2014 LEXUS LX570 display

1922-2. Instrument cluster
LX570_OM_OM60L21U_(U) Eco Driving Indicator Light customization
Eco Driving Indicator Light can be activated or deactivated.
While the odometer is being dis-
played, press and hold the odome-
ter/trip meter display change
button to display the Eco Driving
Indicator Light customization
screen.
Press the odometer/trip meter displa y change button to set Eco
Driving Indicator Light to on or off.
Press and hold the odometer/tri p meter display ch ange button to
complete the setting.
Instrument panel light control
The brightness of the instrument panel light can be adjusted.
Darker
BrighterSTEP 1
STEP 2
STEP 3

1942-2. Instrument cluster
LX570_OM_OM60L21U_(U) Indicators and warning lights The indicator and warning lights on the instrument cluster and center
panel inform the driver of the status of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays all indica-
tors and warning lights illuminated.
Instrument cluster
The units used on the speedometer and some indicators may differ depend-
ing on the target region.
Center panel

1982-2. Instrument cluster
LX570_OM_OM60L21U_(U) Multi-information display The multi-information display presents the driver with a variety of driving-
related data including the current outside air temperature.
● Trip information (  P. 200)Displays driving range, fuel consumpt ion and other cruising related infor-
mation.
● Outside temperature display (  P. 200)
● Speedometer (  P. 200)
● Turn-by-turn navigation (  P. 200)
● Front tire angle (  P. 200)
● Tire inflation pressure (  P. 200)
● Intuitive parking assist display (if equipped) (  P. 2 4 9 )Automatically displayed when us ing Intuitive parking assist.
● 4-Wheel AHC display (  P. 318)

1992-2. Instrument cluster
2
When driving
LX570_OM_OM60L21U_(U) ● Dynamic radar cruise control display (if equipped) (  P. 2 3 4 )Automatically displayed when using dynamic radar cruise control.
● Multi-terrain Select display (  P. 3 4 2 )
● Crawl Control display (  P. 335)
● Shift position and shift range (  P. 1 7 9 )Displays the selected shift position or selected shift range.
● Warning messages (  P. 8 3 2 )Automatically displayed when a malfunction occurs in one of the vehicle’s
system.

2002-2. Instrument cluster
LX570_OM_OM60L21U_(U) Switching the display
Display items can be switched by
pressing the “DISP” switch.
Display items
■ Outside temperature display
■ Average fuel consumption and Eco Driving Indicator Zone Display
(  P. 166) Displays the outside temperature • The temperature range that can be displayed
is from -40  F (-40  C) to 122  F (50  C).
• When Crawl control and Multi-terrain Select
is operating, the temperature is displayed on
the top of the multi-information display. Oth-
erwise, it is displayed in the middle of the
multi-information display.
Displays the average fuel consumption since
the function was reset • The function can be reset by pressing the
“DISP” switch for longer than 1 second when
the average fuel consumption is displayed.
• Use the displayed average fuel consumption
as a reference.

2012-2. Instrument cluster
2
When driving
LX570_OM_OM60L21U_(U) ■ Average fuel consumption after refueling
■ Current fuel consumption
■ Driving range
■ Speedometer Displays the average fuel consumption since
the vehicle was last refueled Use the displayed average fuel consumption as a
reference.
Displays the current rate of fuel consumption
Displays the estimated maximum distance that
can be driven with the quantity of fuel remain-
ing • This distance is computed based on your
average fuel consumption. As a result, the
actual distance that can be driven may differ
from that displayed.
• When only a small amount of fuel is added to
the tank, the display may not be updated.
When refueling, turn the “ENGINE START
STOP” switch off. If the vehicle is refueled
without turning the “ENGINE START STOP”
switch off, the display may not be updated.
Displays the vehicle speed. The speed units (MPH or km/h) can be
selected by pressing the “DISP” switch for
longer than 1 second when the speedometer is
displayed.

2022-2. Instrument cluster
LX570_OM_OM60L21U_(U) ■ Average vehicle speed
■ Front tire angle
■ Turn-by-turn navigation setting screen Displays the average vehicle speed since the
engine was started or the function was reset The function can be reset by pressing the “DISP”
switch for longer than 1 second when the aver-
age vehicle speed is displayed.
Displays the direction of the front tires The tire direction is displayed in 3 stages for
both left and right, in accordance with the angle
of the tire.
The turn-by-turn navigati on can be set to on or
off. The function can be activated or deactivated by
pressing the “DISP” switch for longer than 1 sec-
ond when turn-by-turn navigation setting
screen is displayed.

2032-2. Instrument cluster
2
When driving
LX570_OM_OM60L21U_(U) ■ Tire inflation pressure
■ Display off
A blank screen is displayed Displays inflation pressure of each tire. There
is no correlation between the order of the dis-
played values and the tire positions. If the inflation pressure of any tire drops a cer-
tain amount below the tire inflation pressure
value currently memorized in the system, the
displayed values will be highlighted.
It may take a few minutes to display the tire infla-
tion pressure after the “ENGINE START STOP”
switch is turned to IGNITION ON mode. It may
also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been
adjusted.
If the tire pressure warning light is on or flashing,
a message describing the situation will be dis-
played.