2014 MERCEDES-BENZ CLS warning lights

Problems with PARKTRONIC
ProblemPossible causes/consequences andSolutions
Only the red segments
in the PARKTRONIC
warning displaysare lit.
You also hearawarning
tone for approximately
two seconds.
PARKTRONIC is then
deactivated and the
indicator lamp on the
PARKTRONIC button
lights up.
PARKTRONIC has malfunctioned and has switched off.
XIf problems persist, have PARKTRONIC checked ataqualified
specialist workshop.
Only the red segments
in the PARKTRONIC
warning displaysare lit.
PARKTRONIC is then
deactivated.
The PARKTRONIC sensors are dirty or there is interference.
XCleanthe PARKTRONIC sensors (Ypage 315).
XSwitch the ignition back on.
The problem may be caused by an external source of radio or
ultrasound waves.
XSee if PARKTRONIC functions inadifferent location.
Active Parking Assist
General notes
Active Parking Assist is an electronic parking
aid with ultrasound. It measures the road on
both sides of the vehicle.Aparking symbol
indicatesasuitable parking space. Active
steering interventioncan assistyou during
parking. You may also use PARKTRONIC
(Ypage 193).
Important safety notes
Active Parking Assist is merely an aid. It is not
areplacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering, parking
and exitingaparking space. Make sure that
no persons, animals or objectsare in the
maneuvering range.
When PARKTRONIC is switched off, Active
Parking Assist is also unavailable.
GWARNING
The vehicle swings out when parking and in
doing so could cross into the opposite lane.
This could result inacollision with another
road user. There isarisk of an accident.
Pay attention to other road users when
parking. Stop the vehicle if necessary or
cancel the Active Parking Assist parking
procedure.
!If unavoidable, you should drive over
obstacles such as curbs slowly and not at
asharp angle. Otherwise, you may damage
the wheels or tires.
Active Parking Assist may possibly indicate
parking spaces which are not suitable for
parking, for example:
Rwhere parking or stopping is prohibited
Rin front of driveways or entrances and exits
Ron unsuitable surfaces
196Driving systems
Driving and parking

ThePark Assist Active Select R
ObserveSurroundingsmessage appears in
the multifunction display.
Further transmission shifts may be
necessary.
As soon as the parking procedure is
complete, thePark Assist Finished
message appears in the multifunction
display.PARKTRONICcontinuestobe
available.
XManeuver if necessary.
XAlways observe the warning messages
displayed by PARKTRONIC (Ypage 195).
Parking tips:
RThe way your vehicle is positioned in the
parking space after parking is dependent
on various factors. These include the
position and shape of the vehicles parked
in front and behind it and the conditions of
the location. It may be the case that Active
Parking Assist guides you too far into a
parking space, or not far enough into it. In
some cases, it may also lead you across or
ontothe curb. If necessary, you should
cancel the parking procedure with Active
Parking Assist.
RYou can also engage forward gear
prematurely. The vehicle redirects and
does not drive as far into the parking space.
Shouldagear be changed too early, the
parking procedure will be canceled. A
sensible parking position can no longer be
achieved from this position.
CancelingActive Parking Assist
You can cancel Active Parking Assist at any
time.
XStop the movementofthe multifunction
steeringwheel or steer yourself.
Active Parking Assist will be canceled at
once. ThePark Assist Canceled
message appears in the multifunction
display.
or
XPress the PARKTRONIC button on the
center console (Ypage 195).
PARKTRONIC is switched off and Active
Parking Assist is immediately canceled.
ThePark Assist Canceledmessage
appears in the multifunction display.
Active Parking Assist is canceled
automatically if:
Rthe transmission is shifted too early.
Rparking using Active Parking Assist is no
longer possible.
Ryou are driving faster than6mph
(10 km/h).
Rawheel spins, ESP®intervenes or fails. The
warning lamp lights up in the
instrument cluster.
Awarning tone sounds. The parking symbol
disappears and themultifunction display
shows theParkAssist Canceled
message.
If ActiveParking Assist is canceled, you must
steer again yourself.
Rearview camera
Important safety notes
The rear view camera is only an aid. It is not
areplacementfor your attentiontoyour
immediatesurroundings. You are always
responsible for safe maneuvering and
parking.When maneuvering or parking, make
sure that there are no persons, animals or
objectsinthe area in which you are
maneuvering.
Under the following circumstances, the rear
view camera will not function, or will function
inalimited manner:
Rif the trunk lid/tailgate is open
Rin heavy rain, snow or fog
Rat night or in very dark places
Driving systems199
Driving and parking
Z

