2014 KIA Optima Hybrid Owner's Manual

Page 433 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
70
7
Engine room (Sub-relay box)
✽
✽
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
t

Page 434 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 771
Maintenance
Sub relay fuse  panel
Description Fuse RatingProtected Component
EWP 10A ELEC_WATER_PUMP UNIT IG1
BMS 10A BMS UNIT IG1
INVERTER 10A LDC UNIT IG1 , ENGINE INVERTER IG1 C/FAN 60A C/FAN R

Page 435 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
72
7
LIGHT BULBS
Use only the bulbs of the specified
wattage.
If you don’t have necessary tools, the
correct bulbs and the expertise, con-
sult an authorized Kia dealer. In
many cases, i

Page 436 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 773
Maintenance
(1) Headlight (High)
(2) Headlight (Low)
(3) Side marker
(4) Front turn signal light (and Front position light*)
(5) Front position light*
(6) Front fog light*
* : if equippedHeadlight

Page 437 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
74
7
Headlight (bulb type)
1. Turn off the engine.
2. Open the hood.
3. Remove the headlight bulb cover
by turning it counterclockwise.
4. Disconnect the headlight bulb socket-connector.
5

Page 438 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 775
Maintenance
Front side marker/Front turn sig-nal light
Front side marker
1.Turn off the engine.
2.Open the hood
3.Remove the intake folder and screws.
4.Remove the bumper cover and under pad by ro

Page 439 of 474

KIA Optima Hybrid 2014 3.G Owners Manual Maintenance
76
7
9.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into assembly and
turn the socket clockwise.
10. Reinstall the

Page 440 of 474

KIA Optima Hybrid 2014 3.G Owners Manual 777
Maintenance
Front fog light
1.Turn off the engine.
2.Remove the under cover by rotat-ing  the screws.
3.Reach your hand into the back of the front bumper.
4.Disconnect the power connector.
5.Remov