2014 MERCEDES-BENZ SL-Class reset

Assigning a favorites button
X To assign a favorites button: press the
0066 button.
X Select Settings
Settings by turning 00790052007Athe
COMAND controller and press 0098to
confirm.
X Select Assign as Favorite
Assign as Favorite and press
0098 to confirm.
The list of predefined functions appears.
The dot 003Bindicates the currently selected
function.
X Select the function by turning 00790052007Athe
COMAND controller and press 0098to
confirm.
The favorites button is assigned the
selected function.
X Example: to call up a favorite: press the
007D favorites button.
This calls up the predefined function.
You can select the following predefined
functions in a menu:
R SplitView on/off SplitView on/off : you can switch the
screen view for the front passenger on or
off.
R Display On/Off
Display On/Off : you can switch the
display off or on.
R Full screen: 'Clock'
Full screen: 'Clock': you can call up
the full screen with the clock.
R 00A7Menu Menu: you can call up the online and
Internet functions.
R Full screen: 'Map'
Full screen: 'Map' : you can call up the
full screen with the map.
R Spoken Driving Tip
Spoken Driving Tip : you can call up the
current driving recommendation.
R Display
Display Traffic
TrafficMessages
Messages : you can call
up traffic reports.
R Navigate Home
Navigate Home: you can start route
guidance to your home address if you have
already entered and saved the address
(Y page 332). R
Detour Menu
Detour Menu: you can call up the Detour
menu and then block a section of the route
and recalculate the route ( Ypage 354).
R Compass Screen Compass Screen : you can call up the
compass. Importing/exporting data
General notes !
Never remove the stick or card when
writing data to the USB stick or the memory
card. You may otherwise lose data.
Using this function, you can:
R transfer your personal COMAND data from
one system/vehicle to another
R make a backup copy of your personal data
(export data) and load it again (import
data).
R protect your data from unwanted export by
activating a pin prompt (presetting:
deactivated 0053).
You can either use an SD memory card or a
USB storage device (e.g. a USB stick) as
temporary storage.
Activating/deactivating PIN protection X
Press the 0066button.
The system menu appears.
X Select Settings Settings by turning 00790052007Athe
COMAND controller and press 0098to
confirm. 314
System settingsCOMAND

X
Select Import/Export Data
Import/Export Data and press
0098 to confirm.
X Select Activate PIN Protection
Activate PIN Protection and
press 0098to confirm.
Activate 0073or deactivate 0053PIN
protection. When activating PIN protection,
you will be prompted to enter a PIN. X
Enter a 4-digit PIN, select 0054and press
0098 to confirm.
You will be prompted to enter the PIN
again.
X Re-enter the PIN, select 0054and press
0098 to confirm.
The PIN prompt now protects your personal
data from unwanted export.
i If you deactivate your PIN protection, you
will first be prompted to enter your PIN. If
you have forgotten your PIN, a Mercedes-
Benz service station can deactivate your
PIN protection for you. Alternatively, you
can deactivate PIN protection by resetting
your personal COMAND data
(Y page 316). Importing/exporting data
X
Insert the SD memory card (Y page 448).
or
X Connect a USB device (e.g. a USB memory
stick) ( Ypage 448).
X Press 0066.
The system menu appears.
X Select Settings Settings by turning 00790052007Athe
COMAND controller and press 0098to
confirm.
X Select Import/Export Data
Import/Export Data and press
0098 to confirm.
X Select Import Data
Import Data orExport Data
Export Data and
press 0098to confirm. System settings
315COMAND Z

If PIN protection is activated, a PIN prompt
appears when you select Export Data
Export Data.
X Enter the PIN, select 0054and press0098to
confirm.
You can now proceed in the same way as if
PIN protection was deactivated.
X To select a preset: selectMemory Memory Card
Cardor
USB Storage
USB Storage and press0098to confirm.
X Select All Data
All Data and press0098to confirm.
This function exports all the data to the
selected disc.
or
X Select the data type and press 0098to
confirm.
Depending on the previous entry, select the
data type for the export 0073or not 0053.
X Select Cont.
Cont. and press 0098to confirm.
i Personal music files in the MUSIC
REGISTER cannot be saved and imported
again using this function. Reset function
You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. In addition, any
activated PIN protection, which you have
used to protect your data against unwanted
export, will be deactivated. Resetting is recommended before selling or transferring
ownership of your vehicle, for example.
Data on the internal hard drive, e.g. music
files in the MUSIC REGISTER, will be deleted.
You can also delete music files from the
MUSIC REGISTER using the "Delete all music
files" function (Y page 462).
X Press the 0066function button.
X Select System
System by turning 00790052007Athe
COMAND controller and press 0098to
confirm.
X Select Reset
Reset and press 0098to confirm.
A warning message appears asking
whether you wish to reset.
X Select Yes YesorNo
No and press 0098to confirm.
If you select Yes
Yes, a prompt will appear again
asking whether you really wish to reset to
the factory settings.
X Select Yes YesorNo No and press 0098to confirm.
If you select Yes
Yes, a message will be shown.
COMAND is reset and restarted.
If you select No No, the process will be
canceled. Vehicle functions
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your COMAND
system may not be equipped with all the
features described. 316
Vehicle functionsCOMAND

