2014 Peugeot 208 belt

.
Direction indicators 128
Hazard warning lamps 1 28
em

ergency or assistance call
1
29
H or n


129
Tyre under-inflation detection

1
30
e

SC system
1
33
Front seat belts

1
36
Airbags


139
Child seats

1
43
Deactivating the passenger's front airbag
1

45
ISOFIX child seats

1
51
Child lock

1
55
Safety
Temporary puncture repair kit 156
Changing a wheel 1 61
Snow chains

1
68
Changing a bulb
1

69
Changing a fuse
1

76
Battery
1

82
el

ectrical energy economy mode
1
85
Changing a wiper blade
1

86
Towing the vehicle

1
87
Towing a trailer

1
89
Fitting roof bars

1
91
Advice on care and maintenance
1

92
Accessories


193
Practical information
Bonnet 19 6
Petrol engines 1 97
Diesel engines
1

98
Fuel tank

1
99
Misfuel prevention (Diesel)
20

1
Running out of fuel (Diesel)

2
03
AdBlue
® additive and SCR system
(Blue HDi Diesel) 2 04
Checking levels

2
12
Checks
2

15
Checks
general information 2 17
Petrol engines / weights 2 18
Diesel engines / weights

2
19
Dimensions


220
Identification markings
2

21
Technical data
emergency or assistance 223
7-inch Touch screen 2 25
Audio system / Bluetooth

2
97
Audio system

3
23
Audio equipment and telematics
Alphabetical index
Contents

5
Interior
Boot fittings 78 -79
- r ear parcel shelf
-
hooks
-

b
oot lamp
-
la

shing rings Front seats

5
6 -58
Front armrest
5
8
Child seats
1
43 -154
ISOFIX child seats

1
51-154
el

ectric child lock
1
55 Airbags


139-142
Interior fittings 7
4-77
- g love box
-

1
2 V accessory socket
-
u
S
B port / Auxiliary socket
-
mats
Deactivating the passenger's front airbag


140
Seat belts
1

36-138
Warning triangle
8

0
Bench rear seat
5

9-60
Rear seats
6

1
.
Over view

26
Warning / indicator lampStateCause Action / Observations
Engine oil
pressure fixed.
There is a fault with the engine
lubrication system. You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a P
e

uge
O
T
dealer or a qualified workshop.
Battery charge fixed. The battery charging circuit has a
fault (dirty or loose terminals, slack or
cut alternator belt, ...). The warning lamp should go off when the engine is
started.
If it does not go off, contact a P
e

uge
O
T dealer or a
qualified workshop.
Low fuel level
fixed with the needle
in the red zone. There remains approximately 5 litres
of fuel in the tank.
At this point, you begin to use the fuel
reserve. Refuel as soon as possible to avoid running out of
fuel.
This warning lamp will come on every time the ignition
is switched on, until a sufficient addition of fuel is
made.
Fuel tank capacity: approximately 50 litres
.
Never continue to drive until you run out of fuel, as
this could damage the emission control and injection
systems.
flashing with the
needle in the red
zone.
There remains very little fuel in the
tank.
Under-inflation fixed. The pressure in one or more wheels
is too low. Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
+ flashing then fixed,
accompanied by the
Service warning lamp.The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels.
un

der-inflation detection is not assured.
Have the system checked by a P
e

uge
O
T dealer or a
qualified workshop.
Monitoring

27
Warning / indicator lampStateCause Action / Observations
Airbags on temporarily. This lamp comes on for a
few
seconds when you turn on the
ignition, then goes off. This lamp should go off when the engine is started.
If it does not go off, contact a P
e

uge
O
T dealer or a
qualified workshop.
fixed. One of the airbag or seat belt
pretensioner systems has a fault. Have it checked by a P
e

uge
O
T dealer or a qualified
workshop.
Seat belt(s)
not fastened /
unfastened
fixed then flashing
accompanied by an
increasing audible
signal. A seat belt has not been fastened or
has been unfastened.
Pull the strap then insert the tongue in the buckle.
Door(s) open
fixed, associated with
a message identifying
the door, if the speed is
below 6 mph (10 km/h). A door or the boot is still open. Close the door or boot.
fixed, associated with a
message identifying the
door, and accompanied
by an audible signal
if the speed is above
6
mph (10 km/h).
1
Monitoring

