2014 INFINITI QX80 light

10
first drive features
Front Seat Adjustments
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To recline the seatback, push the switch 02
forward or backward.
SEAT LIFTER
To raise or lower the front portion or height of
the seat, push the front or back end of the switch
01 up or down.
LUMBAR SUPPORT

To adjust the seat lumbar support, push the front or back end of the swi\
tch 03.
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
010203
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:



•

Confirm the shift lever is in the
P (PARK) position.



•

Push the ignition switch to the
ON position.



•

Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions
using the adjusting switches for each feature.



•
Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.



•

The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.



•

The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key. To link a
memorized position to your INFINITI Intelligent Key, press the unlock bu\
tton on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1591592_14b_Infiniti_QX80_QRG_093013.indd 109/30/13 9:35 AM

14
first drive features
Headlight Control
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker,
tail, license plate and instrument panel lights.
Turn the switch to the
position 02 to turn on
the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it
is light. The system will keep the headlights on for a period of time af\
ter you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or position 02.
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light extuiguishes.
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams



selected for the fog lights to operate.
Turn the switch (inside collar) to the position 06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
03
04
05
06
1591592_14b_Infiniti_QX80_QRG_093013.indd 149/30/13 9:36 AM

17
06 REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH
Push the rear window defroster switch
to turn the system on or off.

This function automatically turns off after approximately 15 minutes.
07 AUTOMATIC INTAKE AIR CONTROL
In the auto mode, air intake will be controlled automatically.
This mode helps to adjust the inside vehicle temperature more effectivel\
y.
To manually control air recirculation inside the vehicle, press the air \
recirculation
button
08. The indicator light on the button will illuminate.
To return to the automatic control mode, push and hold the auto-recircul\
ation
button
07 until the indicator light on the button illuminates.
09 UPPER VENT BUTTON

When the upper vent button
is pressed, the air flow against the driver’s or

p
assenger’s upper body becomes gentle. The indicator light on the button will illuminate.\
In this mode, air from the upper ventilator flows to control the cabin t\
emperature without



blowing air directly on the occupants.
10 A/C BUTTON
Press the A/C button to manually turn the A/C on or off.
When on, this system not only provides cooler air, but removes humidity \
from the air to help
avoid window fogging.
11 REAR A/C BUTTON
This button will allow the front controls to operate
the front or rear climate control systems.
To operate the rear climate control system from
the front, press the REAR button so that the light
illuminates and the “Rear Air-conditioning” screen
is displayed.
To adjust the front climate control system, press the REAR button again.
For more information, refer to the “Instrument and controls (section 2)” or the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Rear Climate Controls
To activate the system:



1.
Press the REAR button

01 on the front control panel until Rear Air-conditioning screen
is displayed.



•


The indicator light will illuminate.



•


The Fan Speed, Temperature,
AUTO, and OFF buttons will now control the Rear
Air-conditioning system.
1591592_14b_Infiniti_QX80_QRG_093013.indd 179/30/13 9:36 AM

18
first drive features
FM/AM/SiriusXM* Satellite Radio With CD/DVD Player
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right
or left to increase or decrease the volume.
02 SEEK/CAT AND TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, pres\
s the



SEEK·CAT button or the TRACK button.
For SiriusXM Satellite Radio, press the SEEK·CAT button or the TRACK button
to switch to the first channel of the previous or next category.
To change tracks on a CD, press the SEEK·CAT button or the TRACK button.
04
0105060203
2. Press the REAR button
01 again, and the screen
will return to what was previously displayed.



