
51
2
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
 Back-up  control 
  Driver's  door 
   Insert the key in the lock to lock or unlock the  door.   If your vehicle has an alarm, it will not be activated and deactivated on locking and unlocking the vehicle.  Opening a door will trigger the alarm, which can be stopped by switching on the ignition.  
  Passenger  doors 
   On the rear doors, check that the child lock is not on.    Insert the integral key into the latch on the edge of the door and turn it an eighth of a turn to the right, for the right hand side and to the left for the left hand side.    Close the doors and check from the outside that they have locked correctly.   
 For mechanically locking and unlocking the doors in the event of a fault with the central locking system or a battery failure.  
  If your vehicle has an alarm, it will not be activated and deactivated on locking and unlocking the vehicle.  Opening a door will trigger the alarm, 
which can be stopped by switching on the  ignition.    

52
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
  Changing  the  battery 
Do not throw the remote control batteries away, they contain metals which are harmful to the environment.  Take them to an approved collection point. 
 If the battery is flat, you are informed by lighting of this warning lamp in the instrument panel, an audible signal and a message in the screen.    Unclip the cover using a screwdriver in the cutout.    Remove the cover.    Extract the flat battery from its location.    Place the new battery into its location observing the original direction.    Clip  the  cover  in  place.    
Remote control problem 
  Reinitialisation 
   Switch off the ignition.    Turn the key to position  2 (Ignition) .    Press the closed padlock immediately for a few seconds.    Switch off the ignition and remove the key from the ignition switch.   The remote control is fully operational again.  
 Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle.    First of all, use the key in the lock to unlock 
or lock your vehicle.    Then, reinitialise the remote control.   If the problem persists, contact a PEUGEOT dealer as soon as possible. 
 Battery ref.: CR1620 / 3 volts.  

55
2
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
  Complete  unlocking 
                "Keyless Entry and Starting" on your person 
  System that allows the opening, closing and starting of the vehicle while keeping the electronic key on your person.  
   With the electronic key on your person and in the recognition zone  A , pass your hand behind one of the front door handles to unlock the vehicle, then pull on the handle to  open  the  door.    
The central locking does not take place:    -   if  the  ignition  is  on,   -   if one of the doors or the boot is still open,   -   if the key for the Keyless Entry and Starting system has been left inside the vehicle.   When the vehicle is locked, if it is unlocked inadvertently, it will lock itself again automatically after about thirty seconds unless a door is opened. 
 And if your vehicle has an alarm, this is not reactivated.  The folding and unfolding of the door mirrors by the remote control can be deactivated by a PEUGEOT dealer or a qualified workshop.  
  Selective  unlocking 
  When selective unlocking of the driver's door is activated.    With the electronic key in the driver's door zone, pass your hand behind the driver's door handle to unlock just the driver's door, then pull on the door handle to open the d o o r.    With the electronic key in the passenger's door zone, pass your hand behind the passenger's door handle to unlock the whole vehicle, then pull on the door handle to open the door.   
  By default, complete unlocking is activated.  This setting is done in the  "Driving assistance"  menu, then  "Vehicle settings"and  "Vehicle access" .  
  Use this button for access to additional  information.  
  Unlocking is confirmed by rapid flashing of the direction indicators for a few seconds.  Depending on version, the door mirrors unfold, the alarm is deactivated   . 

61
2
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
      
Back-up key 
  Unlocking/locking  using  the 
integral key with Keyless 
Entry and Starting 
 The integral key is used to lock and unlock the vehicle when the electronic key cannot operate:    -   cell battery flat, vehicle battery discharged or disconnected, ...   -   vehicle located in an area with strong electromagnetic  signals.     Maintain a pull on button  1 , to extract the integral key  2 .  
Locking the driver's door 
   Insert the integral key in the door lock, then turn it to the rear.   
  Unlocking the driver's door 
   Insert the integral key in the door lock, then turn  it  to  the  front.     
  Locking the passenger doors 
   Open the doors.    For the rear doors, check that the child lock is not on (see the "Child safety" section).    Insert the integral key in the latch located on the edge of the door and turn it an eighth of a turn to the right for the right hand door, and to the the left for the left hand door.    Close the doors and check that the vehicle has locked correctly from the outside.   
  Unlocking the passenger doors 
   Pull the interior door opening control.    
  If the alarm is activated, the audible signal on opening a door with the key (integral with the remote control) will stop when the ignition is switched on.    

