2014 NISSAN QUEST lock

6To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
esseNtial i Nfor matio N
LOOSe Fue L CaP

A LOOS e Fue L CaP warning message will appear
in the vehicle information display
01 when the

fuel-filler cap is not tightened correctly.


To tighten, turn the cap clockwise until a single click
is heard.


The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button
02 is pressed for about 1 second.

If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.For more information, refer to the “Instruments and controls (section 2)”
and the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.
01
02
Fue
L-FILLer DOOr
To open the fuel-filler door, pull the release 01
located on the lower instrument panel to the left of
the steering wheel.


The fuel-filler door is located on the driver’s side of
the vehicle.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
1490690_14_Quest_QRG_072513.indd 67/25/13 9:23 AM

7
01
03
04
05
06
02
NISSaN INTeLLIGeNT K eY® SYST eM
The NISSAN Intelligent k ey® System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent k ey is with you
(that is, in your pocket or purse).

The operating range of the Intelligent k ey is within
31.5 in (80 cm) from each request switch.


To lock the vehicle, push either door handle request
switch
01 or the liftgate request switch 02 or press

the
button 03 on the key fob.


To unlock the vehicle, perform one of the
following procedures:
•
Push either door handle request switch
01 or the

liftgate request switch 02; the corresponding door
will unlock. Push the request switch again within 1
minute; all other doors will unlock, or
•
Press the

button 04 on the key fob to unlock the

driver’s side door. Press the button 04 again

within 1 minute; all other doors will unlock.


To open the power liftgate (if so equipped), press the
button 05 for more than 1 second.


The Intelligent k ey can also be used to activate the
panic alarm by pressing and holding the
button 06

for more than 1 second. Once activated, the panic
alarm and headlights will stay on for a period of time.
INTELLIGENT k EY BATTERY DIS cHARGE


If the battery of the Intelligent k ey is discharged, or
environmental conditions interfere with the Intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (ParK) position.
2. Firmly apply the foot brake.
3.
Touch the ignition switch with the Intelligent k ey and
a chime will sound.
4.
Within 10 seconds after the chime sounds, push the
ignition switch while depressing the brake pedal and
the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
f irst drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 77/25/13 9:23 AM

9
FrONT PO wer SeaT aDJ uSTM eNTS (if so equipped)

To slide the seat forward or backward, push the
control switch
01 forward or backward.


To adjust the angle of the seatback, push the switch

02 forward or backward.
S EAT LIFTER (if so equipped for driver’s seat)

To raise or lower the height of the seat, push the switch 01 up or down.


To raise or lower the front portion of the seat, push the front or back end of the switch 01 up

or down.
POWER L UMBAR SUPPORT (if so equipped for driver’s seat)

To adjust the seat lumbar area, push the front or back portion of the switch 03.

For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
010203
PO wer LIFTGa Te reLeaSe (if so equipped)
Use one of the following methods to open the liftgate:

Press the button 01 on the NISSAN Intelligent
key® for more than 1 second.

Once unlocked, push the liftgate opener switch 02
while
carrying the Intelligent k ey with you.

From inside the vehicle, push the power liftgate switch

03 located on the instrument panel to the left of the
steering wheel.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
03
02
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 97/25/13 9:23 AM

10
FOLDING THe 2ND rOw S eaTS

Secure the seat belts on the seat
belt hooks
01 on the side wall.


To fold down the seatbacks, pull the lever 02 on the

2nd row seat.


To return the seatbacks, lift up each seatback and
push it to the upright position until it is latched.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
02
2ND r Ow S eaT aDJ uSTM eNTS
To slide the seat forward or backward, pull the lever
01 up and hold it while you slide the seat forward

or backward to the desired position.

Release the lever to lock the seat in position.


To adjust the angle of the seatback, pull the lever
02 up and lean back. To bring the seatback forward,

pull the lever up and lean your body forward.

Release the lever to lock the seatback in position.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
eNTer /e XIT TH e 3rD rOw S eaTS
The 2nd row seats can tilt and slide forward for easy
entry/exit to/from the 3rd row seats.


To enter or exit the 3rd row seat, pull the lever
01 or 02 up to tilt down the seatback and slide

the seat forward.


Return and lock the 2nd row seats by sliding the seats
to the rearmost position and tilting up the seatback
after use.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.01
02
02
01
first drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 107/25/13 9:23 AM

25
01 Touch screen display.

02 DeST
– Press to enter a destination.

03 INFO
– Press to display the vehicle, traffic, weather or voice recognit\
ion information.

04 S
eTTING – Press to access the system settings.

05 Multi-function controller – Turn to highlight an item on the screen, press to select the
highlighted item or scroll the map.

06 – Press to switch to the zoom mode to change the map scale. Use the center dial
to adjust the map scale. Turn clockwise to zoom in. Turn counterclockwise to zoom out.

07 r
OuTe – Press to access guidance control functions (guidance cancellation\
, route
priority, waypoint setting on the route, etc.).

08 MaP – Press to display the map. While following a programmed route, press multiple
times to change the type of route information.

09 ST
aTu S – Press multiple times to display audio information with either the \
air
conditioner status, fuel economy or navigation directions.

10 OFF – Press to switch between the day screen (bright) and the night
screen (dark). Press and hold to turn off the display. Press again to turn on the display.

11 BaCK – Press to return to the previous screen. In a settings screen, this\
button can
also be used to apply the setting. In a character input screen, this button can also
delete the characters that have been entered.

12 VOICe – Press to hear the current guidance for a programmed route.
For more information, refer to the Navigation System Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 257/25/13 9:24 AM