9
AUTOMATIC DRIVE POSITIONER (if so equipped)
Two positions for the driver’s seat and outside
mirrors can be stored in the automatic drive
positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat and outside mirrors to the desired positions using the adjusting
switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• The driver’s seat and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your NISSAN Intelligent Key®.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
FRONT SEAT ADJUSTMENTS
MANUAL SEATS (Passenger’s side only)
To slide the seat forward or backward, pull up on
the lever 01 under the front of the seat and slide
forward or backward. Release the lever to lock the
seat in position.
To adjust your seatback forward or backward, lift the
lever 02 on the side of the seat.
Release the lever when you have found a comfortable
angle and the seat belt fits properly.
POWER SEATS (Driver’s side only)
To slide the seat forward or backward, push the control switch
03
forward or backward.
To recline the seatback, push the switch
04 forward or backward.
SEAT LIFTER
To adjust the angle of the front seat cushion or
height of the seat, push the front or rear end of the
switch
03 up or down.
LUMBAR SUPPORT
To adjust the seat lumbar support, push the front or back end of the switch
05.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
01
02
030405
1591421_14d_Murano_QRG_012714b.indd 91/27/14 3:11 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
