2014 MERCEDES-BENZ CLS fold seats

Operator'sManual
Vehicle equipment...........................22
Outside temperature display...........220
Overhead control panel......................37
Override feature
Rearside windows...........................65
P
Paintcode number............................372
Paintwork (cleaning instructions)...313
Panicalarm..........................................40
Parking...............................................167
Important safety notes..................167
Parking brake................................169
Position of exteriormirror, front-
passenger side............................... 111
Rearview camera..........................199
see PARKTRONIC
Parking aid
Active Parking Assist.....................196
see Exterior mirrors
see PARKTRONIC
Parking brake
Display message............................240
Notes/function..............................169
Warning lamp ................................. 272
Parking lamps
Switching on/off...........................118
PARKTRONIC
Deactivating/activating.................195
Driving system...............................193
Function/notes.............................193
Important safety notes..................193
Problem (malfunction)...................196
Range of the sensors.....................194
Warning display.............................195
PASSAIRBAG OFF
seePASSENGER AIRBAGOFF
PASSENGER AIR BAG OFF
Indicatorlamp .................................. 47
Problems(malfunction) .................. 244
Plastic trim (cleaning instructions).316
Power washers..................................312
Power windows
see Side windows
PRE-SAFE®(anticipatory occupant
protection)
Display message............................241
Operation .........................................54
PRE-SAFE®Brake
Activating/deactivating.................228
Display message............................241
Function/notes ................................ 72
Warning lamp ................................. 275
Productinformation............................21
Program selector button..................159
Protection of the environment
General notes..................................21
Pulling away (automatic
transmission)..................................... 150
Q
Qualifiedspecialistworkshop...........26
R
RACESTART (AMG vehicles).............188
RACETIMER(on-board computer)....235
Radar sensor system
Activating/deactivating.................232
Display message............................252
Radio
Selectingastation.........................225
see separate operating instructions
Radio-based vehiclecomponents
Declarationofconformity................25
Readinglamp.....................................123
Rear compartment
Setting the airvents......................143
Rear fog lamp
Display message............................246
Rear seat (foldingthe backrest
forwards/back).................................281
Rear seats
Display message............................261
Rear viewcamera
Cleaning instructions.....................315
Function/notes.............................199
Switching on/off...........................200
Rear-viewmirror
Dipping (automatic).......................111
Rear window blind............................287
14Index

Door controlpanel
FunctionPage
\n
Stores settingsfor the seat,
exterior mirrorsand
steering wheel112
Adjusts the seats
electrically100
$Unlocks/locks
the vehicle83
!Opens the door82

Adjusts and folds the
exterior mirrors in/out
electrically109
FunctionPage
%\nOpens/closes the
side windows89
Activates/
deactivates the override
feature for the side
windows in the rear
compartment65
 Opens/closes the
trunk lid86
38Doorcontrol panel
At ag lance

Special seat belt retractor
GWARNING
If the seat belt is released while driving, the
child restraint system will no longer be
secured properly. The special seat belt
retractor is disabled and the inertia real draws
inaportion of the seat belt. The seat belt
cannot be immediately refastened. There is
an increased risk of injury, possibly even fatal.
Stop the vehicle immediately, paying
attention to road and traffic conditions.
Reactivate the special seat belt retractor and
secure the child restraint system properly.
All seat belts except the driver's seat belt are
equipped withaspecial seat belt retractor.
When activated, the special seat belt
retractor ensures that the seat belt will not
slacken once the child restraint system has
been secured.
Installingachild restraint system:
XAlways comply with the manufacturer's
installation instructions.
XPull the seat belt smoothly from the seat
belt retractor.
XEngage the seat belt tongue in the belt
buckle.
Activating the special seat belt retractor:
XPull the seat belt out fully and let the seat
belt retractor retract it again.
While the seat belt is retracting, you should
heararatcheting sound. The special seat
belt retractor is activated.
XPush down on the child restraint system to
take up any slack.
Removingachild restraint system/
deactivating the special seat belt retractor:
XAlways comply with the manufacturer's
installation instructions.
XPress the seat belt release button and
guide the belt tongue to the belt outlet.
The special seat belt retractor is
deactivated.
LATCH-type (ISOFIX) child seat anchors
in the rear
GWARNING
LATCH-type (ISOFIX) child restraint systems
do not offer sufficient protective effect for
children whose weight is greater than 48 lbs
(22 kg). The child could, for example, not be
restrained correctly in the event of an
accident. This poses an increased risk of
injury or even fatal injury.
If the child weighs more than 48 lbs (22 kg),
also secure the LATCH-type (ISOFIX) child
restraint system with the vehicle seat belt.
Also secure the child restraint system with the
Top Tether belt, if available.
When installingachild restraint system, be
sure to observe the manufacturer's
installation instructions and the instructions
for correctuse of the child restraint system.
Securing ring
When installing the LATCH-type (ISOFIX) child
restraint system, fold protective capsof
securing ringsinwards.
XInstall the LATCH-type (ISOFIX) child seat
securing system. Comply with the
manufacturer's instructions when
installing.
The LATCH-type (ISOFIX) system is a
standardized securing system for specially
designed child restraint systems on the rear
seats. Securing rings for two LATCH-type
(ISOFIX) child restraint systems are installed
on the left and right of the rear seats.
Children in the vehicle63
Safety
Z

