2014 KIA OPTIMA HYBRID check engine light

7
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
1
023 4 5 6rpm
x 1000
ODO
000456
miles
Active
ON
1
023 4 5 6rpm
x 1000
ODO
000456
miles
Active
ON
Active ECO System*
(ECODynamics)Active ECO helps to improve fuel
efficiency by controlling several
vehicle components. When
activated, it optimizes drivetrain
operations such as engine power
and transmission to help improve
fuel economy.
To turn ON, press the ECO button A. The button light will turn on and
the green ECO indicator light
B in
the instrument cluster will illuminate
(indicating that you are getting
optimal fuel efficiency).The Active
ECO System will remain on even
when the engine is turned off and
restarted.
To turn Active ECO OFF, press the
button
A again.


O
To help improve your fuel efficiency:


O

Drive at a moderate speed, accelerating smoothly and at a moderate rate


OKeep tires inflated to the recommended pressure


OBe sure the wheels are properly aligned
QUICK TIPS
For more information on the Active ECO System, refer to your Owner’s Manual or contact your local dealership.
SET
CANCEL OK
ECO
A
B

Active ECO System
Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
(Eco button located on right
side of Steering Wheel)
INSTRUMENT CLUSTER

9
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED INSTRUMENT CLUSTERTo enter Service
Mode, press the MENU
button
A, scroll to
the Service mode and
press SELECT button
B. Then press the OK
button
C . S y s t e m w i l l
display number of miles
remaining until next
service is due, and type
of service.
Service ModeTo reset the Service Mode system, press and hold
the OK button
C for more than 1 second. To turn
Service In OFF, go to User Settings. Service
To set up the maintenance schedule:


O.!//
O0$!
O

O100+*
O
A and
toggle to Service Interval


O
O.!//
O0$!
O
%
O100+*
O
C
to select the desired maintenance
schedule To enter the User Setting mode on the LCD* cluster, press the
MENU/MODE button
A when the vehicle is at a standstill and with
the ENGINE START/STOP button in the ON position or the engine
running.
You can navigate the selections on the
display by pressing the SELECT button
B,
and then selecting the item by pressing the
OK button
C.
Doors:
- Auto Door Lock*
- Auto Door Unlock*
- Two Press Unlock*
- Horn Feedback*
Lamps:
- One-Touch Turn Lamp*
- Headlamp Delay*
- Welcome Light*
User Settings Mode
P
Service in
0000
mi
00days
P
Service in
Off
P
Service IntervalBack
Off
On2500
mi.
36 month
P
User Settings
Door
Lamp
Convenient
Service
P
Service required
OK
CRUISECANCEL
RESSET
ACB
(located on Steering Wheel)
When service is required, the following screen
will be displayed: Service Required.Convenient:
- Language
- Temperature
- AVG Fuel Economy Reset
- Easy Seat Access*
- Steering Position*
Service:
- Service Interval On/Off
Driver Assist*:
- RCTA (Rear Cross Traffic Alert)

15
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED ENGINE START/STOP Button
2
AB
1To start the engine: 1 Depress the brake pedal2 Press the ENGINE START/STOP button while in Park3 The vehicle is ready to be driven when the READY light illuminates
To turn the vehicle OFF, press the ENGINE START/STOP button.
To use the ENGINE START/STOP button, you must have the Smart Key* fob on your person
or inserted in the fob holder.To use electrical accessories:
ACC position

O

O
O$!*
O%*
O0$!
O
O,+/%0%+*
O
(*+
O(%#$0
)
O*
O3%0$+10
O !,.!//%*#
O0$!
O.'!
O,! (

O,.!//
O0$!
O 
O

%
O100+*
O+*!
O
(+.*#!
O(%#$0
O
A)
ON position


O
O$!*
O(.! 5
O%*
O0$!
O

O,+/%0%+*
O
(+.*#!
O(%#$0
O
A) and without depressing the brake pedal, press the ENGINE START/STOP button again
(green light
B)

O

O
O$!*
O%*
O0$!
O
O,+/%0%+*
O
(*+
O(%#$0
)
O*
O3%0$+10
O !,.!//%*#
O0$!
O.'!
O,! (

O,.!//
O0$!
O 
O

%
O100+*
O03%!
O
(#.!!*
O(%#$0
O
B)
Keeping the vehicle in ACC or ON position too long can discharge the vehicle’s battery.
QUICK TIPS


Optima Hybrid START/
STOP Button and Smart
Key Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODEwww.KuTechVideos.com/tf23/2014
REMINDER: In an emergency situation while the vehicle is in motion, you are able to turn the engine off
and to the ACC position by pressing the ENGINE START/ STOP button for more than 2 seconds or 3 times
successively within 3 seconds.
0 6
3
DRIVER’S PANEL

19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED REMINDERS:


OAs a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the
ignition switch is turned ON


OIf the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an
authorized Kia dealer and have the system checked


OThe EPB should not be operated while the vehicle is moving, unless there is an emergency situation


OA click or electric brake motor sound may be heard while operating or releasing the EPB, but these
conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake (EPB)*The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when
the shifter is placed in Reverse or Drive .
To release EPB manually, depress the
brake pedal, then press the EPB switch
A,
with the ignition switch in the ON position.
Ensure that the indicator light
is OFF.