•


The indicator light will stay illuminated to

indicate that the Rear Air-conditioning system
is active.
OFF button
02 — Turns off the rear climate control
system, and
REAR button indicator light.
Fan speed control buttons 03 — Press
or
to increase or decrease fan speed.
Temperature increase and decrease buttons 04 —
Adjusts the rear temperature up or down
.
AUTO button
05 — System automatically works to keep air flow and fan speed at a
constant temperature.
MODE button 06 — Changes the air flow mode. The air flow modes are:
The air outlet is fixed at foot level.
The air outlet is fixed at the head and foot level.
The air outlet is fixed at the head level.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
01
0205030406
1591592_14b_Infiniti_QX80_QRG_093013.indd 189/30/13 9:36 AM

19
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch
01. The CRUISE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAST/SET
switch
02 and release. Take your foot off the accelerator pedal. Your vehicle wil\
l maintain
the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
04.
To turn off cruise control, push the ON/OFF switch 01. The CRUISE indicator light in the
instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
To rewind or fast forward a track on a CD, press and hold the SEEK·CAT button
or the TRACK
button.
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for



SiriusXM Satellite Radio.
To store a station in a preset you must first select a radio band by pre\
ssing the



FM•AM 05 or
XM
06 button, then tune to the desired FM, AM or SiriusXM Satellite

Radio station.
Then press and hold the desired station preset button (1-6) until the preset number is



updated on the display and the sound is briefly muted. The channel indic\
ator will then




display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored



then press the corresponding station select button
(1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with op\
tional SiriusXM Satellite Radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591592_14b_Infiniti_QX80_QRG_093013.indd 199/30/13 9:36 AM

20
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance from
the vehicle traveling in front of you according to that
vehicle’s speed (up to the set speed) or at the set
speed when the road ahead is clear.
This system may not function properly due to
road conditions when direct sunlight, rain, mud,
snow or other road spray cause the sensor to
become blocked.
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than 1.5
seconds. The indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release it. Cruise control
will be set to the desired speed.
Press the distance button 04 repeatedly to change the set distance
between long, middle, and short.
When a vehicle is not detected ahead of you in the lane, the set distanc\
e and set vehicle
speed indicator lights will illuminate
05 in set mode.
When a vehicle is detected ahead of you in the lane, t he vehicle ahead detection, set
distance, and set vehicle speed indicator lights will illuminate
06 in set mode.
TO SET CONVENTIONAL FIXED SPEED CRUISE CONTROL MODE:
While cruise control is off, press the CRUISE ON/OFF button and hold it down for more than
1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
TO SWITCH BETWEEN THE TWO CRUISE CONTROL MODES:
When one of the two cruise modes is in use, you must turn the system off\
, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
01
04
0205
06
1591592_14b_Infiniti_QX80_QRG_093013.indd 209/30/13 9:36 AM

24
system guide
Navigation System
01 Destination (DEST) - Press to enter a destination
02 INFINITI controller
•


Slide or rotate to highlight an item on the screen and press
ENTER to select the
highlighted item.
•


On the map screen turn to adjust the map scale.
•


To scroll the map, slide the INFINITI controller in the direction you wa\
nt to scroll.
03 Information (INFO) - Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
04 SETTING - Press to access the system settings.
05 ROUTE - Press to access the guidance control functions such as guidance cance\
llation,
route priority, and waypoint settings on the route.
06 MAP - Press to display the map. While following a programmed route, press m\
ultiple times
to change the type of route information.
07 BACK - Press to return to the previous screen. In a settings screen, this bu\
tton can also
be used to apply the setting. In a character input screen, this button c\
an also delete the
characters that have been entered.
08 VOICE - Press to hear the current voice guidance for a programmed route.
09 STATUS - Press multiple times to display audio information, the air conditione\
r status,
fuel economy or navigation directions.
10 OFF - Press to switch between the day screen (bright) and the night scree\
n (dark).

Press and hold the button to turn the display off. Press again to turn t\
he display on.
For more information, please refer to your Navigation System Owner’s \
Manual.
01
06
0708
05
02
03
09
04
10
1591592_14b_Infiniti_QX80_QRG_093013.indd 249/30/13 9:36 AM

25
HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage

doors, property gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink and ob\
serve the
indicator light:



•

A solid continuous light indicates the programing is complete and the Ho\
meLink button
will activate your device.



•

A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:



•

At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programmed HomeLink button for 2 seconds and release.\
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1591592_14b_Infiniti_QX80_QRG_093013.indd 259/30/13 9:36 AM