XPress the button.
The currentselection is displayed.
XTo activate/deactivate:press the
button again.
If theBlind Spot Assist Sensors
DeactivatedorAct. Blind Spot Asst.
Sensors Deactivatedmessage appears,
the radar sensor system is deactivated.
XSwitchonthe radar sensor system
(Ypage 232).
For further information about Blind Spot
Assist,see (Ypage 207).
For further information about Active Blind
Spot Assist,see (Ypage 211).
Activating/deactivating Lane Keeping
Assist
XPress \nor on the steering wheel
to select theDriveAssistmenu.
XPress the or button to select
Lane Keep. Asst.
XPress the button.
The currentselection is displayed.
XPress to confirm.
XPress the or button to setOff,
StandardorAdaptive.
XPress the button to save the setting.
For further information about Lane Keeping
Assist,see (Ypage 209).
For further information about Active Lane
Keeping Assist,see (Ypage 214).
Maintenance menu
In theServ.menu, you have the following
options:
RCalling up display messages in message
memory (Ypage 237)
RRestarting the tire pressure loss warning
system (Ypage 342)
RCheckingthe tire pressure electronically
(Ypage 342)
RCalling up the servicedue date
(Ypage 310)
Settings menu
Introduction
In theSett.menu, you have the following
options:
RChanging the instrument cluster settings
(Ypage 229)
RChanging the light settings (Ypage 230)
RChanging the vehicle settings
(Ypage 232)
RChanging the convenience settings
(Ypage 233)
RRestoringthe factory settings
(Ypage 234)
Instrument cluster
Selecting the unit of measurement for
distance
TheDisplay Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
Menus and submenus229
On-boar dc omputer and displays
Z
You can determinewhether the multifunction
display shows some messages in miles or
kilometers.
XPress the \nor button on the
steeringwheel to selecttheSett.menu.
XPress the or button to select the
Inst. Clustersubmenu.
XPress to confirm.
XPress the or button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting:kmor
miles.
XPress the button to save the setting.
The selected unit of measurement for
distance applies to:
Rthe digital speedometer in theTripmenu
Rodometer and the trip odometer
Rtrip computer
Rcurrent consumption and the range
Rthe navigation instructions in theNavi
menu
Rcruise control
RDISTRONIC PLUS
RASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
displaypermanently shows your speed or the
outside temperature.
XPress the \nor button on the
steering wheel to select theSett.menu.
XPress the or button to select the
Inst. Clustersubmenu.
XPress to confirm.
XPress the or button to select the
Permanent Display:function.
You will see the selected settingOutside
TemperatureorSpeedometer [km/h]
(USA)/Speedometer [mph](Canada).
XPress the button to save the setting.
iThe speed is shown in km/h (USA)/mph
(Canada).
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrumentcluster,inthe
displays and the controls in the vehicle
interior can be adjusted using the
Brightness Display/Switches:function.
XPress the \nor button on the
steeringwheel to selecttheSett.menu.
XPress the or button to select the
Lightssubmenu.
XPress to confirm.
XPress the or button to select the
Brightness Display/Switches:
function.
You will see the selected setting.
XPress to confirm.
XPress the or button to adjust the
brightness to any level fromLevel 1to
Level 5(bright).
XPress the or button to save the
setting.
If the light switch is set to \r, or
,the brightness is dependent upon
the brightness of the ambient light.
iThe light sensor in the instrumentcluster
automatically controls the brightnessof
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching thedaytime running lamps on/
off
iThis function is not available in Canada.
XPress the \nor button on the
steeringwheel to selecttheSett.menu.
XPress the or button to select the
Lightssubmenu.
XPress to confirm.
230Menus and submenus
On-board computer and displays