This device has been approved by the FCC
asa"Vehicular RadarSystem". The radar
sensor is intended foruse in an automotive
radar system only. Removing, tampering
with, or altering the device will void any
warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
Monitoring range of the sensors
In particular, the detection of obstacles can
be impaired if:
Rdirt on the sensors or anything else
covering the sensors
Rpoor visibility, e.g. due to fog, heavy rain,
snow or spray
Rnarrow vehicles, e.g. motorcycles or
bicycles
Rthe road has very wide lanes
Rthe road has narrow lanes
Ryou are not driving in the middle of the lane
Rthere are barriers or similarlane borders
Vehiclesinthemonitoringrangeare then not
indicated.
BlindSpotAssist monitors the area up to
10 ft (3 m) behind your vehicle and directly
next to your vehicle, as shown in the diagram.
If the lanes are narrow, vehicles driving in the
lane beyond the lane next to your vehicle may
be indicated, especially if the vehicles are not
driving in the middle of their lane. This may
be the case if there are vehicles driving at the
inner edge of their lanes.
Due to the nature of the system:
Rwarnings may be issued in error when
driving close to crash barriers or similar
solid lane borders.
Rthe warning is canceled when driving for an
extended period next to long vehicles, such
as trucks.
The two radar sensors for Blind Spot Assist
are integrated into the sides of the rear
bumper. Make sure that the bumper is free of
dirt, ice or slush in the vicinity of the sensors.
The sensors must not be covered, for
example by cycle racks or overhanging loads.
Followingasevere impact or in the event of
damage to the bumpers, have the function of
the sensors checked ataqualified specialist
workshop. Blind Spot Assist may otherwise
not work properly.
Indicator and warning display
Yellowindicator lamp/red warning lamp
Active Blind Spot Assist is not active at
speeds below approximately 20 mph
(30 km/h). Vehicles in the monitoring range
are then not indicated.
When Blind Spot Assist is activated, indicator
lampin the exterior mirrors lights up
yellow at speeds of up to 20 mph(30km/h).
At speeds above 20 mph (30 km/h) the
208Driving systems
Driving and parking

indicator lamp goes out and BlindSpot Assist
is operational.
Ifavehicle is detected within the monitoring
rangeofBlindSpot Assist at speeds above
20 mph (30 km/h), warninglampon the
correspondingside lightsupred. This warning
is always emitted whenavehicle enters the
blind spot monitoring rangefrom behind or
from the side.When you overtakeavehicle,
the warning only occurs if the difference in
speed is less than7mph (12km/h).
The yellow indicator lamp goes out if reverse
gear is engaged. In this event,Blind Spot
Assist is no longer active.
The brightness of the indicator/warning
lamps is adjusted automatically according to
the ambient light.
Collision warning
Ifavehicle is detected in the monitoring range
of Blind Spot Assist and you switchonthe
correspondingturn signal,adouble warning
tonesounds. Red warning lampflashes. If
the turn signal remains on, vehicles detected
are indicated by the flashing of red warning
lamp.There are no further warning tones.
Switching on Blind Spot Assist
XMake sure that Blind Spot Assist
(Ypage 228) is activated in the on-board
computer.
XTurn the SmartKey to position2in the
ignition lock.
Warning lampsin the exterior mirrors
light up red for approximately
1.5 seconds and then turn yellow.
Lane Keeping Assist
Important safety notes
GWARNING
Lane Keeping Assist may not always clearly
recognizelane markings.
In this case, Lane Keeping Assist may:
Rgive an unnecessary warning
Rnot giveawarning
There isarisk of an accident.
Always pay particular attention to the traffic
situation and stay in lane, in particular if
warned by Lane Keeping Assist.
GWARNING
The Lane Keeping Assist warning does not
return the vehicle to the original lane. There
isarisk of an accident.
You should always steer, brake or accelerate
yourself, in particular if warned by Lane
Keeping Assist.
If you fail to adapt your driving style, Lane
Keeping Assist can neither reduce the risk of
an accident nor override the laws of physics.
Lane Keeping Assist cannot take into account
the road, traffic and weather conditions. Lane
Keeping Assist is merely an aid. You are
responsible for the distance to the vehicle in
front,for vehicle speed, for braking in good
time and for staying in your lane.
The Lane Keeping Assist does not keep the
vehicle in the lane.
The system may be impaired or may not
function if:
Rthere is poor visibility, e.g. due to
insufficient illumination of the road, or due
to snow, rain, fog or spray
Rthere is glare, e.g. from oncomingtraffic,
the sun or reflections (e.g. when the road
surface is wet)
Rthe windshield is dirty, fogged up, damaged
or covered, for instancebyasticker, in the
vicinity of the camera
Rthere are no, several or unclear lane
markings foralane, e.g. in areas with road
construction work
Rthe lane markings are worn away,dark or
covered up, e.g. by dirt or snow
Driving systems209
Driving and parking
Z

