2014 INFINITI QX60 HYBRID display

Enlarged intersection view
When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection on the left screen. After
passing through the intersection, the
system automatically returns to the full
screen mode. To switch to the full screen
mode while the enlarged intersection view
is displayed, push

5. Route guidance
5-10
Split screen settings
The display setting on the left-hand side
screen shown during route guidance can
be changed.
1. Pushwhile the current location
map screen is displayed.
2. Highlight [Map View] and push .
3. Highlight [View Settings] and push
. 4. Highlight the preferred screen and
push . The indicator of the
selected screen illuminates.
Intersection:
The map screen and the enlarged intersec-
tion view can be displayed at the same
time.
Push

display the fuel economy information,
push

5. Route guidance
5-12
freeway or toll road, all exits along the
route which have exit information will be
shown in the turn list. The exit information
is shown as icons.
Displaying turn list automatically on free-
way:
When [Auto. Show Turn List on Freeway] is
set to ON, the turn list will be automatically
displayed while the vehicle travels on a
freeway or toll road.
Selecting a waypoint from the exit infor-
mation list:
When exit information is displayed on the
turn list, a waypoint to a facility located
near the freeway exit can be set as a
waypoint.
1. Highlight the exit where the exit in-formation icon is displayed, and push
. The category list screen is
displayed.
2. Highlight the landmark category andpush . The list screen for
showing facilities located near the
freeway exit is displayed.
3. Highlight the preferred facility for the waypoint and push .
4. The waypoint is set, and the route
search is performed.
“Procedures after setting destina-
tion” (page 5-2)

5. Route guidance
5-14
CANCELING/REACTIVATING ROUTE
A route that is already set can be canceled
at any time. If a route is deleted, the
destination and waypoints are also can-
celed.
It is also possible to reactivate a canceled
route.
INFO:
Canceling a route does not delete the destina-
tion and waypoint information completely.
“Delete destination”(page 4-24)
Canceling route
1. Push.
2. Highlight [Cancel Route] and push .
3. A confirmation message is displayed.
Highlight [Yes] and push .
The route is canceled along with the
destination and waypoints.
Voice command
1. Push >located on the steering
wheel.
2. After the tone sounds, speak a com- mand.
To cancel a route:
"Cancel Route" (Alternate Command
Mode)
Reactivating route
1. Push .
2. Highlight [Resume Route] and push .
3. A confirmation message is displayed.Highlight [Yes] and push . The
canceled route is reactivated.

5. Route guidance
5-16
1. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight [Add Destination] or [Add Waypoint] and push .
If [Add Destination] is selected, the
current destination changes to a way-
point.
4. Set a destination or waypoint. The method of searching for a destination
or waypoint is the same as the one for a destination.
“4. Setting destination”
5. The selected location is displayed at
the center of the map. Highlight [Add to
Route] after confirming the location and
push .
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
“Editing/deleting destination or way-
point” (page 5-17)
6. Return to the [Edit Route] screen. Set
the route conditions as necessary.
7. Highlight [Calculate] and push .
The system will recalculate the routes.
After the route search is completed, the
display will automatically return to the
current location map screen.
INFO:
.
The prior route is automatically deleted.
.Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and is pushed.

Editing/deleting destination or
waypoint
The destination or waypoint that has
already been set can be modified or
deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated ac-
cordingly.
1. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
4. Highlight [Move Dest.] to modify the
location and push .
“Moving location of destination”
(page 5-5)
5. Highlight [Delete] and push to
delete the location.
6. A confirmation message is displayed. Confirm the contents of the message,
highlight [Yes] and push . The
destination or waypoint is deleted from
the route. Return to the [Edit Route]
screen.
7. By highlighting [Calculate] and pushing
, the system will recalculate the
routes. After the route search is com-
pleted, the display will automatically
return to the current location map
screen.
5. Route guidance
5-17

5. Route guidance
5-18
INFO:
.
If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and
waypoints
The order of a destination and waypoints
that have already been set can be changed.
1. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
4. Highlight [Change Order] and push
. A list of the destination and
waypoints is displayed.
5. Highlight a preferred destination orwaypoint to replace the previously
selected destination or waypoint and
push .
6. A message is displayed and the order
of the destination or waypoint is
changed.
7. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
plete, the display will automatically
return to the current location map
screen.