2014 Lexus IS250 navigation

96
1. BASIC OPERATION
IS300h/250_Navi_EE
2. MAP SCREEN OPERATION
1Press the “MENU” button on the
Remote Touch.
2Select “Nav”.
3Check that the current position map is
displayed.
zSelect if the navigation menu
screen is displayed.
CURRENT POSITION DISPLAY
zTo correct the current position manually:
→P.1 7 3
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●After 12-volt battery disconnection, or on
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
IS_Navi_EE_53C71E.book 96 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

97
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select or to change the
scale of the map screen.
zThe scale indicator bar appears at the bot-
tom of the screen.
zSelect and hold or to continue
changing the scale of the map screen.
zThe scale of the map screen can also be
changed by selecting the scale bar directly.
: Select to display the entire route, if
the destination has been set.
1Select to display the city map.
zTo return to the normal map display, select
.
MAP SCALE
INFORMATION
●
Press the “” button on the Remote
Touch to zoom in on the map screen and
the “” button to zoom out.
●When the map scale is at the minimum
range, a one way street is displayed by
.
CITY MAP
The city map is available for some major
cities. When a map scale of 50 yd. (50
m) is selected, the map display will
change to the city map in either 2D or
3D.
IS_Navi_EE_53C71E.book 97 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

99
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Menu” on the map screen.
2Select “Map Configuration”.
3Select the desired item.
zDepending on the conditions, certain con-
figuration screen buttons cannot be
selected.
SWITCHING MAP
CONFIGURATIONSNo.FunctionPage
Select to display the single
map screen.100
Select to display the dual
map screen.100
Select to display the com-
pass mode screen.101
Select to display the turn list
screen.142
Select to display the arrow
screen.142
Select to display the motor-
way information screen.140
Select to display the inter-
section guidance screen or
the guidance screen on the
motorway.
141
IS_Navi_EE_53C71E.book 99 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

101
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■COMPASS
zTo scroll over the map, place the cursor
mark in the desired position and then press
and hold the Remote Touch knob. The map
will continue scrolling in that direction until
the knob is released.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the centre of the screen for
looking at a point on the map screen that
is different from the current position.
No.Information/FunctionPage
Cursor mark
Select to register the cursor
location as area to avoid.102
Select to return to the cur-
rent position. 
Select to register as a mem-
ory point. To change the
icon, name, etc.: →P.156

Select to set as a destina-
tion.131
Distance from the current
position to the cursor mark
IS_Navi_EE_53C71E.book 101 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

103
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Select one of the 8 directional arrows to
move the cursor to the desired point.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The exact target location can be adjust-
ed in small increments by selecting one
of the 8 directional arrows.
IS_Navi_EE_53C71E.book 103 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

105
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s”.
2Select the desired POI categories and
select “OK”.
“List all categories”: Select to display all
POI categories. To add more POI catego-
ries, select “More”.
■DISPLAYING THE LOCAL POI
LIST
1Select “List nearest POI’s”.
2Select the desired POI.
“On this route”: Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
3Check that the selected POI is dis-
played on the map screen. (→P.101)
POIs that are within 20 miles (30 km) of
the current position will be listed from
among the selected categories.
IS_Navi_EE_53C71E.book 105 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

107
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1 Place the cursor over an icon.
2Select “Info”.
XPOI informationXMemory point information
XDestination information
XTraffic information
XParking information
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is dis-
played on the upper part of the screen. If
“Info” appears on the right side of the
name bar, the detailed information can
be displayed.
IS_Navi_EE_53C71E.book 107 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

109
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-TMC
or TPEG (Transport Protocol Experts Group)
information. Depending on the country or ar-
ea, receiving RDS-TMC and TPEG informa-
tion may not be possible.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic prediction in-
formation and parking lot information
can be viewed.
zThe following 3 methods are available to
receive the above information:
• R D S -T M C * ( R a d i o D a t a S y s t e m -Tr a f f i c
Message Channel) using FM signals
• TPEG*-TEC (Traffic Event Compact),
TPEG*-TFP (Traffic Flow Prediction)
and TPEG*-PKI (Live Parking Informa-
tion) using DAB
• TPEG*-TEC, TPEG*-TEP and TPEG*-
PKI via the internet by using Wi-Fi
® or a
cellular phone
For detailed information about connec-
tion methods for a Wi-Fi® device or cel-
lular phone: →P.50, 69
zReceiving information using a cellular
phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible cel-
lular phone with sufficient network cov-
erage and a SIM card with a contract
that allows access to the internet are
required.
• When using this service, depending on
your telephone subscription, some
related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of mobile
network provider) connection fees will
be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION
IS_Navi_EE_53C71E.book 109 ページ ２０１４年５月２９日　木曜日　午前１１時２２分