specialist workshop. Active Blind Spot Assist
may otherwise no longer work properly.
Monitoring area
GWARNING
Active Blind Spot Assist does not detect all
traffic situations and road users. There is a
risk of an accident.
Always make sure that there is sufficient
distance on the side for other traffic or
obstacles.
Active Blind Spot Assist monitors the area up
to 10 ft (3.0 m) behind your vehicle and
directly next to your vehicle, as shown in the
diagram.
The detection of obstacles can be impaired in
the case of:
Rdirt on the sensors or anything else
covering the sensors
Rpoor visibility, e.g. due to rain, snow or
spray
Vehicles in the monitoring range are then not
indicated or indicated withadelay.
Active Blind Spot Assist may not detect
narrow vehicles, such as motorcycles or
bicycles, or may only detect them too late.
If the lanes are narrow, vehicles driving in the
lane beyond the lane next to your vehicle may
be indicated, especially if the vehicles are not
driving in the middle of their lane. This may
be the case if there are vehicles at the edge
of their lane.
Due to the nature of the system:
Rwarnings may be issued in error when
driving close to crash barriers or similar
solid lane borders.
Rthe warning is canceled when driving for an
extended period next to long vehicles, such
as trucks.
Indicator and warning display
Yellowindicator lamp/red warning lamp
Active Blind Spot Assist is not active at
speeds below approximately 20 mph
(30 km/h). Vehicles in the monitoring range
are then not indicated.
When active Blind Spot Assist is activated,
indicator lampin the exterior mirrors lights
up yellow at speeds of up to
20 mph(30 km/h). At speeds above 20 mph
(30 km/h), the indicator lamp goes out and
active Blind Spot Assist is operational.
Ifavehicle is detected within the monitoring
range of Blind Spot Assist at speeds above
20 mph (30 km/h), warning lampon the
corresponding side lights up red. This warning
is always given whenavehicle enters the
blind spot monitoring range from behind or
from the side. When you overtakeavehicle,
the warning only occurs if the difference in
speed is less than7mph (12km/h).
The yellow indicator lamp goes out if reverse
gear is engaged. In this event,Active Blind
Spot Assist is no longer active.
212Driving systems
Driving and parking

