X
Press Wthe COMAND controller.
The system display is shown as full screen
(without system menu).
X Slide XVY or turn cVdthe COMAND
controller until the desired display appears.
X To exit the full-screen display: pressW
the COMAND controller.
The system menu appears. Displays in the multifunction display
and in the COMAND display Example: information in the COMAND operating
mode display
1 Internal combustion engine
2 Electric motor
3 High-voltage battery
4 High-voltage battery condition of charge
5 Energy flow
i You can view the curren toperating mode
in the multifunction display and the
COMAND display. The active hybrid
components are highlighted. Operating mode in the multifunction
display and in the COMAND display
Automatic engine switch-off Example: COMAND display The engine and electric motor are switched
off. The arrows indicating energy flow are not
shown.
i
The condition of charge for the high-
voltage battery is shown only when the
SmartKey is in position 2in the ignition.
Engine running while vehicle is
stationary Example: COMAND display
The engine is running while the vehicle is
stationary. The high-voltage battery is not
being charged. The engine is highlighted in
the multifunction display and the COMAND
display.
Charging while vehicle is stationary
Example: COMAND display
The engine powers the electric motor. The
electric motor operates as a generator. The
high-voltage battery is being charged.
Driving using the engine
Example: COMAND display Menus and submenus
29On-board computer and displays
