2014 MERCEDES-BENZ C-Class COUPE remote control

PASSENGER AIR BAG OFF
Problem (malfunction) .....................49
Problems (malfunction) .................. 213
PASSENGE RAIR BAG OFF indicator
lamp ...................................................... 45
Plastic trim (cleaning instructions) .278
Power washers .................................. 275
Power windows see Side windows
PRE-SAFE ®
(anticipatory occupant
protection) Display message ............................ 209
Operation ........................................ .50
PRE-SAFE ®
Brake
Activating/deactivating .................198
Display message ............................ 210
Function/notes ................................ 67
Warning lamp ................................. 243
Program selector button ..................140
Protection of the environment General notes .................................. 20
Pulling away
Automatic transmission .................134 Q
Qualifie dspecialis tworkshop ...........24 R
RACE START (AMG vehicles) .............167
RACETIMER (on-board computer) ....204
Radar sensor system Activating/deactivating .................202
Display message ............................ 221
Radio
Selecting astation ......................... 194
see separate operating instructions
Radio-wave reception/
transmission in the vehicle
Declaratio nofconformity ................ 24
Reading lamp ..................................... 111
Rear compartment Setting the airv ents...................... 128
Rear fog lamp
Display message ............................ 215
Switching on/off ........................... 108Rear seat (folding the backrest
forwards/back)
................................. 248
Rear view camera Cleaning instructions .....................277
Function/notes ............................. 175
Rear-view mirror
Anti-glar e(manual) ........................ 100
Dipping (automatic) .......................102
Rear window defroster
Problem (malfunction) ...................127
Switching on/off ........................... 126
Refrigerant (air-conditioning
system)
Important safety notes ..................339
Refueling
Fuel gauge ....................................... 29
Important safety notes ..................145
Notes for AMG vehicles .................335
Refueling proces s.......................... 146
see Fuel
Releasing the parking lock
manually (automatic transmission) 145
Remote control Garage door opener .......................263
Programming (garage door opener) 263
Replacing bulbs
Important safety notes ..................112
Overview of bul btypes .................. 113
Reporting safety defects ....................25
Reserve (fuel tank) see Fuel
Reserve fuel
Display message ............................ 220
Warning lamp ................................. 240
see Fuel
Restraint system
see SRS (Supplemental Restraint
System)
Reverse gear
Engaging (automatic transmission) 138
Reversing feature
Panorama sliding sunroo f................ 87
Roller sunblind ................................. 88
Side windows ................................... 84
Trunk lid .......................................... .80
Roadside Assistance (breakdown) ....22 14
Index

Locating
astolen vehicl e............... 261
MB info call button ........................258
Remote vehicle locking ..................260
Roadside Assistance button ..........258
Search &Send ............................... 260
Self-test ......................................... 256
Speed alert .................................... 262
System .......................................... 256
Triggering the vehicle alarm ........... 263
Vehicle remote malfunction
diagnosi s....................................... 261
Vehicle remote unlocking ..............260
Tele Aid
General notes ................................ 255
Telephone
Accepting acall............................. 196
Display message ............................ 230
Menu (on-board computer) ............195
Number from the phone book ....... .196
Redialing ........................................ 196
Rejecting/ending acall................. 196
Temperature
Coolant .......................................... 188
Coolant (on-board computer) ......... 203
Engine oil (on-board computer) ...... 203
Outside temperature ..................... .189
Setting (climate control) ................124
Theft deterrent systems
ATA (Anti-Theft Alarm system) .........69
Immobilize r...................................... 69
Through-loading feature ...................248
Time see separate operating instructions
Timing (RACETIMER) .........................204
Tire pressure Calling up (on-board computer) .....304
Checking manually ........................303
Display message ............................ 226
Important safety notes ..................304
Maximum ....................................... 302
Notes ............................................. 301
Pressure loss warning ....................303
Recommended ............................... 300
Tire pressure loss warning
system
General notes ................................ 303
Important safety notes ..................303
Restarting ...................................... 304Tire pressure monitoring system
Checking the tire pressure
electronically ................................. 306
Function/notes ............................. 304
General notes ................................ 304
Important safety notes ..................305
Restarting ...................................... 307
Warning lamp ................................. 244
Warning message .......................... 307
Tires
Aspect ratio (definition) .................319
Average weight of the vehicle
occupants (definition) ....................317
Bar (definition) ............................... 317
Changing awheel .......................... 320
Characteristics .............................. 317
Checking ........................................ 297
Definition of terms .........................317
Directio nofrotation ...................... 320
Display message ............................ 226
Distributio nofthe vehicle
occupants (definition) ....................319
DOT, Tire Identification Number
(TIN) .............................................. .316
DOT (Department of
Transportation) (definition) ............317
GAWR (Gross Axle Weight Rating)
(definition) ..................................... 318
GVW (Gross Vehicle Weight)
(definition) ..................................... 318
GVWR (Gross Vehicle Weight
Rating) (definition) .........................318
Important safety notes ..................296
Increased vehicle weight due to
optional equipment (definition) ......317
Kilopascal (kPa) (definition) ...........318
Labeling (overview )........................ 313
Load bearing index (definition) ......319
Load index ..................................... 316
Load index (definition) ...................318
M+S tires ....................................... 298
Maximum loaded vehicle weight
(definition) ..................................... 318
Maximum load on a tire (definition) 318
Maximum permissible tire
pressure (definition) ....................... 318
Maximum tire loa d......................... 311
Maximum tire load (definition) .......318 Index
17

