Page 562 of 688
5627-2. Steps to take in an emergency
GS350_250_OM_OM30E16E_(EE)
Indicates that engine oil
level is lowCheck the level of engine
oil, and add if necessary.
(If equipped)
Indicates that Lexus park-
ing assist-sensor is dirty
or covered with ice
Clean the sensor.
(If equipped)
Indicates that the radar
sensor is dirty or covered
with ice
Clean the sensor.
(If equipped)
Indicates that the radar
cruise control system is
unable to judge vehicle-
to-vehicle distance
•Turn off the snowmode.
• If the windshield wip- ers are on, turn them
off or set them to a
mode other than
AUTO or high speed
wiper operation.
Wa r n i n g m e s s a g eDetailsCorrection procedure
GS350_250_OM_OM30E16E_(EE).book Page 562 Tuesday, July 8, 201 4 7:11 PM
Page 585 of 688

5857-2. Steps to take in an emergency
7
When trouble arises
GS350_250_OM_OM30E16E_(EE)
CAUTION
■Replacing a flat tire
●Observe the following precautions.
Failure to do so may result in serious injury:
• Do not try to remove the wheel ornament by hand. Take due care in handlingthe ornament to avoid unexpected personal injury.
• Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around the
brakes will be extremely hot. Touching these areas with hands, feet or other
body parts while changing a tire, etc. may result in burns.
●Failure to follow these precautions could cause the wheel nuts to loosen and the
tire to fall off, resulting in death or serious injury.
• Never use oil or grease on the wheel bolts or wheel nuts.Oil and grease may cause the wheel nuts to be excessively tightened, leading
to bolt or disc wheel damage. In a ddition, the oil or grease can cause the
wheel nuts to loosen and the wheel may fall off, causing a serious accident.
Remove any oil or grease from the wheel bolts or wheel nuts.
• Have the wheel nuts tightened with a torque wrench to 103 N•m (10.5 kgf•m, 76 ft•lbf) as soon as possible after changing wheels.
• Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving.
• When installing a tire, only use wheel nuts that have been specifically designed for that wheel.
• If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional.
GS350_250_OM_OM30E16E_(EE).book Page 585 Tuesday, July 8, 201 4 7:11 PM
Page 631 of 688
631
8Vehicle specifications
GS350_250_OM_OM30E16E_(EE)
8-1. SpecificationsMaintenance data (fuel, oil level, etc.) .................. 632
Fuel information..........................648
8-2. Customization Customizable features ............650
8-3. Initialization Item to initialize .............................661
GS350_250_OM_OM30E16E_(EE).book Page 631 Tuesday, July 8, 201 4 7:11 PM
Page 632 of 688
6328-1. Specifications
GS350_250_OM_OM30E16E_(EE)
Maintenance data (fuel, oil level, etc.)
*1: Unladen vehicle
*2:Vehicles with 265/35R19 tires
*3: Vehicles with towing package
*4:AWD models
Dimensions and weights
Overall length 4850mm (190.9 in.)
Overall width 1840 mm (72.4 in.)
Overall height*12WD 1455 mm (57.3 in.)
AWD 1470 mm (57.9 in.)
Wheelbase 2850 mm (112.2 in.)
Tr e a d*1
Front 1575 mm (62.0 in.)
Rear1590 mm (62.6 in.)
1560 mm (61.4 in.)*2
Gross vehicle
mass2WD 2170 kg (4784 lb.)
AWD 2250 kg (4960 lb.)
Maximum
permissible axle
capacityFront 1120 kg (2469 lb.)
Rear 1205 kg (2657 lb.)
Drawbar load*380 kg (176 lb.)
Towing capacity*3With brake1600 kg (3527 lb.)
1000 kg (2205 lb.)*4
Without brake 750 kg (1653 lb.)
GS350_250_OM_OM30E16E_(EE).book Page 632 Tuesday, July 8, 201
4 7:11 PM
Page 635 of 688

635
8
8-1. Specifications
Vehicle specifications
GS350_250_OM_OM30E16E_(EE)
*: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick.
■Engine oil selection (GS250)
XEU area, Nordic countries, Russia, Ukraine, Macedonia, Israel
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Lexus rec-
ommends the use of approved “Toyota Genuine Motor Oil”. Another
motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Lubrication system
GS250GS350
Oil capacity
(Drain and refill reference
*)
With filter6.2 L
(6.6 qt., 5.5 Imp.qt.)6.4 L
(6.8 qt., 5.6 Imp.qt.)
Without filter5.9 L
(6.2 qt., 5.2 Imp.qt.)6.0 L
(6.3 qt., 5.3 Imp.qt.)
GS350_250_OM_OM30E16E_(EE).book Page 635 Tuesday, July 8, 201 4 7:11 PM
Page 636 of 688

6368-1. Specifications
GS350_250_OM_OM30E16E_(EE)
Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Lexus vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
If SAE 0W-20 oil is not available,
SAE 5W-30 oil may be used.
However, it should be replaced
with SAE 0W-20 at the next oil
change.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 0W-20, 5W-20 or
5W-30 engine oil is recom-
mended.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one
with a higher value) may be better suited if the vehicle is operated at
high speeds, or under extreme load conditions.
Temperature range anticipated
before next oil change Preferred
GS350_250_OM_OM30E16E_(EE).book Page 636 Tuesday, July 8, 201
4 7:11 PM
Page 637 of 688
637
8
8-1. Specifications
Vehicle specifications
GS350_250_OM_OM30E16E_(EE)
How to read oil container labels:
Either or both API registered marks are added to some oil containers
to help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN”
means the oil quality designation by
American Petroleum Institute
(API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-Con-
serving” means that the oil has fuel-
saving and environmental protec-
tion capabilities.
ILSAC Certification Mark
The International Lubricant Specifi-
cation Advisory Committee
(ILSAC) Certification Mark is dis-
played on the front of the container.
1
2
GS350_250_OM_OM30E16E_(EE).book Page 637 Tuesday, July 8, 201 4 7:11 PM
Page 638 of 688