbo_21.book Seite 103 Mittwoch, 9. April 2014 2:19 14

104 Instrument Panel and Multi-Function Display
Available display options: –“ Auto zoom” The scale of the map is set automatically from the current position of the vehicle to the next navigation maneuver point.–“ 3D map” Three-dimensional map display.–“ North up” The map always faces north.
Enlarging and reducing map display
The zoom factor of the map display can be adapted individually.
Displaying current location or destination
You can view the navigation destination or current vehicle position on an enlarged section of the map.
Navigation Menu
In the “ Navigation” main menu, you can enter a navigation destination, start route guidance and view the navigation information for an active route.
Entering navigation destination
You can enter a navigation destination in the multi-function display.Only navigation destinations from the list of previous destinations or from the list of preset POIs or stored destinations can be selected.
Starting route guidance
If route guidance is inactive and you have entered a new navigation destination you can then start route guidance.
Stopping route guidance
You can stop route guidance while in progress.
1. Main menu “Map” > “ Manual zoom” and confirm.
2. Select the desired zoom setting and confirm the setting.
1. Main menu “Map”
2.“Show destination” or “ Show position” and confirm.
1. Main menu “Navigation” and confirm.
1. Main menu “Navigation” > “ Destination input”
2.“Last destination” or “ Stored destinations” or “ POIs” and confirm.
3. Select desired navigation destination and confirm.
1. Main menu “Navigation”
2.“Start route guidance” and confirm.
1. Main menu “Navigation”
2.“Stop route guidance” and confirm.
14_991_Turbo_21.book Seite 104 Mittwoch, 9. April 2014 2:19 14

Instrument Panel and Multi-Function Display 105
Trip Menu
In the “Trip” main menu, the driving data: – Ride time– Distance– Average fuel consumption– Average speed
can be retrieved and reset.
Displaying driving data
There are three driving data displays available.
Available driving data: –“ since” Driving data since the last vehicle start.The driving data is reset automatically once the vehicle has remained stationary for 2 hours (with the ignition switched off).–“ Total” Cumulative driving data.The driving data is added progressively until a reset is performed. The data is retained even if the ignition key is removed.–“ to destination” Driving data up to navigation destination.If route guidance is active, the driving data is calculated and displayed up to the navigation destination.
Resetting driving data
The selected driving data display can be reset.
Tire Pressure Menu (Tire Pressure
Monitoring System, TPMS)
This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada.
Operation of this device is subject to the following two conditions:1. This device may not cause harmful interference, and2. this device must accept any interference received including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the
inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of
a different size than the size indicated on the vehicle placard or tire inflation pressure label, you
should determine the proper tire inflation pressure
for those tires.)
For information on the tire inflation pressure label:fPlease see the chapter “TIRES AND WHEELS” on page 244.
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale (warning light) when one or more of your tires is significantly under-inflated.Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces
1. Main menu “Trip”. in the main menu.
1. Main menu “Trip”.
2.Select “1 – since” or “ 2 – consecutive” or “ 3 – to destination” and confirm.
1. Main menu “Trip”.
2.Select the relevant driving data display and confirm.
3. Select “Reset” and confirm.
14_991_Turbo_21.book Seite 105 Mittwoch, 9. April 2014 2:19 14