GWARNING
If you deactivate ESP®,ESP®no longer
stabilizes the vehicle. There is an increased
risk of skidding and an accident.
Only deactivate ESP®in the situations
described in the following.
It may be best to deactivate ESP®in the
following situations:
Rwhen using snow chains
Rin deep snow
Ron sand or gravel
Activating/deactivating ESP®on AMG
vehicles (Ypage70).
For further information about ESP®,see
(Ypage68).
XStart the engine.
XPress the\norbutton on the
steering wheeltoselect theDriveAssist
menu.
XPress theorbutton to select
ESP.
XPress thebutton.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
ESP®is deactivated if the warning lamp
in the instrument cluster lights up
continuously when the engine is running.
If thewarning lamp and the
warning lamp are lit continuously,ESP®is not
available due toamalfunction.
Observe the information on warning lamps
(Ypage269).
Observe the information on display messages
(Ypage238).
Activating/deactivating PRE-SAFE®
Brake
PRE-SAFE®Brake is only available in vehicles
with DISTRONIC PLUS.
XPress\noron the steering wheel
to select theDriveAssistmenu.
XPress theorbutton to select
PRE-SAFEBrake.
XPress thebutton.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
When PRE-SAFE®Brake is deactivated, the
assistance graphic showsthe
symbol in
the multifunction display.
For more information on PRE-SAFE®Brake,
see (Ypage72).
Activating/deactivating ATTENTION
ASSIST
XPress\noron the steering wheel
to select theDriveAssistmenu.
XPressorto selectAttention
Assist.
XPress thebutton.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
When ATTENTION ASSIST is deactivated, the

symbol and OFF appear in the
multifunction display in the assistance
display when the engine is running.
For further information about ATTENTION
ASSIST, see (Ypage203).
Activating/deactivating Blind Spot
Assist
XPress\noron the steering wheel
to select theDriveAssistmenu.
XPress theorbutton to select
Blind Spot Asst.
228Menus and submenus
On-board computer and displays

Display messagesPossible causes/consequences andSolutions


Inoperative See
Operator'sManual
EBD(electronic brakeforcedistribution), ABS, ESP®,BAS,PRE-
SAFE®,theHOLD function and hill start assist are unavailable due
toamalfunction.
BASPLUSand PRE-SAFE®Brake may also havefailed.
In addition,the, andwarninglampslightupin
the instrument cluster andawarning tonesounds.
GWARNING
The brake system continues to function normally, but without the
functionslisted above. The frontand rearwheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XDrive on carefully.
XVisitaqualified specialist workshop immediately.
(USA
only)
(Canada
only)
Release Parking
Brake
You are driving with the parking brake applied.Awarning tone also
sounds.
XRelease theparking brake.
(USA
only)
(Canada
only)
Check Brake Fluid
Level
Thereisnot enough brake fluid in the brake fluid reservoir.
In addition, the(USA only)/
(Canada only) warning
lamp lights up in the instrument cluster andawarning tone
sounds.
GWARNING
The braking effect maybeimpaired.
There isariskofanaccident.
XPull overand stop the vehiclesafelyassoonaspossible,paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away(Ypage 167).
XConsultaqualified specialist workshop.
XDo not add brake fluid. This does not correct the malfunction.
240Display messages
On-board computer and displays

Display messagesPossible causes/consequences andSolutions

SRS Malfunction
ServiceRequired
There isamalfunction in theSRS (Supplemental Restraint
System). Thewarninglamp also lights up in theinstrument
cluster.
GWARNING
The air bags or Emergency Tensioning Devices may either be
triggered unintentionally or, in theevent of an accident, may not
be triggered.
There is an increasedriskofinjury.
XVisitaqualified specialist workshop.
For further information about SRS, see (Ypage 41).

Front Left
Malfunction
ServiceRequired
orFront Right
Malfunction
ServiceRequired
SRS has malfunctioned at the frontonthe left or right.The
warning lamp also lights up in the instrument cluster.
GWARNING
The air bags or EmergencyTensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
XVisitaqualified specialist workshop.

Rear Left
Malfunction
ServiceRequired
orRear Right
Malfunction
ServiceRequired
GWARNING
The air bags or EmergencyTensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
SRS has malfunctioned at the rear on the left or right.The
warning lamp also lights up in the instrument cluster.
XVisitaqualified specialist workshop.

Left Side Curtain
AirbagMalfunction
ServiceRequired
orRight Side
CurtainAirbag
malfunction
ServiceRequired
There isamalfunction in the left-hand or right-handwindow
curtain air bag.
Thewarning lamp also lights up in the instrument cluster.
GWARNING
The left or right window curtain air bag may either be triggered
unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
XVisitaqualified specialist workshop.
242Display messages
On-boar dc omputer and displays