62
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
            Changing  the  cell  battery 
  Battery ref.: CR2032 / 3 volts.  This replacement battery is available from a PEUGEOT dealer or a qualified workshop.  A message appears in the instrument panel screen when replacement of the battery is needed.    Unclip the cover using a small screwdriver at the cutout.    Lift off the cover.    Remove the flat battery from its location.    Fit the new battery into its location observing the original direction of fitment.    Clip the cover onto the casing.    
Do not throw the remote control batteries away, they contain metals which are harmful to the environment.  Take them to an approved collection point. 
 Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. 
   Place the mechanical key (integral with the remote control) in the lock to unlock your vehicle.    Remove the mat under 12 V socket.    Place the electronic key in the housing provided.    Switch on the ignition by pressing START/S T O P.    The electronic key is fully operational again. 
Remote control problem - 
reinitialisation 
  If the problem persists, contact a PEUGEOT dealer or a qualified workshop as soon as possible.    

63
2
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
Lost keys, remote control, electronic key 
 Visit a PEUGEOT dealer with the vehicle's V5 registration document and your personal identification documents.  The PEUGEOT dealer will be able to retrieve the key code and the transponder code required to order a replacement.  
  Remote  control 
 The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.  Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from 
working and the remote control would have to be reinitialised.  The remote control does not operate when the key is in the ignition, even when the ignition is switched off.  
  Locking  the  vehicle 
 Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.  As a safety precaution (with children on board), remove the key from the ignition or take the electronic key when you leave the vehicle, even for a short time.  
  Electrical  interference 
 The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic fields, ...  
  Anti-theft  protection 
 Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.  Don't forget to turn the steering to engage the steering lock.  
  When purchasing a second-hand vehicle 
 Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.    

66
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
  Deactivation 
   Press this unlocking button on the  remote  control.   
  or  
   Unlock the vehicle using the "Keyless Entry and  Starting"  system.   
 If the vehicle self-locks automatically (occurs after 30 seconds if a door or the boot is not opened), the monitoring system is not reactivated automatically. To reactivate the system, it is necessary to unlock and then lock the vehicle again, using the remote control or the "Keyless Entry and Starting" system.   
  The monitoring system is deactivated: the indicator lamp in the button is off and the direction indicators flash for about 2 seconds. 
  Total  protection 
  Activation 
   Lock the vehicle using the 
remote  control.  
 or    Lock the vehicle using the "Keyless Entry and  Starting"  system.   
  The monitoring system is active: the indicator lamp in the button flashes once per second and the the direction indicators come on for about 2 seconds.  After an instruction to lock the vehicle using the remote control or the Keyless Entry and Starting system, the exterior perimeter monitoring is activated after a delay of 5 seconds, the interior volumetric monitoring after 45 seconds.  
  If an opening (door, boot, bonnet...) is not closed fully, the vehicle is not locked but monitoring will be activated after a delay of 45  seconds.  
Switch off the ignition and get out of the vehicle.  

67
2
Access
308_EN_CHAP02_OUVERTURES_ED02-2013
  Protection  -  exterior 
perimeter monitoring only 
  Volumetric  monitoring 
Deactivation The tilt alarm is deactivated as well, if your vehicle has it. 
   Switch of the ignition and within ten seconds press this button until its indicator lamp is on fixed. 
   Get out of the vehicle.    Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting"  system.   Only the exterior perimeter protection system is active: the indicator lamp in the button flashes once per second.  To be effective, this deactivation must be done every time the ignition is switched off.  
  Deactivate the interior volumetric monitoring (and tilt monitoring if your vehicle has it) to avoid unwanted triggering of the alarm in certain cases such as:    -   occupant(s)  present  in  the  vehicle, 
  -   leaving a window partially open,   -   washing  your  vehicle,   -   changing  a  wheel,   -   towing  your  vehicle,   -   transport  on  a  ferry.   
Reactivation The tilt alarm is reactivated as well, if your vehicle has it.    Deactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the Keyless Entry and Starting  system.  
 The indicator lamp in the button goes off.    Reactivate the full alarm system by locking the vehicle using the remote control or the "Keyless Entry and Starting" system.   The indicator lamp in the button flashes once per  second  again.