106 Instrument Panel and Multi-Function Display
fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
The display as well as the settings for the Tire Pressure Monitoring System take place on the multi-function display.
However, the tire pressure must still be set manually on the wheel.fPlease see the chapter “TIRE PRESSURE FOR COLD TIRES (68 °F/ 20 °C)” on page 287.
Driving the vehicle with low tire pressure increases the risk of a tire failure and resulting loss of control. Furthermore, low tire pressure increases rate of wear of the affected tires.Please note that the Tire Pressure Monitoring System is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of Tire Pressure Monitoring System low tire pressure telltale. Low tire pressure reduces the road safety of the vehicle and destroys the tire and wheel.
Tire Pressure Monitoring System gives a warning about a pressure drop caused by natural diffusion as well as about a gradual loss of pressure caused by foreign objects.Tire Pressure Monitoring cannot warn you about tire damage that occurs suddenly (e.g. flat tire due to abrupt external effects).fWhen a red tire pressure warning appears, stop immediately in a suitable place and check the tires for damage. If necessary, remedy the damage with a tire sealant.fDo not by any means continue to drive with defective tires.
fSealing the tire with tire sealant is only an emergency repair so you can drive to the nearest specialist workshop.The maximum permitted speed is 50 mph (80 km/h) .fDo not drive with tires in which the tire pressure drops again very quickly. In case of doubt, have tires checked by a specialist workshop.fDefective tires must be replaced immediately at an authorized Porsche dealer.Tires must never be repaired under any circumstances.fIf Tire Pressure Monitoring System is defective (e.g. defective wheel transmitter), contact an authorized Porsche dealer immediately and have the damage repaired. The tire pressure will not be monitored at all or will be monitored only partially when Tire Pressure Monitoring System is defective.
For information on warning messages on the multi- purpose display:fPlease see the chapter “OVERVIEW OF WARNING AND INFORMATION MESSAGES” on page 129.fIncomplete entries or selection of the wrong tires on the multi-purpose display affect the accuracy of warnings and messages.The settings in the tire pressure menu must be updated following a wheel change or changes in vehicle loading.fUse only the pressure differences shown in the “ Fill info” display in the Tire pressure menu or from the corresponding tire pressure warning when correcting the tire pressure.fTires can lose air over time without a tire defect being present. A tire pressure warning
will then appear on the multi-purpose display.Check the tire pressure at the next opportunity.
Warning light
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.The TPMS malfunction indicator is combined with the low tire pressure telltale.When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.fAlways check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
Maintaining Tire Pressure
WARNINGh
Attention to TPMS Malfunction Indicator
WARNINGh
14_991_Turbo_21.book Seite 106 Mittwoch, 9. April 2014 2:19 14

Instrument Panel and Multi-Function Display 107
The warning light in the instrument panel lights up: – When a loss in pressure has been detected.– In the event of a defect in Tire Pressure Monitoring or a temporary fault.– When learning new fitted wheels/wheel transmitters, as long as the vehicle’s own wheels have not yet been recognized.
The tire pressure warning light on the instrument panel goes out only when the cause of the fault has been rectified.
Overview of tire pressure monitoring functions
Tire Pressure Monitoring offers the following functions: – Display of the actual tire pressure when stationary and while the vehicle is in motion.– Tire pressure warnings in two stages (yellow and red warning).– In the “TPMS” menu, the settings “Fill info” (display of the deviation from the required pressure, refill pressure), “Tire type”, “Full load” and “Comfort press.” are available when the vehicle is stationary.
Tire pressure display on the multi-function display
Selecting the TPMS function on the multi-function display
The “ TPMS” function displays the temperature- dependent tire pressures (actual pressures) in the four wheels.You can watch the tire pressure rise as the temperature increases while driving.
Information
This display of the actual pressures is only for information.fUnder no circumstances should the tire pressures be changed based on this display.
Information
After the ignition is switched on, it can take up to approx. 1 minute until all tire pressures are displayed. Dashes (-.-) appear instead of the tire pressures.
1. Select the “TPMS” main menu.
14_991_Turbo_21.book Seite 107 Mittwoch, 9. April 2014 2:19 14

108 Instrument Panel and Multi-Function Display
Viewing current settings in the TPMS menu (only when vehicle is stationary) Viewing Fill info in the TPMS menu
You can read the tire pressures to be corrected on this display.
The tire pressure to be corrected (refill pressure) is indicated on the displayed wheel.
Example: If “–2 psi”/“–0.2 bar“ is displayed for the front right tire, 2 psi/0.2 bar/20 kPa must be added to this tire.
The displayed pressures take into account the tire temperature.fUse only the pressure values shown in the “ Fill info ” display in the “TPMS” main menu or from the corresponding tire pressure warning when correcting the tire pressure.
If the tires are not yet “taught”, the new required pressures are displayed instead of the actual differential pressures.
For information on teaching tires:fPlease see the chapter “SYSTEM LEARNING” on page 111.
1. Main menu “TPMS”.
2.Confirm “TPMS”.1.Main menu “TPMS”.
2.Confirm “TPMS”.
3.Select the “Fill info” menu and confirm.
14_991_Turbo_21.book Seite 108 Mittwoch, 9. April 2014 2:19 14

