2014 MERCEDES-BENZ CLA engine

[x] Cancel search: engine

Page 79 of 354

MERCEDES-BENZ CLA 2014  Owners Manual ProblemPossible causes/consequences and�Solutions
The engine cannot be
started using the
SmartKey.
The on-board voltage is too low.
XSwitch off non-essential consumers, e.g. seat heating or interior

Page 82 of 354

MERCEDES-BENZ CLA 2014  Owners Manual XTurn the mechanical key clockwise as far
as it will go to position�.
XTurn the mechanical key back and remove
it.
XMake sure that the doors and the trunk lid
are locked.
XInsert the mechanical key i

Page 83 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Closing
XPull down the trunk lid using handle�.
XLet the trunk lid drop into the lock.
XIf necessary, lockthe vehicle with the
�\nbutton on the SmartKey.
Opening automatically from outside
Important

Page 85 of 354

MERCEDES-BENZ CLA 2014  Owners Manual take the SmartKey with you and lock the
vehicle. Never leave children unsupervised in
the vehicle.
Side window reversing feature
The side windows are equipped with an
automatic reversing feature. If a

Page 89 of 354

MERCEDES-BENZ CLA 2014  Owners Manual XTurn the SmartKey to position1or2in the
ignition lock.
XMake sure that the roller sunblinds are
open.
XPress or pull the�switch in the
corresponding direction.
iIf you press the�switch beyond the
p

Page 92 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-s

Page 93 of 354

MERCEDES-BENZ CLA 2014  Owners Manual The seat belt should:
Rfit snugly across your body
Rbe routed across the middle of your
shoulder
Rbe routed in your pelvic area across the
hip joints
XBefore starting off, adjust the rear-view
mirror

Page 95 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Adjusting the seats electrically
�Head restraintheight2
�Seat cushion angle
�"Seat height
�!Seat fore-and-aft adjustment
�Backrest angle
iYou can store the seat settings using the
memory function (