57
F To raise the head restraint, pull it upwards.
F T o remove the head restraint, press the
lug
A and pull the head restraint upwards.
F

T
o put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back.
F

T
o lower the head restraint, press the lug A
and the head restraint at the same time. The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Access to the rear seats
(3-door)
Head restraint height
ensure that no person or object
prevents the seat slide from returning
to its initial position; the return to this
position is necessary for longitudinal
locking.
Check that the seat belt has reeled in
correctly so as to not impede access for
passengers to the rear seats.
F

Pull
only this control upwards to fold the
seat back and move the seat for ward.
When put back in place, the seat returns to its
initial position.
3
Comfort

59
Folding the backrestRepositioning the seat backrest
F Straighten the seat backrest 2 and secure it.
F C heck that the red indicators, located next
to the controls 1 , are no longer visible.
F
u
n
buckle and return the outer seat belts to
the sides of the backrest.
F
M
ove the front seats for ward if necessary.
F
P
osition the outer seat belts on the
backrest and buckle them.
F

P

lace the head restraints in the low position. F
P
ress both controls 1 simultaneously to
release the seat backrest 2 .
F

F

old the seat backrest 2 on to the
cushion


3 .
When repositioning the backrest,
ensure that the seat belts are not
trapped.
Rear bench seatBench seat with fixed one-piece cushion and folding one-piece backrest.
When folding the seat, the centre seat
belt should not be fastened, but laid out
flat on the seat. The rear seat cushion does not fold,
just the seat backrest can be folded to
increase the boot loading space.
3
Comfort

61
Rear seats
F Move the corresponding front seat for ward if necessary.
F

C
heck that the corresponding outer seat
belt is positioned correctly against the
backrest and buckle it.
F

P
lace the head restraints in the low
position. F
S traighten the seat backrest 2
and secure it.
F C heck that the red indicator, located next to
the control 1 , is no longer visible.
F
u
n
buckle and reposition the outer seat belt
on the side of the backrest.
When repositioning the seat backrest,
take care not to trap the seat belts.
F
P ress control 1 to release the seat
backrest 2.
F

F
old the seat backrest 2 on to the
cushion


3.
Folding the backrestRepositioning the seat backrest
Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.
When folding the seat, the centre seat
belt should not be fastened, but laid out
flat on the seat The rear seat cushion does not fold,
just the seat backrest can be folded to
increase the boot loading space.
3
Comfort

97
Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The
e ngine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Operation
Going into engine STOP
mode
The "ECO" warning lamp comes
on in the instrument panel and the
engine goes into standby:
-

for e-HDi Diesel engines :
●

w

ith a manual gearbox , at speeds
below 12 mph (20 km/h), when you
place the gear lever into neutral, and you
release the clutch pedal,
●

w

ith an electronic gearbox , at speeds
below 5 mph (8 km/h), when you press
the brake pedal or place the gear lever
into position N ,
-

for e-VTI and e-THP petrol engines and
Blue HDi Diesel engines, with the vehicle
stationary. Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key. For your comfort, during parking
manoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
STOP mode does not affect the
functionality of the vehicle, such as for
example, braking, power steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
- t
he driver's door is open,
-

t
he driver's seat belt is not fastened,
-

t
he vehicle has not exceeded 6 mph
(10
km/h) since the last engine start
using the key,
-

t
he engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
d

emisting is active,
-
s

ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine
is needed to assure control of a system.
A time counter calculates the sum
of the periods in STOP mode
during a journey. It rests itself
to zero every time the ignition is
switched on with the key. The "ECO"
warning lamp flashes for
a few seconds then goes off.
This operation is perfectly normal.
4
Driving