2014 JAGUAR XJ air condition

HEATING AND VENTILATION
10
AUDIO AND TOUCH SCREEN
Heating and ventilation
See page 2, items 13, 14, 15 and 38
Primary controls
1.
AU
TO. This is the recommended operating mode.
Automatically adjusts air conditioning, blower speed, air
intake and airflow distribution to maintain the selected
temperature(s). Helps to prevent screen fogging.
2.

T
emperature control. Temperature is displayed on the
Touch screen.
3.

Defrost.
Fastest method to remove frost or heavy
fogging from the windshield.
4.

Recirculation.
Helps prevent fumes from entering.
5.

Blo
wer speed. Rotate to adjust airflow speed
through the v

ents.
6.

Press f
or cooled and dehumidified air.
7.

Heated windshield.
8

.
Heated rear screen.
9

.
Heated seats
. Press to access menu options.
Operating note
Seat heating and ventilating will operate only while
the engine is running. This is to prevent the battery
becoming discharged.
External water deposits
The system removes moisture from the air and
deposits the excess water beneath the vehicle. This is
normal and is no cause for concern. Touch screen controls
Touch Climate on the Home menu.
1.

Settings
. Air quality sensor sensitivity adjustment.
2.
Fr
ont seats. Temperature, ventilation and massage
settings.
3.
Rear c
limate. Displays the Rear climate menu.
4.
Climate Off
. Select to turn on/off.


5

.
Sync
. Synchronises all front and rear settings to
match the driver’s.
6.
Air distr
ibution to the windshield, face and feet.
7.
Indication of selected b
lower speed. Use the rotary
control to adjust.
Rear climate control from the Touch screen
The Touch screen controls for Rear climate are very similar to
those for the front climate. Areas of difference are:
1.

A
uto. This is the recommended operating mode.
2.

T
emperature adjustment. Select red to increase and blue to
decrease temperature.
3.

Rear seats temper
ature and ventilation control.
4.

Rear control panel loc
k. Will disable the Rear climate control
panel. Select again to re-enable.
5.

Indication of the selected b
lower speed. Use the rotary
control to adjust.
Home menu
1. Touch to turn the screen off
2. Extra features menu.
3. Climate menu.
4. Shortcut soft key. Personal shortcuts can be set
to quickly access any available part of the system.
Shortcuts are made in the Setup menu.
5. Setup. Personalize the screen view, system settings,
voice and volume presets.
6. Valet. Select to lock the trunk and glove box when
using attendant parking. When returning to the vehicle,
touch Valet again and follow the on-screen instructions.
7. Audio/Video. Touch to select any of the audio or
video sources, to set personal preferences and store
stations to pre-sets.
8. N a v. On the first navigation screen, touch Agree to
move to the Nav menu or select Language if you need to
select a different navigation language.
9. Destination entry. Touch for direct access to the
Destination entry menu.
Operating note
Always run the engine during
prolonged use of the Touch screen.
Steering wheel audio/video control
See page 2, item 28
1. Short press to move to the next available audio or video source. Long press
to scroll through the sub menu of the selected source.
2. Press to increase volume.
3. Press to decrease volume.
4. Short press to select the next radio preset station or the next CD/MP3 track.
Long press to search up for the next radio station or to advance through the CD/
MP3 tracks.
5. Has the same action as 4 but moves in the opposite direction.
Care point
The Touch screen requires only
light touches. Excess pressure
could result in damage.
JJM189634141.indd 1011/03/2013 12:54:04

NAVIGATION
14
TELEPHONE
Touch screen navigation
On initial activation, make sure
that both the correct country
and search area have been
selected.
For more information, refer to
the Navigation section of the
Owner’s Handbook.
NOTE: To access navigation press either the N AV hard
key or touch the Nav icon on the Home menu.
1.

Use to enter a ne
w destination. Provides a choice of
options when entering a destination.
2.

Displa
ys previous destinations entered. Previous
destinations can be selected as a new destination.
3.


Turns the POI (Point Of Interest) icons on the map
on/off.
4.

When a destination is set, the J
aguar logo in this
position is replaced by a soft key which enables the last
voice instruction to be repeated.
5.

Soft k
ey is highlighted while Voice guidance is
enabled. Touch to turn Voice guidance off.
6.

POI shor
tcuts: Touch an icon to list available POIs
that are close to the vehicle position.
7.

Calculates a detour from the current route
.
8.

Adv
ances to the main map screen.
9.

There are 2 na
vigation menu screens. Use the
More... soft key to toggle between them. The second map
screen features the following soft keys.

Stored locations. Used to manage the stored data.

TMC (Traffic Message Channel). Provides data about
road conditions and any events that may affect the
current route.

Route options. Allows selection of various options for
the route.

Nav set-up. For setting personal preferences within the
navigation system.
10.
Cancel the current route guidance

.Selecting navigation
When navigation is selected after the ignition is turned
on, a caution screen is displayed. Touch Agree.
NOTE: At the first time of accessing the caution screen,
set the required language.
Setting a destination
Select Destination entry.
1.

Select
Address and enter address details using the
keyboard.
2.

As each par
t of the address is refined, touch OK
or List to display all of the streets and towns that are
available for selection.
3.

If the house n
umber is not known, press OK, the mid-
point of the road is then used as the destination.
4.

When the address entr
y fields are complete, press
OK to move to the map screen.
Start guidance
The map screen will display the selected destination.
Touch GO to start route calculation. Touch Review route
if you want to take an alternative route.
Touch Go to start guidance.
Review route
There will be a choice of 3 routes or Change route. 3
routes will display 3 different route options on the map.
Select Route 1, 2 or 3 by touching the respective box
displayed on the right side of the map and then select
GO.

Bluetooth® wireless technology
devices
See page 2, items 26 and 35
Connection must be made with the ignition on or the
engine running.
Use the following procedure in conjunction with your
phone manufacturer’s instructions.
Pairing and connecting using your phone
NOTE: The process of pairing and connecting a phone
to the vehicle will vary depending on the type of phone
used.
1. Switch the ignition on and make sure that the Touch
screen is active.
2. From the Home menu, select Phone.
3. If no phone is connected, select Search new,
otherwise select Change phone and then select Search
new.
4. Select the Device to vehicle option.
NOTE: The vehicle’s Bluetooth wireless technology
system is discoverable for only 3 minutes.
5. Using your phone, search for Bluetooth wireless
technology devices. On some phones, this is referred
to as new paired device. See your phone’s operating
instructions for further information.
6. When the vehicle’s system is discovered, begin the
pairing process and follow the on-screen instructions.
7. When requested, enter a PIN of your choice into your
phone and the vehicle system. Select OK.
8. When your phone is paired and connected, a
confirmation message will be displayed.
NOTE: Some phones require the pairing to be set as
‘authorised’ or ‘trusted’, in order to automatically connect.
Please refer to your phone’s operating instructions for
further information.
Downloading phonebook entries
When a phone with phonebook download capability
is paired and docked, its phonebook directory can be
automatically downloaded to the vehicle system.
See PHONEBOOK in the Owner’s Handbook for more
information.
Compatible Bluetooth wireless technology devices
can be paired with the vehicle’s in-built system.
For the latest compatibility information, refer to
www.jaguar.com. Select the required site. In the
OWNER area you can find in Bluetooth connectivity
information.
JJM189634141.indd 1411/03/2013 12:54:06