Resetting all adjustments
X
Select the seat ( Ypage 319).
X Select Reset All
Reset All by turning00790052007Athe
COMAND controller and press 0098to
confirm.
A prompt appears.
X Select Yes
Yes orNo No and press 0098to confirm.
If you select No
No , the process will be
canceled.
After you select Yes Yes, all seat adjustments
are reset to the default values (factory
setting). Rear view camera
The rear view camera is only an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and
parking. When maneuvering or parking, make
sure that there are no persons, animals or
objects in the area in which you are
maneuvering.
The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
R your vehicle is equipped with a rear view
camera.
R COMAND is switched on
R the Activation by R gear
Activation by R gear function is
activated.
If the function is activated, the COMAND
display will automatically switch back to the previously selected display as soon as you
shift out of reverse gear.
i
For further information on the rear view
camera, see separate vehicle Operator's
Manual.
X Press the 0066function button.
The system menu appears.
X Select Settings
Settings by turning 00790052007Athe
COMAND controller and press 0098to
confirm.
X Select Rear RearView View Camera
Camera and press 0098to
confirm.
X Select Activation by R gear
Activation by R gear and press
0098 to confirm.
The function is switched on 0073or off 0053,
depending on the previous status. Night View Assist Plus
On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
X Switch on COMAND (Y page 299).
X Activate Night View Assist Plus, see the
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
X To adjust the brightness: select
Brightness
Brightness by turning00790052007Athe COMAND
controller and press 0098to confirm.
X Turn 00790052007A the COMAND controller and
press 0098to confirm.
X Switching automatic activation on/off:
select Night View Assist Auto. Night View Assist Auto.
Activation
Activation and press0098to confirm.
Switch the option on 0073or off 0053.
Option switched on: while using other
functions e.g. the navigation system, Night
View Assist Plus is active in the
background. In the dark, in unlit
surroundings and at speeds in excess of
37 mph (60 km/h), the Night View image 322
Vehicle functionsCOMAND

Selection Action
From Personal
From Personal
POIs POIs X
Enter a
destination from
the personal POIs
(Y page 347). Using map Using map X
Enter a
destination using
the map
(Y page 334). Using Geo- Using Geo-
Coordinates Coordinates X
Enter a
destination using
the geo-
coordinates
(Y page 334). X
Select POI and press 0098to confirm.
After selecting a POI or entering a
destination, the address of the waypoint is
displayed.
After entering a destination using the map,
the address entry menu is displayed. OK
OK is
highlighted. X
To accept the waypoint: confirmOK OKby
pressing 0098.
Once you have accepted the waypoint, it is
entered in the waypoint menu.
X To display the details: selectDetails Details by
turning 00790052007Athe COMAND controller and
press 0098to confirm.
X To make a call: selectCall Callwith the
COMAND controller and press 0098to
confirm. COMAND switches to telephone
mode (Y page 392).
i This menu item is available if the waypoint
has a telephone number and if a mobile
phone is connected to COMAND
(Y page 386).
X To call up the map: selectMap Mapwith the
COMAND controller and press 0098to
confirm.
X You can move the map and select the
destination.
X To store the waypoint in the destination
memory: selectPresets Presets with the
COMAND controller and press 0098to
confirm (Y page 367). Waypoint menu with two waypoint entries
Editing waypoints
You can:
R
change waypoints
R change the sequence in the waypoint menu
R delete waypoints Navigation
337COMAND Z

X
To delete a route: selectDelete
Delete in the
menu by turning 00790052007Athe COMAND
controller and press 0098to confirm.
A prompt appears asking whether the route
should be deleted.
X Select Yes
Yes orNo No and press 0098to confirm.
If you select Yes
Yes , the route will be deleted.
If you select No
No , the process will be
canceled.
Scanning the memory The SD memory card is inserted.
X
Call up the Routes menu (Y page 357).
X Select Presets Presets in the Routes menu by
turning 00790052007Athe COMAND controller and
press 0098to confirm.
The route memory is displayed.
Off-road and off-map Important safety notes
G
WARNING
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver's sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their
appropriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consideration
by the COMAND system. Route guidance to a destination that is not
on a digitized road
Example: route guidance to an off-road destination
0043
Off-road destination
0044 Off-road route section (blue dashes)
0087 Current vehicle position (the tip of the
triangle indicates the vehicle’s direction
of travel)
0085 Off-road (if available)
COMAND can guide you to destinations
which are within the area of the digital map,
but which are not themselves recorded on the
map.
These destinations are known as off-road
destinations, which you can enter using the
map, for example. In these cases, COMAND
guides you for as long as possible with
navigation announcements and displays on
roads known to the system.
If the vehicle reaches an area which is not part
of the digital map, the display appears as a
split-screen view. On the right, an arrow
appears that points to off-road
destination 0043. You will hear the
announcement: "Please follow the arrow on
the display". As the vehicle approaches the
destination, the Area of destination
Area of destination
reached reached message appears.
Route guidance from an off-road location
to a destination
If the vehicle position is within the area
covered by the digital map, but the map does
not contain any information about that
location, the vehicle is in an off-road location. Navigation
359COMAND Z

