2014 MERCEDES-BENZ GL warning

[x] Cancel search: warning

Page 108 of 462

MERCEDES-BENZ GL 2014  Owners Manual Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-s

Page 109 of 462

MERCEDES-BENZ GL 2014  Owners Manual XCheck whether you have fastened seat
belt�Dproperly (Ypage 57).
The seat belt should:
Rfit snugly across your body
Rbe routed across the middle of your
shoulder
Rbe routed in your pelvic area across

Page 112 of 462

MERCEDES-BENZ GL 2014  Owners Manual Rear seat head restraints
Adjusting the rear seat head restraint
height
XOnce the head restraint is fully lowered,
press release catch�C.
XTo raise:pull the head restraint up to the
desired position.

Page 113 of 462

MERCEDES-BENZ GL 2014  Owners Manual GWARNING
Children could become trapped if they adjust
the seats, particularly when unattended.
There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehic

Page 115 of 462

MERCEDES-BENZ GL 2014  Owners Manual Folding down the seats in the second
row manually
Important safety notes
GWARNING
If the seat and backrest are not engaged, they
can fold forwards, e.g. in the event of sudden
braking or an accident.

Page 116 of 462

MERCEDES-BENZ GL 2014  Owners Manual XPull release handle�Dagain in the direction
of the arrow to the pressure point and hold
it in this position.
or
XPull on release loop�Cin the direction of
the arrow and hold in this position.
XLift u

Page 117 of 462

MERCEDES-BENZ GL 2014  Owners Manual belt can no longer offer the intended level
of protection and could even cause injuries.
RA child restraint system would no longer be
anchored or positioned correctly and would
not be able to perform

Page 121 of 462

MERCEDES-BENZ GL 2014  Owners Manual Problems with the seat ventilation
ProblemPossible causes/consequences and�P�PSolutions
The seat ventilation has
switched off
prematurely or cannot
be switched on.
The on-board voltage is too low beca