Page 217 of 291

IN AN EMERGENCY
215
4
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
MAIN BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍remove the protective cover A - fig. 15;
❍release the bulb holder clip A - fig. 17;
❍disconnect the electrical connector B;
❍remove the bulb C and replace it;
❍fit the new bulb, ensuring that the outline of the met-
al part coincides with the splining on the curve of the
headlight. Then reconnect the electrical connector B
and reattach the bulb holder clip A;
❍refit the protective cover A - fig. 15.
fig. 17
L0E0156m
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: danger of
death! Contact a Lancia Dealership.
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: danger of
death! Contact a Lancia Dealership.
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 215
Page 218 of 291
216
IN AN EMERGENCY
SIDE LIGHTS/DAYTIME RUNNING LIGHTS
The side lights/daytime running lights are LED-type.
Contact a Lancia Dealership to have these lights replaced.
DIRECTION INDICATORS
Front
To replace the bulb, proceed as follows:
❍remove the protective cover C - fig. 15;
❍press down near the bulb holder locking tabs (shown
in fig. 18 by the arrows) and simultaneously pull the
unit;
❍remove the bulb A and replace it;
❍refit the protective cover C.Side
To replace the bulb, proceed as follows:
❍work on the lens cover A - fig. 19 to compress inter-
nal clip B, then pull the unit outwards;
❍turn the bulb holder C anticlockwise, extract the press-
fitted bulb D and replace it;
❍refit the bulb holder C in the lens cover and turn it
clockw
ise;
❍refit the unit making sure that the internal clip B clicks
into place.
fig. 18
L0E0157m
fig. 19
L0E0158m
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 216
Page 219 of 291
IN AN EMERGENCY
217
4
FOG LIGHTS fig. 20
(for versions/markets, where provided)
To replace the front fog light bulbs contact a Lancia Deal-
ership.
REAR LIGHT CLUSTERS
Contact a Lancia Dealership to replace the LED lights in
the rear light clusters.
REVERSING LIGHT fig. 21
Go to a Lancia Dealership to replace the bulb.REAR FOG LIGHT fig. 22
Go to a Lancia Dealership to replace the bulb.
fig. 20
L0E0159m
fig. 22
L0E0161m
fig. 21
L0E0160m
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 217
Page 220 of 291
218
IN AN EMERGENCY
THIRD BRAKE LIGHT fig. 23
Contact a Lancia Dealership to replace the third brake
LED lights.
NUMBER PLATE LIGHTS
To replace the bulb proceed as follows:
❍remove the lens units A - fig. 24 by acting on the points
shown by the arrows;
❍remove the bulb B and replace it.
fig. 23
L0E0162m
fig. 25
L0E0282m
fig. 24
L0E0163m
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 218
Page 221 of 291
IN AN EMERGENCY
219
4
fig. 27
L0E0166m
fig. 26
L0E0165m
REPLACING AN INTERIOR BULBFor the type of bulb and power rating, see the “Bulb types”
paragraph.FRONT ROOF LIGHT
Proceed as follows to replace the bulbs:
❍remove the roof light A - fig. 26 by acting on the points
shown by the arrows;
❍open the protective flap B - fig. 27;
❍replace the bulbs C releasing them from the side con-
tacts and making sure that the new bulbs are correct-
ly secured between the contacts;
❍close flap B - fig. 27 and fasten the roof light A - fig.
26 in its housing, making sure it is locked correctly.
IMPORTANT In some versions, the roof light in fig. 26 is
at the back (electric sun roof version). To replace the rel-
evant bulbs, refer to the procedure described in paragraph
“Rear roof light”
in this chapter.
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 219
Page 222 of 291
220
IN AN EMERGENCY
fig. 28
L0E0167m
fig. 30
L0E0169m
fig. 29
L0E0168m
REAR ROOF LIGHT
Ve r sions without sun roof
Proceed as follows to replace the bulbs:
❍work at the point shown by the arrow and remove roof
light A - fig. 28;
❍replace bulb B - fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
Ve r sions with sun roof
To replace the bulb, proceed as follows:
❍work at the point shown by the arrow and remove roof
light A - fig. 30;❍replace bulb B - fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 220
Page 223 of 291
IN AN EMERGENCY
221
4
fig. 32
L0E0171m
fig. 33
L0E0172m
LUGGAGE COMPARTMENT LIGHT
To replace the bulb, proceed as follows:
❍open the luggage compartment;
❍remove the light A - fig. 32 applying leverage at the
point shown by the arrow;
❍open protection B - fig. 33 and replace the press-fitted
bulb;❍close protection B onto the lens cover;
❍refit the light A by inserting it in its correct position
firstly on one side and then on the other until it clicks
into place.
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 221
Page 224 of 291
222
IN AN EMERGENCY
fig. 34
L0E0173m
fig. 36
L0E0175m
fig. 35
L0E0174m
GLOVE COMPARTMENT LIGHT
To replace the bulb, proceed as follows:
❍open the glove compartment, and remove the light
A - fig. 34;
❍replace bulb B releasing it from the side contacts and
making sure the new bulb is correctly fastened between
the contacts.
COURTESY MIRROR LIGHT
(for versions/markets, where provided)
To replace the bulb, proceed as follows:
❍open the cover A - fig. 35 on the mirror;
❍applying leverage at the points shown by the arrows,
remove light B;❍replace bulb C - fig. 36 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
195-232 Delta GB 1ed 02/09/13 09.35 Pagina 222