2014 Lexus IS250 navigation

141
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
XWithout signpost motorway data
No.Information/Function
Next exit or junction name
Select to hide the motorway guid-
ance screen. To return to the motor-
way guidance screen, select .
Distance from the current position to
the exit or junction
Remaining distance bar to the guid-
ance point
INFORMATION
●
If “Automatic zoom” is set to on, these
screens are not displayed. (→P.1 7 0 )
WHEN APPROACHING
INTERSECTION
When the vehicle approaches an inter-
section, the intersection guidance
screen will be displayed.
No.Information/Function
Next street name
Lane guidance
Select to hide the intersection guid-
ance screen. To return to the inter-
section guidance screen, select
.
Distance to the intersection
Remaining distance bar to the guid-
ance point
INFORMATION
●
If “Automatic zoom” is set to on, this
screen is not displayed. (→P.1 7 0 )
IS_Navi_EE_53C71E.book 141 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

143
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
2. TYPICAL VOICE GUIDANCE PROMPTS
As the vehicle approaches an intersec-
tion, or point, where maneuvering the
vehicle is necessary, the system’s voice
guidance will provide various messages.
CAUTION
●Be sure to obey the traffic regulations and
keep the road condition in mind espe-
cially when you are driving on IPD roads
(roads that are not completely digitized in
our database). The route guidance may
not have the updated information such as
the direction of a one way street.
INFORMATION
●
If a voice guidance command cannot be
heard, select on the map screen to
hear it again.
●To adjust the voice guidance volume:
→P. 8 3
●Voice guidance may be made early or
late.
●If the system cannot determine the cur-
rent position correctly, you may not hear
voice guidance or may not see the mag-
nified intersection on the screen.
IS_Navi_EE_53C71E.book 143 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

145
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
5Select the items to be set.
6Check that the entire route map is dis-
played. (→P.133)
1Display the “Route” screen. (→P.144)
2Select “A d d ”.
3Search for an additional destination in
the same way as a destination search.
(→P.116)
4Select “Add destination here” to insert
the new destination into the route.No.FunctionPage
Select to set search condi-
tions.147
Select to set detours.147
Select to set road prefer-
ences.148
Select to add destinations.145
Select to delete destina-
tions.146
Select to reorder destina-
tions.146
Select to display route
overview.149
ADDING DESTINATIONS
IS_Navi_EE_53C71E.book 145 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

147
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Display the “Route” screen. (→P.144)
2Select “Search condition”.
3Select the desired type and select “OK”.
1Display the “Route” screen. (→P.144)
2Select “Detour”.
3Select the desired detour distance.
SETTING SEARCH
CONDITION
Road conditions of the route to the des-
tination can be set.
DETOUR SETTING
During the route guidance, the route
can be changed to detour around a sec-
tion of the route where a delay is caused
by road repairs, an accident, etc.
No.Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
Select to make the system search for
the route based on the traffic con-
gestion information received from
traffic information. (→P.109)
IS_Navi_EE_53C71E.book 147 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

149
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Display the “Route” screen. (→P.144)
2Select “Route overview”.
3Check that the entire route map is dis-
played.
■TURN LIST
1Select “Turn list”.
2 Check that the turn list is displayed.
ROUTE OVERVIEW
The entire route from the current posi-
tion to the destination can be viewed
during route guidance.
No.FunctionPage
Select to display a list of the
turns required to reach the
destination.149
Select to change the route.144
Select to start guidance.
The turn list on the guidance route can
be viewed.
No.Information
Current position
Distance to the next turn
Turn direction at the intersection
Select to display the map of the se-
lected point.
INFORMATION
●
However, not all road names in the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through 2 or more
towns), the name change will not appear
on the list. The street names will be dis-
played in order from the starting point,
along with the distance to the next turn.
IS_Navi_EE_53C71E.book 149 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

151
4. MY MEMORY
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
5Select the desired items to be set.
1Display the “My memory” screen.
(→P.150)
2Select “Home”.
3Select the desired item.
No.FunctionPage
Select to set home.151
Select to set the memory
points.155
Select to set quick access.153
Select to set areas to avoid.162
Select to set route traces.165
Select to copy from a USB
memory.169
Select to backup to a USB
memory.167
SETTING UP HOME
If a home has been registered, that infor-
mation can be recalled by selecting
“Home” on the “Destination” screen.
(→P.119)
No.FunctionPage
Select to register home.152
Select to edit home.152
Select to delete home.153
IS_Navi_EE_53C71E.book 151 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

153
4. MY MEMORY
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Delete”.
2Select “Yes” when the confirmation
screen appears.
1Display the “My memory” screen.
(→P.150)
2Select “Quick access”.
3Select the desired item.
DELETING HOMESETTING UP QUICK ACCESS
If quick access has been registered, that
information can be recalled by using the
quick access screen buttons on the
“Destination” screen. (→P.120)
No.FunctionPage
Select to register quick ac-
cess.154
Select to edit quick access.154
Select to delete quick ac-
cess.155
IS_Navi_EE_53C71E.book 153 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

155
4. MY MEMORY
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Delete”.
2Select the quick access to be deleted
and select “Delete”.
3Select “Yes” when the confirmation
screen appears.
1Display the “My memory” screen.
(→P.150)
2Select “Memory points”.
3Select the desired item.
DELETING QUICK ACCESSSETTING UP MEMORY
POINTS
Points or areas on the map screen can
be registered.
No.FunctionPage
Select to register memory
points.156
Select to edit memory
points.156
Select to delete memory
points.159
Select to register external
points.382
Select to edit or delete
stored routes.160
IS_Navi_EE_53C71E.book 155 ページ ２０１４年５月２９日　木曜日　午前１１時２２分