2014 PEUGEOT 2008 Owners Manual

71
3
Comfort
Interior fi ttings
1. Illuminated glove box (see details on the following page) 2. Open storage compartment (depending on equipment)3. 12 V accessory socket (120 W )
Observe the maximum power rating to avoid damaging your accessory. 4. USB por t / Auxiliar y socket / Auxiliar y socket (see details on following pages) 5. Open storage compartments6. Cup holder7. Closed storage compartment8. Door pockets

72
Comfort
12 V accessory
socket
Illuminated glove
box
It has dedicated locations for storing a water bottle, the vehicle's handbook pack... Its lid has locations for a pair of glasses...  To open the glove box, raise the handle. It is illuminated when the lid is opened (depending on version). It houses the front passenger airbag deactivation switch A . If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same conditioned air as the vents in the passenger compartment.
 To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and connect a suitable adaptor.

73
3
Comfort
Additional USB port
Depending on version, your vehicle may be fitted with a second USB port, located on the centre console. When in use, the USB por t / Jack auxiliar y socket must not be used to charge a por table device (risk of overload).
USB port / Jack auxiliary socket
This connection box, consisting of a JACK auxiliary socket and a USB port, is located on the centre console. It allows the connection of portable device, such as a digital audio player of the iPod ® type ® type ®
or a USB memory stick. It reads the audio files which are transmitted to your audio system and played via the vehicle's speakers. You can manage these files using the steering mounted controls or the audio system control panel and display them in the instrument panel screen.
When the USB port is used, the portable device charges automatically.
For more information on the use of this
system, refer to the "Audio equipment and telematics" section.

74
Comfort
Mats
To remove the mat on the driver's side:  move the seat as far back as possible,  unclip the fixings,  remove the mat.
Removal Refitting
To avoid any risk of jamming of the pedals: - only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, - never fit one mat on top of another. The use of mats not approved by PEUGEOT may inter fere with access to the pedals and hinder the operation of the cruise control / speed limiter.
To refit the mat on the driver's side:  position the mat correctly,  refit the fixings by pressing,  check that the mat is secured correctly.
Removable carpet protection.

75
3
Comfort
B o o t fi t t i n g s
1. High load retaining net (depending on version) (see following page for details) 2. Luggage cover Luggage cover Luggage cover (see following page for details) 3. Boot lamp4. Retaining strap5. Stowing rings (depending on version)6. Retaining net

76
Comfort
Rear parcel shelf
This consists of two sections which can be folded back on each other. To store it, fold it on itself and place it at the bottom of the boot.
To gain access to the boot from the rear seats:  raise the front section of the rear parcel shelf using the grip A .
High load retaining net
Hooked onto the upper fixings and onto the lower rings or the lugs, this permits use of the entire loading volume up to the roof:
- behind the rear seats (row 2), - behind the front seats (row 1) when the rear seats are folded.
When positioning the net, check that the strap loops are visible from the
boot; this will make slackening or tightening easier.

77
3
Comfort
Never use the ISOFIX ring intended for fixing the upper strap of child seat to the Top Tether.
To use it in row 1:  open the covers of the upper fixings 1 ,  unroll the high load retaining net,  position one of the ends of the net's metal bar in the corresponding upper fixing 1 , then do the same with the other end,  slacken the straps fully,  fix the snap hook of each of the straps on the corresponding lug 3 , located under the bench seat cushion,  fold the rear seats,  tighten the straps without raising the
bench seat,  check that the net is hooked and tightened c o r r e c t l y.
To use it in row 2:  fold or remove the load space cover,  open the covers of the upper fixings 2 ,  unroll the high load retaining net,  position one of the ends of the net's metal bar in the corresponding upper fixing 2 , then do the same with the other end,  attach the hook of each of the net's straps in the corresponding lower ring 4 ,  tighten the straps,  check that the net is hooked and tightened c o r r e c t l y.

78
Comfort
Warning triangle (stowing)
Before leaving your vehicle to set up and install the triangle, put on your high visibility vest.
The dimensions of the triangle (once folded) or
its storage box must be: - A : length = 438 mm, - B : height = 56 mm, - C : width = 38 mm. To use the triangle, refer to the manufacturer's instructions.
Placing the triangle in the road
The location for stowing a folded triangle or its box is under the front seat or under the boot carpet (depending on version).
Distance from your vehicle (in metres)
Road
Motor way
DayNight
50 m 80 m 150 m
These are the internationally recognised values. Use the triangle in line with local driving regulations.
The triangle is available as an accessory, contact a PEUGEOT dealer or a qualified workshop.
 Place the triangle at a distance behind the vehicle, as shown in the table below, according to the type of road and the level of ambient light.