2014 KIA OPTIMA HYBRID ignition

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
18
*IF EQUIPPED
Blind Spot Detection / Lane Change Assist
1st-stage alert: When another vehicle is detected within the
BSD System boundary, a yellow light will illuminate on the
outside rearview mirrors.
2nd-stage alert: When 1st-stage alert is on and a turn signal is
turned on, the 2nd-stage alert will sound.
RCTA (Rear Cross Traffic Alert)
When the vehicle is in Reverse and moves backwards from a
parking position, the sensor detects approaching vehicles on
the left or right side.Blind Spot Detection (BSD) System* The BSD system uses radar sensors to help alert the
driver while changing lanes or while in Reverse moving
backwards.
When the BSD button is pressed ON, the BSD indicator
on the button
A
will illuminate. The outside rearview
mirror warning lights will also illuminate for 3 seconds.
The system will become active when the vehicle is
traveling more than 18 mph and will alert the driver if
another vehicle is detected by the radar sensor.
A


Blind Spot Detection
System Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.www.KuTechVideos.com/tf23/2014
REMINDER:


OThe BSD system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles


OWhen the BSD is ON and the ignition is cycled to OFF then ON again, the BSD system returns to ON


OThe RCTA feature can be turned OFF/ON in User Settings
For more information on the Blind Spot Detection System, please refer to the Owner’s Manual.
QUICK TIPS
DRIVER’S PANEL
( Buttons are located lef t of the Steering Wheel)

19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED REMINDERS:


OAs a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the
ignition switch is turned ON


OIf the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an
authorized Kia dealer and have the system checked


OThe EPB should not be operated while the vehicle is moving, unless there is an emergency situation


OA click or electric brake motor sound may be heard while operating or releasing the EPB, but these
conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake (EPB)*The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when
the shifter is placed in Reverse or Drive .
To release EPB manually, depress the
brake pedal, then press the EPB switch
A,
with the ignition switch in the ON position.
Ensure that the indicator light
is OFF.


O


OWhen leaving your keys with parking lot attendants or valet, make sure to inform them how to
operate the EPB


OIf parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB
application
AB


Electric Parking Break
(EPB)/AUTO HOLD Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014


O
Pull up and hold EPB switch again to increase brake pressure if
parked on a decline or incline.
QUICK TIPSQUICK TIPS
AUTO HOLD*AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be
turned ON/OFF using the AUTO HOLD
switch
B on the driver’s panel. Before
AUTO HOLD will operate, the driver’s
door, engine hood and trunk must be
closed and the driver’s seat belt must
be fastened.
The AUTO HOLD indicator has four
states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B
turned ON, the indicator will illuminate
white. While driving the vehicle (vehicle
is not at a standstill), the AUTO HOLD
indicator will remain white.
Green: Engaged - When coming to
a complete stop by depressing the
brake pedal, the AUTO HOLD indicator
changes from white to green.
OFF (not illuminated): The indicator
will turn OFF when the AUTO HOLD
switch
B is manually turned OFF or
when the EPB is manually turned ON.
Ye l l o w : Malfunction - When the
indicator is illuminated yellow, there
may be a system malfunction. Take
your vehicle to a local Kia dealer.
Refer to pages 3-4 for location of instrument
cluster indicators.
DRIVER’S PANEL

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
22
*IF EQUIPPED
STEERING WHEEL CONTROLSHeated Steering Wheel Button*A Press to turn ON/OFF steering wheel heater, while the
ENGINE START/STOP Button is in the ON position. Steering
wheel heater will turn off automatically after 30 minutes, or
when button is pressed again to deactivate. If ignition is turned OFF, then ON again within 30 minutes
of steering wheel heater being turned on, system will
automatically be set ON again.
QUICK TIPS
To adjust the Steering Wheel, push down the Lock-Release
Lever
B and adjust to desired angle
C and distance
D.
When finished, pull up the Lock-Release Lever
B to lock
Steering Wheel in place.
Tilt/Telescopic Steering Wheel*
D
C
B
A

23
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
Cruise Control* Audio Controls*


OCruise Control is designed to function only above 25 mph


OThe Cruise Control system will not activate until the brake
pedal has been depressed at least once after ignition ON or
engine start
QUICK TIPS
A Audio Mode button: Press to cycle through FM1-2 /AM
/SAT 1-3/CD/USB/Aux/iPod®B
Seek/Preset button


O
Radio Mode: Press to advance through Preset Stations.
Press and hold to auto seek


O
CD/USB/iPod® Mode: Press to move TRACK UP/
DOWN. Press & hold to FF/REWC Vo l u m e b u t to n: Press up/down to raise/lower volume D
Mute Audio button: Press to mute all audio
E
Cruise Control ON/OFF button:
Press to turn the Cruise Control ON/OFFF Resume Cruising Speed switch: Resume or increase
cruising speedF Set Cruising Speed switch: Press to set or decrease
cruising speedG Cruise Control Cancel button: To cancel cruise
control setting, do one of the following:

O

O.!//
O0$!
O.'!
O,! (

O

O.!//
O0$!
O

O100+*
O
G
REMINDER: Your vehicle’s steering wheel buttons may differ from those
in the illustrations. See your Owner’s Manual for more details.
REMINDER: Driving while distracted is dangerous and should be
avoided. Drivers should remain attentive to driving and always exercise
caution when using the steering-wheel-mounted controls while driving.
VOL VOL
MUTEMODE
OK
ECO
CRUISECANCEL
RESSET
D
AB
C
E
F
G
Pressing the Audio Mode button for more than 1 second will
turn Audio Mode ON/OFF.
QUICK TIPS
STEERING WHEEL CONTROLS

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
30
*IF EQUIPPED
Aux/USB/iPod® Port*
& Power Outlets*
The power outlets are
inactive when ignition is in
the OFF position
QUICK TIPS
Press the DONE button* on the navigation screen to ensure changes are saved.
QUICK TIPS
AUX USB

Kia USB Port Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
UVO System Clock Setup*:
Press the eServices button
C to display the menu
screen. Select the Settings icon on screen, then use
the on-screen buttons to navigate through setup.
Navigation System Clock Setup*:
Press the Info/Settings key on the Audio Control Unit. Then press
the on-screen SETUP button and select the clock icon. Then, use
the on-screen buttons to navigate through setup. Standard Audio System Clock Setup*:
Press the H button
A to advance the time by one
hour. Press the M button
B to advance the time by
one minute.
Digital Clock
H
MH
MAB
DISP
FM/AM
SAT
MEDIAeServices
PHONE
SETUP
ENTER TUNE
FILE POWER
PUSH
VOL
®
SEEK
TRACKCATEGORY
C
CENTER PANEL

33
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED


OWith the seat warmer switch in the ON position, the
heating system in the seat turns off or on automatically
depending on the seat temperature


OSystem defaults to the OFF position whenever the
ignition switch is turned ON
QUICK TIPS
Seat Warmers* Press button once for
high setting (2 LEDs
lit). Press again for low
setting (1 LED lit) and
again to turn OFF.
Ye l l o w C o l o r :
Warming
Ye l l o w C o l o r :
WarmingBlue Color:
Ventilated
Ty p e A Shown


Kia Sportmatic® Shifting
Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
Seat Warmers/Ventilated Seats*
P: Park
R: Reverse
N: Neutral
D: Drive
[+]: Sport Mode
Upshift
[–]: Sport Mode
DownshiftAutomatic Gear Shift with
Sportmatic® Shifting*
P
R
N
D


OPress brake pedal and depress release button to move gear shift from
N or R to P or from P to any gear


OSport Mode downshifts are made automatically when the vehicle slows
down. When the vehicle stops, 1st gear is automatically selected
QUICK TIPS
Seat Warmers —
Press top of button once
for high setting (2 LEDs
lit). Press button twice
for low setting (1 LED lit).
Press a third time to
turn OFF.Ventilated Seats —
Press bottom of button
once for high setting
(2 LEDs lit). Press twice
for low setting (1 LED lit).
Press a third time to
turn OFF.
Sport Mode: Move shift lever from D to left gate.
Sport Mode Shifting: Move shift lever up [+] to Upshift or down [-]
to Downshif t.CENTER PANEL

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
34
*IF EQUIPPED
SEATING
21SET
Driver Position Memory System*To store a seating position into memory, first place the
shifter into P (Park) while the ignition switch is on. Then:
1. Adjust the driver’s seat and outside rearview mirror
2. Press the SET button
A on the control panel. System
will beep once
3. Press one of the memory buttons
B within 5 seconds
after pressing the SET button
A. The system will beep twice when memory has been stored
4. “Driver (1 or 2) set is memorized” will appear on the instrument cluster LCD
Power Adjustable Driver’s Seat*Move/Press controls to adjust Seat forward/backward, Seat Cushion, Seatback and Lumbar
SeatbackB
LumbarC
Seat forward/
backwardA
Seat CushionA
B
C
A


Driver Position Memory
System Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
AB

39
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Panoramic Sunroof Operation*The sunroof and sunshade operation is controlled through a
multidirectional switch/lever, and the ignition needs to be in the ON
position to operate the sunroof/sunshade.
Slide the Sunshade and Sunroof:
Auto Open: Slide lever
A backward to the farthest position and release.
Auto Close: Slide the lever
A forward to the farthest position and
release.
Slide the Sunshade:
Auto Open: Slide the lever A backward to the first detent position.
Auto Close: Slide the lever A forward to the farthest position.
Slide the Sunroof (with Sunshade open):
Auto Open: Slide the lever A backward and release.
Auto Close: Slide the lever A forward to the first detent position or pull
the lever downward.
Tilt the Sunroof:
Raise: Push lever
A upward.
Lower: Pull lever
A downward.
Auto Close Sunroof and Sunshade: Slide the lever
A forward to the
farthest position.
SunvisorUse the Sunvisor to shield direct light through
the front or side windows.REMINDER: Sunvisor may not shield all direct light.
REMINDER: The Sunvisor may impair visibility if not
adjusted properly.
To stop the sunroof at any position, slide lever quickly in any direction.
QUICK TIPS
OTHER KEY FEATURES