2014 Peugeot 508 RXH key

18
508RXH_en_Chap00c_systeme-hybride_ed01-2014
Emergency starting with the
electronic key
When the electronic key is in the recognition
zone and your vehicle does not start after
pressing the "S
tA
R
t/
S
tO
P" button:
F

O
pen the housing below the "S
tA
R
t/
St

OP " button.
F

I
nsert the electronic key in the location A .
F

P
ress the "S
tA
R
t/
S
tO
P" button.
Emergency switch-off using the
electronic key
In the event of an emergency only, the engine
can be switched of without conditions. to d o
this, press and hold the "S
tA

R
t/
S
tO
P" button
for about 3 seconds.
In this case the steering column locks as soon
as the vehicle stops.
If the electronic key is no longer in the
recognition zone when you request switching
off the engine, a message appears in the
instrument panel.
F

P
ress and hold the "S
tA
R
t/
S
tO
P" button
for about 3 seconds if you want to force
switching off the engine (note that restarting
will not be possible without the key).
Electronic key not recognised by
the "Keyless Entry and Starting"
system
If the electronic key is no longer in the
recognition zone when driving or when you
(later) request switching off of the hybrid
system, a message appears in the instrument
panel.
Once the engine has started, you can
remove the electronic key and close the
housing. F

P
ress and hold the "S
tA
R
t/
S
tO
P" button
for about 3 seconds if you want to force
switching off of the hybrid system (note that
restarting will not be possible without the
electronic key in the recognition zone).
th

e electronic key must always remain
inside the vehicle while in use.
Hybrid system

37
508RXH_en_Chap00c_systeme-hybride_ed01-2014
Car washing machine or tunnel
Some car washing machines or tunnels (where the vehicle is moved for wards on a travelling track) require that the parking brake be "released" during
the wash.
Car washing machines or tunnels in which the
Diesel engine must be switched off.
With the hybrid system active, Ready lamp on, parking brake
released:
-

P
lace the gear selector in position N.
-

S
witch off the engine (press on S
tA
R
t/
S
tO
P or with the
vehicle's key if it does not have Keyless
e
n
try and Starting).
th

e parking brake is applied automatically and the Ready
lamp goes off in the instrument panel.
-

S
witch on the ignition again (press on S
tA
R
t/
S
tO
P or with
the key in the intermediate position) without your foot on the
brake pedal.
t
h
e Ready lamp remains off.
-

R
elease the parking brake using the manual control on the
centre console, while keeping your foot on the brake pedal.
-

S
witch off the ignition (press on S
tA
R
t/
S
tO
P without your
foot on the brake pedal, or using the key) checking that the
parking brake remains released. With the hybrid system active, Ready
lamp on, parking brake
released:
-

P
lace the gear selector in position N (Auto or Sport mode).
-

P
ress the brake pedal then the e
C
O OFF button.
Car washing machines or tunnels in which the
Diesel engine must not be switched off.
If the Diesel engine is not running, it restarts.
If the Diesel engine is running, it remains running without time
limit.
.
Hybrid system

53
508RXH_en_Chap01_controle-de-marche_ed01-2014
* According to country.
CHECK (vehicle autotest)
Automatic CHECK
With the key in the ignition on position, all of the
warning lamps for the functions tested are displayed.
th
ey are switched off after a few seconds.
At the same time, an automatic CHeC K
(vehicle autotest) is carried out.
In the presence of a fault
A "minor" fault has been detected: the warning
lamp(s) are displayed then go off.
You can start your vehicle; however, contact a
P
e

uge
Ot
dealer or a qualified workshop as
soon as possible.
A "major" fault has been detected: the
associated warning lamps(s) remain on
accompanied by the S
tO

