2014 MAZDA MODEL 6 belt

5
Folding Rear Seatbacks Down
Returning rear seats to
upright position
1 Raise seatbacks until they lock into position.
2 Pul l on the top of the seatbacks from inside
the vehicle to make sure they are locked.
3 Che ck that all seat belts are routed properly for passenger use.
MEMORY SE AT SWI TCH (if eq uipped)
Seats
To Program the Driv er’s Seat Memory Position
1 Turn the ignition switch off.
2 Adjust seat to desired position using the slide/tilt and recline switches.
3 Push and hold the memory seat SET button until a beep is heard.
4 Within 5 seconds:
• To p rogram a memory seat button, push and hold memory button
1 or 2 until a beep sound is heard.
• To program a key, push and hold the key unlock button until a beep
sound is heard (two registered keys can be programmed).
NOTE: Left rear seat release is shown .
Using remote handle:
1 Che ck that rear seats are clear
of objects.
2 Ope n the trunk and pull the
left and/or right side remote
handle lever(s).
3 Ope n a rear door and fold the
rear seat forward.

8
CLOCK ( P. 2 6 )
NAVIGATION/AU DIO
( WIT H 5. 8” LC D)
(PP. 27-28, 31-32)
CLIMATE CONTROL ( P P. 2 3 - 2 4 )SE AT
WARM ERS
www.MazdaUSA.com
PASSENGER AIR BAG
O FF INDI CAT OR1
HAZARD
WARNING
AU DIO ( WITHO UT
5.8 ” LC D)
( P P. 2 5 - 2 8 )
ACCESSORY
S OCKET
1 This indicator light illuminates to remind you that the front passenger’s front/side airbags
and seat belt pretensioner will not deploy during a collision. The reason for this is that the
weight in the seat is less than approximately 66 lbs. Always wear your seat belt and secure children in the rear
seats in appropriate child restraints. See the Owner’s Manual for important information on this safety feature.
NOTE:
Indicator light turns of f when conditions have been met for necessar y airbag deployment. See
Owner’s Manual for further information.
P USH
B UTT ON
S TA RT
( P. 3 - 4 )
WIPER /
WASH ER
( P. 1 2 )

9
SHIFT POSITION
IN DI CAT OR LIGHT S
PEE DOME TER
Instrument Cluster
TPMS NOTE: Low ambient temperature and/or high altitude causes tire pressures to drop
and may turn the TPMS warning light on. If the warning light comes on, check the tire pressure
and fll the tires as soon as possible, preferably before moving the vehicle and warming up the
tires. Initialize system (p. 16). Tire pressure should be checked when the tires are cold.
T ACHOMETERAMB IENT
T EMPER AT U R E
TYPE A & B CLUSTER GLOSSARY WARNING AN D IN DICA TOR LIGHTS
NOTE:
See Owner’s Manual for more details and explanations.
Type A cluster is
shown. Ty pe B
clus ter is similar,
but with warning
lights in different
locations.
The instrument cluster has a dimmer function that can be
cancelled to make the illumination brighter during the day
when the headlights are on. If the illumination
is too dim during the day, push the knob,
or if the illumination does not dim when
turning on the headlights at night,
push the knob. When dimmed,
rotate the knob to adjust the
brightness of the illumination.
Lane
Depar ture Warning
System On ( AMBER)/
Lan e Detected ( GREEN ) ( p . 17 )
AFS
OFF

Ada
ptive Front Lighting System
(AFS) OFF ( p. 14)

Tr a
ction Control System (TCS)/
D yna mic Stability Control ( DSC) On: TCS/DSC malfunction
Flashing: TCS/DSC operating
BSM OFF

B
SM OFF ( Blin d Spot
Monitoring) (pp. 25-26)
OFF
D
yna mic Stability Control
(D SC) O ff Indicator Light
SPORT Mode On ( p. 19)

Lights On (Exterior) ( p . 11)
High Beam Control On ( p. 13)

Headlight High B eams On

Air Bag/Front Seat Belt
Pretensioner System
Malfunction
Chec
k Engine Light

Sea
t B elt Un buckled/
Malfunction

Tu r
n Signals/Hazard
Warning Indicator Lights

Tire
Pressure Monitoring System
(TPMS) Warning Light ( p. 18) On/Warning Beep: Low tire pressure in one
or m ore tires. Flashing: TPMS Malfunction

Cru
ise Main Indicator Light
On ( AMB ER)/C ruise Set
Indicator Light On ( GREEN )

Mazda Radar Cruise Control
War ning Light On ( AMBER)
Set Indicator ( GREEN )
(pp. 15-16)

ABS (Antilock B rake
System) Malfunction

Shi
ft Position Indicator Light

Secu
rity Indicator Light