Secure child restraint systems withouta
LATCH-type (ISOFIX) child seat securing
system using the seat belts in the vehicle.
When installing child restraint systems, you
must observe the manufacturer's installation
instructions.
Top Tether
Top Tether anchorages
GWARNING
Alwayslock the rear seat backrests in their
upright positionwhen the rear seats are
occupied by passengers. Lock the rear seat
backrests in their upright position before
installing the Top Tether straps or when the
cargo compartmentisnot in use. Make sure
that rear seat backrests are secured properly
by pushing and pulling on the seat backrests.
If the seat backrest is not locked properly, the
seat backrest could fold forward. The child
restraint system is no longer supported
properly or held in position and can no longer
fulfill its function. This could cause serious or
even fatal injuries.
Top Tether provides an additional connection
betweenachild restraint system, secured
withaLATCH-type (ISOFIX) child seat mount,
and the rear seat. This helps reduce the risk
of injury even further.
The Top Tether anchorage points are located
in the rear compartmentbehind the head
restraints.
XMove head restraintupwards.
XFold up coverof Top Tether anchorage
$.
XRoute Top Tether beltunder head
restraintbetween the two head restraint
bars.
XHook Top Tether hook!intoTop Tether
anchorage$.
XMake sure that Top Tether beltis not
twisted.
XFold down coverof Top Tether
anchorage$.
XSlide down head restraintuntil it
engages (Ypage 101).
Make sure that you do not interfere with the
correct routingofTop Tether belt.
XInstall the LATCH-type (ISOFIX) child
restraint system with Top Tether.Comply
with the manufacturer's installation
instructions when doing so. Make sure that
Top Tether beltis tight.
Child-proof locks
Important safety notes
GWARNING
If children are left unsupervised in the vehicle,
they could:
Ropen the doors, thus endangering other
people or road users.
Rget out and disrupt traffic.
Roperate the vehicle's equipment.
64Children in the vehicle
Safety

properly secured in an appropriately sized
child restraint system or booster seat
recommended for the size and weight of the
child. For additional information,see the
"Children in the vehicle" section.
Achild's risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle and/
or the child is not properly secured in the child
restraint.
!To avoid damage to the seats and the seat
heating, observe the following information:
Rkeep liquids from spilling on the seats. If
liquidisspilled on the seats, dry them as
soon as possible.
Rif the seat covers are damp or wet, do not
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
Rclean the seat covers as recommended;
see "Interior care".
Rdo not transport heavy loads on the
seats. Do not place sharp objectsonthe
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
Rwhen the seat heating is in operation, do
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
!Make sure that there are no objectsinthe
footwell or behind the seats when resetting
the seats. There isarisk that the seats
and/or the objectscould be damaged.
iThe head restraintsinthe front seats are
installed with the NECK-PRO system
(Ypage 53). For this reason, it is not
possible to remove the head restraints
from the front seats.
For more information,contactaqualified
specialist workshop.
iFurther related subjects:
Adjusting the seats
Head restraint height
Seat cushion angle
$Seat height
!Seat fore-and-aft adjustment
Backrest angle
iIf PRE-SAFE®is triggered, the front-
passenger seat will be moved toabetter
position if it was previously in an
unfavorable position.
iYou can store the seat settings using the
memory function (Ypage 112).
iVehicles with the through-loading
feature: if you fold downarear seat
backrest, the respective front seat is
moved forwards slightly in order to avoid
contact.
Adjusting the head restraints
Important safety notes
GWARNING
You could lose control of your vehicle if you
do the following while driving:
Radjust the driver's seat, head restraint,
steering wheel or mirrors
Rfasten the seat belt
There isarisk of an accident.
Adjust the driver's seat, head restraint,
steering wheel and mirror and fasten your
seat belt before startingthe engine.
100Seats
Seats, steering whee la nd mirrors