O


OWhen leaving your keys with parking lot attendants or valet, make sure to inform them how to
operate the EPB


OIf parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB
application
AB


Electric Parking Break
(EPB)/AUTO HOLD Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014


O
Pull up and hold EPB switch again to increase brake pressure if
parked on a decline or incline.
QUICK TIPSQUICK TIPS
AUTO HOLD*AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be
turned ON/OFF using the AUTO HOLD
switch
B on the driver’s panel. Before
AUTO HOLD will operate, the driver’s
door, engine hood and trunk must be
closed and the driver’s seat belt must
be fastened.
The AUTO HOLD indicator has four
states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B
turned ON, the indicator will illuminate
white. While driving the vehicle (vehicle
is not at a standstill), the AUTO HOLD
indicator will remain white.
Green: Engaged - When coming to
a complete stop by depressing the
brake pedal, the AUTO HOLD indicator
changes from white to green.
OFF (not illuminated): The indicator
will turn OFF when the AUTO HOLD
switch
B is manually turned OFF or
when the EPB is manually turned ON.
Ye l l o w : Malfunction - When the
indicator is illuminated yellow, there
may be a system malfunction. Take
your vehicle to a local Kia dealer.
Refer to pages 3-4 for location of instrument
cluster indicators.
DRIVER’S PANEL

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
40
*IF EQUIPPED
Rear-Camera Display*The Rear-Camera Display system is not a safety device.
It is a supplemental system that displays the view
behind the vehicle through the Navigation System* or
UVO* System screen while the vehicle is in Reverse.
The Rear- Camera Display activates when the:
1. ENGINE START/STOP* button is in the ON position
(green light)
2. Gear Shift Lever is in the R (Reverse) position
Warning! Check your surroundings for safety
REMINDER: The Rear-Camera Display is not a substitute for proper and
safe backing-up procedures. Always drive safely and use caution when
backing up. The Rear-Camera Display may not detect every object
behind the vehicle.
REMINDER: UVO System — While camera is active, only the volume
controls on the Audio System can be operated.
REMINDER: Navigation System — While camera is active, only the Audio
System can be operated on the Steering Wheel and Audio Control Unit.
Navigation features are disabled. REMINDER: If the vehicle is moving at speeds over 3 mph, the system
may not activate correctly.
REMINDER: When more than two objects are sensed at the same time,
the closest one will be recognized first.
REMINDER: The Back-Up Warning System is not a substitute for proper
and safe backing-up procedures. Always drive safely and use caution
when backing up. The Back-Up Warning System may not detect every
object behind the vehicle.
The Back-Up Warning System is not a safety device. The
Back-Up Warning System is a supplemental system that
assists the driver by chiming if any object is detected
within the sensing area to the rear and side of the vehicle
when backing up. When the ignition is ON, the system is
activated. Back-Up Warning System (Rear
Parking Assist System)*OTHER KEY FEATURES

41
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CLICK!
Fuel Cap / Malfunction Indicator (Check Engine Light)Tighten for ONE CLICK to prevent Malfunction Indicator

from illuminating.
REMINDER: The Fuel Filler Door Release button is located on the lower part
of the driver’s door panel.
Kia One-Click
Fuel Cap Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
Kia Tire Mobility
Kit Video
QR CODE
www.KuTechVideos.com/tf23/2014
Tire Mobility Kit*The Tire Mobility Kit enables you to quickly and effectively seal certain types of tire damage,
enabling you to drive to the nearest service center. As a result, not all types of tire damage will
require towing.
For operational information, please refer to section 6
of your Owner’s Manual.A Sealant BottleB Compressor
A
B


O


OThe Tire Mobility Kit is a temporary fix and is to be used for one tire only; the tire should be
inspected as soon as possible


OThe kit should only be used for sealing/inflating passenger car tires; do not use for inflating any
other type of tires


OSome damaged tires cannot be sealed completely; do not use the kit if a tire is damaged beyond
repair
QUICK TIPS
REMINDER: After tire is properly
sealed, drive cautiously for no more
than a maximum speed of 50 mph and
a distance of up to 120 miles.
www.KuTechVideos.com/tf23/2014
OTHER KEY FEATURES