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Read the information on qualified
specialist workshops: (Y page 24).SmartKey
Important safety notes
G
WARNING
If children are left unsupervised in the vehicle,
they could:
R open the doors, thus endangering other
people or road users.
R get out and disrupt traffic.
R operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R release the parking brake.
R shifting the automatic transmission out of
park position P
R Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children. G
WARNING
If persons, particularly children are subjected
to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle. G
WARNING
If you attach heavy or large objects to the
SmartKey, the SmartKey could be
unintentionally turned in the ignition lock .This
could cause the engine to be switched off.
There is a risk of an accident.
Do not attach any heavy or large objects to
the SmartKey. Remove any bulky key rings
before inserting the SmartKey into the
ignition lock.
! Keep the SmartKey away from strong
magnetic fields. Otherwise, the remote
control function could be affected.
Strong magnetic fields can occur in the
vicinity of powerful electrical installations.
R Do not keep the KEYLESS-GO key:
-with electronic devices, e.g. a mobile
phone or another SmartKey
- with metallic objects, e.g. coins or metal
foil
- inside metallic objects e.g. a metal case
This can affect the functionality of the
SmartKey. SmartKey functions
The SmartKey centrally locks/unlocks:
R the doors
R the trunk lid
R the fuel filler flap 72
SmartKeyOpening and closing

Problems with the SmartKey
Problem Possible causes/consequences and
0001 Solutions
You cannot lock or
unlock the vehicle
using the SmartKey. The SmartKey battery is discharged or nearly discharged.
X
Try again to lock/unlock the vehicle using the remote control
function of the SmartKey. Point the tip of the SmartKey at the
driver's door handle from close range and press the 000Bor
000A button.
If this does not work:
X Check the SmartKey battery (Y page 75) and replace it if
necessary (Y page 75).
X Lock (Y page 79) or unlock (Y page 79) the vehicle using
the mechanical key. The SmartKey is faulty.
X
Lock (Y page 79) or unlock (Y page 79) the vehicle using
the mechanical key.
X Have the SmartKey checked at a qualified specialist workshop. You can no longer lock
or unlock the vehicle
using KEYLESS-GO. There is interference from a powerful source of radio waves.
X
Lock/unlock the vehicle using the remote control function of
the SmartKey. Point the tip of the SmartKey at the driver's door
handle from close range and press the 000B/000A button. There is a malfunction with KEYLESS-GO.
X
Lock/unlock the vehicle using the remote control function of
the SmartKey. Point the tip of the SmartKey at the driver's door
handle from close range and press the 000B/000A button.
X Have KEYLESS-GO checked at a qualified specialist workshop.
If this does not work:
X Check the SmartKey battery (Y page 75) and replace it if
necessary (Y page 75).
X Lock (Y page 79) or unlock (Y page 79) the vehicle using
the mechanical key. You have lost a
SmartKey. X
Have the SmartKey deactivated at a qualified specialist
workshop.
X Report the loss immediately to the vehicle insurers.
X If necessary, have the locks changed as well. You have lost the
mechanical key. X
Report the loss immediately to the vehicle insurers.
X If necessary, have the locks changed as well. 76
SmartKeyOpening and closing