The indicator lamp goes out again after
some time. You can adjust the selected
mirror using adjustmentbutton$as long
as the indicator lamp is lit.
XPress adjustmentbutton$up, down,or
to theleft or right until you have adjusted
theexteriormirror to thecorrectposition.
You should haveagood overview of traffic
conditions.
The convex exteriormirrors providealarger
field of vision.
After the engine has been started, the
exterior mirrors are automatically heatedif
the rear window defroster is switched on and
the outside temperature is low. Heating takes
amaximum of 10 minutes.
iThe exterior mirrors can also be heated
manually by switching on the rear window
defroster.
Folding theexterior mirrorsinorout
electrically
XTurn the SmartKey to position1or2in the
ignition (Ypage 147).
XBriefly press button.
Bothexterior mirrors fold in or out.
iMake sure that the exterior mirrors are
always folded out fully while driving. They
could otherwise vibrate.
iIf you are drivingfaster than 30 mp/h
(47 km/h), you can no longer fold in the
exterior mirrors.
Setting theexterior mirrors
If the battery has been disconnected or
completely discharged, the exterior mirrors
must be reset.The exterior mirrors will
otherwise not fold in when you select the
"Fold in mirrors when locking" function in the
on-board computer (Ypage 233)
XTurn the SmartKey to position1in the
ignition lock (Ypage 147).
XBriefly press button.
Folding the exterior mirrors in or out
automatically
If the "Fold in mirrors when locking" function
is activated in the on-board computer
(Ypage 233):
Rthe exterior mirrors fold in automatically as
soon as you lock the vehicle from the
outside.
Rthe exterior mirrors fold out again
automatically as soon as you unlock the
vehicle and then open the driver's or front-
passenger door.
iIf the exterior mirrors have been folded in
manually,they do not fold out.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
XVehicles without electrically folding
exterior mirrors:move the exterior mirror
into the correct position manually.
XVehicles with electrically folding
exterior mirrors:press and hold mirror-
folding buttonuntil you hearaclick and
then the mirrors engage in position
(Ypage 110).
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
(Ypage 109).
110Mirrors
Seats, steering whee la nd mirrors

AMG vehiclesXBriefly press trim.
iThe stowagetray can be removed.
Stowage compartmentunderthe
armrest
XTo open:pull handleup.
The armrestfolds out.
iDependingonthe vehicle's equipment, a
12Vsocket,aUSB socket,and an AUX IN
connection or Media Interface are installed
in the stowage compartment.AMedia
Interface isauniversal interface for mobile
audio equipment, e.g. for an iPod®or MP3
player (see the separate COMAND
OperatingInstructions).
Stowage compartment under the front
seats
GWARNING
If you exceed the maximum load for the
stowage compartment,the cover may not be
able to restrain the items. Itemsmay be
thrown out of the stowage compartment and
hit vehicle occupants. There isarisk of injury,
particularly in the event of sudden brakingor
asudden change in direction.
Never exceedthe maximum permissible load
for the stowage compartment.Stowand
secure heavy objects in the trunk.
The maximum permissible load of the
stowage compartment is 3.3 lbs (1.5 kg).
XTo open:pull handleup and fold
coverforwards.
iOn vehicles withafire extinguisher, the
fire extinguisher is located in the stowage
compartment under the driver's seat.
Stowage compartmentsinthe rear
center console
XTo open:slide coversandin the
direction of the arrow.
iThere isa12Vpower socket in the front
stowage compartment.
280Stowage areas
Stowage and features

Stowage compartment in the rear seat
armrest
!Do not sit or lean your bodyweight on the
armrests when they are folded out as you
could damage them.
!Close the cover of the stowage
compartmentbefore folding the rear seat
armrest back intothe seat backrest.
XTo open:fold down seat armrest.
XFold coverof the armrest upwards.
Storage pockets
GWARNING
Storage bags are intended for storing light-
weight items only.
Heavy objects, objects with sharp edges or
fragile objects may not be transported in the
storage bag. In an accident, during hard
braking, or sudden maneuvers,they could be
thrown around inside the vehicle and cause
injurytovehicle occupants.
Storage bags cannot protecttransported
goods in the event of an accident.
The stowage pockets are on the back of the
driver's and front-passenger'sseats.
Stowage nets
Stowage netsare located in the front-
passenger footwell and on the right-hand side
of the trunk.
Observe the loading guidelines (Ypage 278)
and the safety notes regarding stowage
spaces (Ypage 278).
Rear bench seat through-loading
feature
Important safetynotes
GWARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold
forwards, e.g. when brakingsuddenly or in the
event of an accident.
RThe vehicle occupantwould thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest.The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
RObjectsorloads in the trunk cannot be
restrained by the seat backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
Observe the loading guidelines (Ypage 278).
The left-hand and right-hand rear seat
backrests can be folded down separately to
increase the trunk capacity.
Folding the seat backrest forward
iVehicles with memory function: when you
fold one or both parts of the rear seat
Stowage areas281
Stowage and features
Z