Instrument Panel and Multi-Function Display 109
Selecting tire type in the TPMS menu (type and size of fitted tire)
Exceeding the maximum tire speed could result in a tire burst, causing loss of control of the vehicle.fAlways observe the permissible maximum speed of the respective tire.fPorsche recommends obeying all traffic laws at all times to maintain the safety of yourself and all vehicle occupants.
Incomplete entries or selection of the wrong tires on the multi-function display affect correct indication of warnings and messages.fThe settings must be updated in the “ Tire pressure ” menu after changing a wheel, filling with tire sealant or adding air (after previous warning “ Check tires”). Please see the chapter “RED WARNING – “CHECK TIRES”” on page 112.
The new tire type and tire size must be selected even if the settings for the new set of wheels are the same as for the old wheels.
Option is selected.
Option is not selected.
The selected setting appears in the TPMS menu in the line “Tire type” (e.g. “20" (W)” with the setting option “20" Winter”).
Tire selection has only been completed successfully when the following message appears on the multi-function display (example):
“No tire pressure monitoring System is learning” .fPlease see the chapter “CHANGING A WHEEL AND REPLACING TIRES” on page 113.
Information
The message “Action cancelled” appears if the setting process is interrupted.
All entries made up to this point are lost, and the original settings remain in effect.
Before fitting tires with dimensions that are not already stored in the multi-function display, the missing information should be added to the multi-function display by your authorized Porsche dealer.fPlease contact an authorized Porsche dealer.fUse only tires approved by Porsche.
The available items in the tire pressure menu depend on the model type. For this reason, some of the selection options shown here may not be available on your multi-function display.
Exceeding Maximum Rated Tire Speed
Entering Tire Data and Display
WARNINGh
WARNINGh
1. Main menu “TPMS”.
2.Confirm “TPMS”.
3.Select “Tire type” and confirm.
4.Select “20" Summer” or “20" Winter” and confirm.
14_991_Turbo_21.book Seite 109 Mittwoch, 9. April 2014 2:19 14

110 Instrument Panel and Multi-Function Display
Selecting load in the TPMS menu
fAdapt the pressure of the tires to the selected load type.Please see the chapter “VIEWING FILL INFO IN THE TPMS MENU” on page 108.
Information
If this menu is not displayed, the specified tire pressures are valid for all types of vehicle load.
Selecting comfort/standard pressure in the TPMS menu
For speeds up to 165 mph (270 km/h), the tire pressures can be reduced to increase suspension comfort.If you select “ Comfort press.”, the TPMS system automatically uses lower pressure values when monitoring tire pressure.
If “ Comfort press.” is deactivated or standard pressure is activated, the standard required pressures suitable for speeds up to the maximum vehicle speed are automatically monitored.
The comfort tire pressures are included in the technical dataorin “ Fill info” when the “Comfort press.” menu is activated.
Prolonged driving at low tire pressure or even short-term driving at high speeds on tires which have too low a pressure is likely to result in a loss of control of your vehicle, either due to a failure to maintain directional control under side loads or due to tire failure.
Tires are inflated to comfort pressure at the factory, which is not suitable for driving at very high speeds.fAlways adjust the pressure in the tires to the standard pressure setting when driving at higher speeds.fRemember to adjust the setting in the Tire Pressure Monitoring System accordingly.
1. Main menu “TPMS”.
2.Confirm “TPMS”.
3. Full load
Full load is selected.
Full load
Partial load is selected.
Change or select the desired load type by enabling or disabling the “ Full load” box.
1.Main menu “TPMS”.
2.Confirm “TPMS”
3. Comfort pressure
Comfort pressure is selected.
Comfort press.
Standard pressure is selected.
Change or select comfort pressure/standard pressure by enabling or disabling the “ Comfort pressure” box.
Low Tire Pressure Loss of Control
WARNINGh
14_991_Turbo_21.book Seite 110 Mittwoch, 9. April 2014 2:19 14