Integrated garage door opener in the rear-view
mirror
Garage door remote control 001Fis not part of
the integrated garage door opener.
X The first time before programming, clear
the integrated garage door opener memory
(Y page 266).
X Turn the SmartKey to position 2in the
ignition lock.
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
After a short time, indicator lamp 0002lights
up yellow.
i Indicator lamp 0002lights up yellow as soon
as button 0003,0022or0021 is programmed for
the first time. If the selected button has
already been programmed, indicator
lamp 0002will only lightu p yellow after ten
seconds have elapsed.
X Release button 0003,0022or0021. Indicator
lamp 0002flashes yellow.
X Point garage door remote control 001F
towards buttons 0003to0021 on the rear-view
mirror at a distance of 2 to 8 inches (5 to
20 cm).
i The required distance between remote
control 001Fand the integrated garage door
opener depends on the garage door drive
system. Several attempts might be
necessary. You should test every position
for at least 25 seconds before trying
another position. X
Press and hold button 0020on remot econtrol
001F until indicator lamp 0002lights up green.
If indicator lamp 0002lights up green or
flashes, then programming has been
successful.
X Release button 0020on remote control 001Ffor
the garage door drive system.
X If indicator lamp 0002lights up red: repeat
the programming procedure for the
corresponding button on the rear-view
mirror. When doing so, vary the distance
between remote control 001Fand the rear-
view mirror.
i If the indicator lamp flashes green after
successful programming, the garage door
system is using a rolling code. After
programming, you must synchronize the
garage door opener integrated in the rear-
view mirror with the receiver of the garage
door system.
Synchronizing the rolling code
Observe the "Important safety notes"
(Y page 263).
Your vehicle must be within reach of the
garage door or exterior gate drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X Turn the SmartKey to position 2in the
ignition lock.
X Press the program button of the door or
gate drive (see the door or gate drive
operating instructions, e.g. under
"programming of additional remote
controls").
i Usually, you now have 30seconds to
initiate the next step.
X Press previously programmed button 0003,
0022 or0021 of the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete. 264
FeaturesStowage and features

Notes on programming the remote
control
Canadia nradio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
Therefore, these signals may no tlast long
enough for the integrated garage door
opener. The signal is no trecognized during
programming. Comparable with Canadian
law, some U.S.g arage door openers also
feature a "break".
Proceed as follows:
R if you live in Canada
R if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
Afte rashort time, indicator lamp 0002lights
up yellow.
X Release the button.
Indicator lamp 0002flashes yellow.
X Press button 0020of garage door remote
control 001Ffor two seconds, then release it
for two seconds.
X Press button 0020againf or two seconds.
X Repeat this sequence on button 0020of
remote control 001Funtil indicator lamp 0002
lights up green.
If indicator lamp 0002turns red, repeat the
process.
X Continue with the other programming
steps (see above).
Problems when programming
If you are experiencing problems
programming the integrated garage door
opener on the rear-view mirror, take note of
the following instructions:
R Check the transmitter frequency of garage
door drive remote control 001F.This can
usually be found on the back of the remote
control. The integrated garage door opener is
compatible with devices that have units
which operate in the frequency range of
280to 433MHz.
R Replace the batteries in garage door
remote control 001F.This increases the
likelihood that garage door remote control
001F will transmit a stronga nd precise signal
to the integrated garage door opene rinthe
rear-view mirror.
R When programming, hold remote control
001F at varying distances and angles from the
button that you are programming. Try
various angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R If another remote control for the same
garage door drive is available, repeat the
same programming steps with this remote
control. Before performing these steps,
make sure that new batteries have been
installed in garage door drive remote
control 001F.
R Note that some remote controls only
transmit for a limited amount of time (the
indicator lamp on the remote control goes
out). Press button 0020on remote control
001F again before transmission ends.
R Align the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X
Turn the SmartKey to position 2in the
ignition lock.
X Press button 0003,0022or0021 which you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp 0002lights up green. Features
265Stowage and features Z