P or S
eR
VIC
e

warning lamp.
Do not start your vehicle.
Call a P
e

uge
Ot
dealer or a qualified
workshop without delay.
Manual CHECK
Pressing the "CHECK" button on the instrument
panel starts the manual CHeC K (vehicle autotest).
th

is function enables you to recall at any time (with
the key in the ignition on position or with the engine
running), the alerts present.
the passenger's airbag deactivated warning
lamp* remains on while the airbag is deactivated.
With the engine running and the vehicle
moving, the instrument panel displays the
warning lamps (in the event of a fault).
If no "major" fault is found, you can start your
vehicle.
Lighting dimmer control
With the headlamps on, press button B to
increase the brightness of the instruments
and controls and the interior mood lighting or
button
A to reduce it.
As soon as the lighting reaches the required
level of brightness, release the button.
1
Monitoring

54
Service indicator
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen.
System which informs the driver when the
next service is due, in accordance with the
manufacturer's servicing schedule.th
e point at which the service is due is
calculated from the last indicator zero reset. It
is determined by two parameters:
-

t

he distance travelled,
-

t

he time elapsed since the last service.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the
spanner symbolising the service operations comes
on. t
h
e distance recorder display line indicates the
distance remaining before the next service is due.
Example: 1 700 miles (2 800 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on, the
screen indicates:
5 seconds after the ignition is switched on,
the spanner goes off ; the distance recorder
resumes its normal operation.
t
h
e screen then
indicates the total and trip distances.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
Illumination of the key is accompanied
by a message in the instrument panel
screen.
Monitoring

64
Setting the date and time
F Select the "Settings" menu.
F
I
n the secondary page, press on
" Time/Date ". F
Sel ect "Adjust time " or "Adjust date"
and modify the settings using the numeric
keypad, then confirm. F
P ress "
Confirm " to quit.
Monitoring

65
508RXH_en_Chap02_ouvertures_ed01-2014
System which permits central unlocking or locking of the vehicle using the lock barrel or from a
distance. It is also used to locate and start the vehicle, as well as providing protection against theft.
Remote control key
Unfolding the key
F First press this button to unfold the key.
Folding the key
F First press this button to fold the key.
If you do not press the button when folding
the key, there is a risk of damage to the
mechanism.
2
Access

66
508RXH_en_Chap02_ouvertures_ed01-2014
Unlocking the vehicle
Complete unlocking
Using the key
F turn the key to the front of the vehicle to unlock the vehicle.
F

P
ress the open padlock to unlock
the vehicle.
Using the remote control
Holding this button down opens the windows
automatically.
to a

void inadvertently locking the vehicle with
the windows open, contact a P
e

uge
Ot
dealer
to deactivate this function.
Using the electronic key
F With the electronic key on your person and in the recognition zone, pass your
hand behind the door handle to unlock the
vehicle, then pull on the handle to open the
d o o r.
Y

our passengers can also open their doors
with the exception of the boot, as soon as
the electronic key is in the recognition zone
around the vehicle.
un

locking is confirmed by rapid
flashing of the direction indicators for
approximately two seconds.
According to version, the door mirrors
unfold at the same time.
"Keyless en try and Starting" system
System that allows the opening, closing
and starting of the vehicle while keeping the
electronic key on your person. It can also be
used as a remote control.
Access

67
508RXH_en_Chap02_ouvertures_ed01-2014
Selective unlocking
F to unlock the driver's door only press the open padlock once.
Using the remote control
this is set via the instrument panel
screen configuration menu.
Complete unlocking is activated by
default.Using the electronic key
F to unlock only the driver's door with the electronic key on your person, pass your
hand behind the driver's door handle then
pull the handle to open the door.
F
t
o u
nlock the vehicle completely, pass your
hand behind one of the passenger door
handles, on the side of the vehicle where
the electronic key is located, then pull the
door handle.
ea

ch unlocking is confirmed by rapid
flashing of the direction indicators for
approximately two seconds.
According to version, the door mirrors
unfold at the same time as the first
unlocking action.
F
t
o u

nlock the other doors and the boot,
press the open padlock again
Accumulations (water, dust, grime,
salt...) on the inner sur face if the door
handle may affect detection.
If cleaning the inner sur face of the door
handle using a cloth does not restore
detection, contact a P
e

uge
Ot

dealer
or a qualified workshop.
A sudden splash of water (stream of
water, high pressure jet washer, …)
may be identified by the system as the
desire to open the vehicle.
2
Access