2014 KIA Optima Hybrid Owner's Manual

Page 441 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
78
7
If the light (LED) does not operate,
have the vehicle checked by an
authorized Kia dealer.Rear turn signal light
1.Turn off the engine.
2.Open the trunk.
3.Open the service cover. 4.R

Page 442 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 779
Maintenance
Backup light
1.Turn off the engine.
2.Open the trunk.
3.Loosen the retaining screw of thetrunk lid cover and then remove the
cover. 4.Disconnect the cable and then
remove the nuts by t

Page 443 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
80
7
License plate light bulb
replacement
1.Turn off the engine.
2.Open the trunk. 3.Loosen the retaining screw of the
trunk lid cover and then remove the
cover.
4.Take out the light.
5.In

Page 444 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 781
Maintenance
High mounted bulb
1. Turn off the engine.
2. Pull up the seat cushion.
3. Remove the nuts under the seatconnecting each side of the seat.
And take each side seat out. 4.Type A
Fold the

Page 445 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
82
7
5. Take the C-pillar out carefully. If
you pull the C-pillar strongly, it
will be broken.
6. Disconnect the cable attached on the panel. 7. Remove the screws and package
tray.
8. Remo

Page 446 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 783
Maintenance
Interior light bulb replacement
1. Using a flat-blade screwdriver,gently pry the lens from the interi-
or light housing.
2. Remove the bulb by pulling it straight out.
3. Install a new

Page 447 of 474

KIA Optima Hybrid 2014 3.G Owners Manual APPEARANCE CARE
Exterior care
Exterior general caution 
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning
and caution statements that appe

Page 448 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Waxing
Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle
before waxing. Use a good quality
liquid or paste wax, and follow the
manufacturer’s instructions.