X
To make a call: select°in the character
bar and press 0098to confirm.
or
X Press the 0061button on COMAND or on
the multifunction steering wheel.
Redialing
X Call up the telephone basic menu
(Y page 391).
X Select °in the character bar and press
0098 to confirm.
or
X If the telephone basic menu is displayed,
press the 0061button on COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X To select a call: turn00790052007A the COMAND
controller.
X To connect the call: press0098the
COMAND controller.
Using the call list or COMAND phone book
X Open a call list and select an entry
(Y page 400).
or
X Call up the COMAND phone book and
select an entry (Y page 397).
X To make a call: press0098the COMAND
controller or the 0061button.
Making a call via speed dial
The speed dial list contains stored entries
from the phone book ( Ypage 402).
Option 1:
X Hold down one of the number keys for
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing. Option 2:
X
Call up the telephone basic menu
(Y page 391).
X Select Call Lists Call Lists by sliding00520064and
turning 00790052007Athe COMAND controller and
press 0098to confirm.
A menu appears.
X Select Speed Dial Preset List
Speed Dial Preset List by
turning 00790052007Athe COMAND controller and
press 0098to confirm.
The speed dial list appears.
X Select preset and press 0098to confirm.
The telephone basic menu displays the
selected entry. This initiates dialing.
Functions available during a call Overview
Telephone operation with a single call
0043
Person you are calling
0044 Symbol for active telephone connection
0087 To switch hands-free microphone on/off
(Ypage 394)
0085 To send DTMF tones (not possible with all
mobile phones) (Y page 394)
0083 To end a call
Available functions:
R accept a waiting call (Y page 394)
R make a second call (Y page 395)
R call waiting (Y page 395)
Availability depends on the network (only
possible in the GSM network) and on the
Bluetooth ®
mobile phone. Telephone
393COMAND Z

i
Save
Save is shown in grey if the selected list
entry has already been saved.
X Select Add Phone No.
Add Phone No. and press0098to
confirm.
X Select a category for the number, e.g.
Home
Home, and press 0098to confirm.
X Select a category for the phone, e.g.
Mobile Mobile, and press 0098to confirm.
X Select Save
Save.
The search menu for address book entries
appears.
X Search for the desired entry (Y page 397).
X Press 0098when you have finished searching.
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
You will see a message to this effect.
If five numbers are stored for the entry you
are searching for, a prompt will appear
asking whether you wish to overwrite one
of the existing numbers.
X Select Yes YesorNo
No and press 0098to confirm.
If you select Yes
Yes, a selection list with the
five existing numbers is displayed.
If you select No
No, the process will be
canceled.
X Select the number to be overwritten in the
list by turning 00790052007Athe COMAND controller
and press 0098to confirm.
COMAND overwrites the selected number
with the new data.
Deleting call lists If you are using a Bluetooth
®
phone that does
not support the PBAP Bluetooth ®
profile, the
call lists are generated and managed by
COMAND. You can delete these call lists in
COMAND.
If you download call lists from a Bluetooth ®
phone that supports the PBAP Bluetooth ®
profile, you cannot delete them from
COMAND. X
Select Call Lists
Call Lists in the telephone basic
menu by turning 00790052007Athe COMAND
controller and press 0098to confirm.
X Select Delete Call Lists
Delete Call Lists and press0098
to confirm.
A prompt appears asking whether you wish
to delete all call lists.
X Select Yes YesorNo
No and press 0098to confirm.
If you select Yes
Yes, the call lists are deleted.
If you select No
No, the process will be
canceled.
i If you delete these call lists from the
mobile phone (see the separate mobile
phone operating instructions), COMAND
updates the call list display the next time it
connects. Using the speed dial list
Storing an entry You can assign ten speed dial presets (0 – 9)
to the speed dial list. There are two options
available for this purpose.
Option 1:
X
Search for a phone book entry in the phone
book (Y page 397).
X If an entry has several phone numbers,
select the desired number by turning
00790052007A the COMAND controller.
X Select the list symbol to the right of the
entry by sliding 00520096the COMAND
controller and press 0098to confirm.
A menu appears.
X Select Speed Dial
Speed Dial by turning00790052007Athe
COMAND controller and press 0098to
confirm.
A menu appears. 402
TelephoneCOMAND