2014 HONDA ACCORD SEDAN display

2627
Using HFL
PickUp button:Answer anincoming call or go to a phone specific voice portal screen.
HangUp/Back button:End acall, decline an incoming call, or cancel an operation.
Talk button: Make a call using a stored voice tag, phonebookname, or phone number.
B L U E T O O T H® H A N D S F R E E L I N K®( H F L )
Make and receive phone calls through your vehicle’s audio system. Visithandsfreelink.honda.comto check if this feature is compatible with your phone.
To reduce the potential for driver distraction, certain functions may beinoperable or grayed out while the vehicle is moving. Stop or pull over toperform the function.
Use these buttons to navigate through the HFL menus.
PHONE button: Go to the phone screen.
BACK button: Cancel an operationor return to theprevious screen.
SETTINGS button: Go to Phone Settingsto pair a phone andset up text/emailoptions.
Interface Dial:Rotate to scrollthrough selectionsand press to make aselection.
MENU button: From the Phonescreen, access SpeedDial, Redial, CallHistory, Phonebook,Dial, and Text/EMailoptions.
FM Traffic
Displaying Traffic Information
Say “Display traffic”to view traffic flow and incident icons.
Note:Traffic flow and incident icons aredisplayed on map scales of 5 miles or less.
Heavy traffic
Moderate trafficIncident
I n c i d e n t I c o n s
Congestion
Construction
Road closed
Weather
1. Say “Display traffic on my route”toview a list of incidents on your route.
2. Say the number of the incident youwant to avoid.
3. Say “Avoid”and the incident listreturns.
4. Say “Recalculate route”to set thenew route.
Traffic ReroutingTM
The system can automatically provide detours around traffic or incidentswhen a destination is set and Traffic Rerouting is turned on in Navi Settings(see page 10), or you can manually reroute.
Provides continuously updated information, including traffic speed, incidents, andconstruction in major metro areas.
IncidenticonIncidenticon
TrafficFlowdata
TrafficFlowdata
Press and release the Talk button before you say a command.
14 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 7/18/2013 9:08 AM Page 15

2\b29
Use the interface dial to make and enter selections.
Pairing Your Phone
Pair your phone when the vehicle is stopped to begin using hands\bfree phone and
related audio functions.
\f. Press SETTINGS.
2. Select Phone Settings.
3. Select Bluetooth Device List (if no phone has been paired) or Connect
Phone (if pairing an additional phone).
4. Select Add Bluetooth Device.
5. Make sure your phone is in discovery mode and select OK.
6. HFL searches for your phone. Select your phone when it appears on the
list.
If your phone does not appear:
Select Phone Not Found and search
for HandsFreeLink from your phone.
7. HFL gives you a six\bdigit code. Compare it to the code that appears
on your phone. Connect to HFL from
your phone.
8. The system asks if you want to enable Phone Synchronization. Select On to
automatically import contacts and call
history.
Receiving a Call
A notification is heard and the incoming call information appears on the display.
Press the Hang\b
Up button to
end or decline
the call.
Press the Pick\b
Up button to
answer the call.You can also select the icons
on the touchscreen.
Using Voice Commands
Use the interface dial to make and enter selections.
Dialing a Number
Enter a \f0\bdigit phone number to call.
Using the Menu*
*Manual operation is limited while the vehicle is moving. Voice commands are always available.
\f. Press PHONE.
2. Press MENU.
3. Select Dial.
4. From the navigation screen or the touchscreen, enter the phone number.
Select the green phone icon to call.
\f. Say “Dial by number.”
2. Say the phone number. For example, “31\b555123\f.”
3. The system begins to dial.
Use the interface dial to make and enter selections.
Using Speed Dial and Call History
Store 20 speed dial entries for quick calling, or view the last 20 calls.
\f. Press PHONE.
2. From the Speed Dial tab, scroll through the list to find the entry you
want to call, and select it to call.
For Call History, move the interface
dial to the right and scroll through
the list.
Press and release the Talk button before you say a command.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f08 AM \APage 1\b

3031
Use the interface dial to make and enter selections.
Using the Phonebook
When your phone is paired, its entire phonebook is automatically imported to the system. Phone synchronization must be on for this feature to work.
Using Voice Commands
Using the Menu*
*Manual operation is limited while the vehicle is moving. Voice commands are always available.
1. Press PHONE.
2. Press MENU.
3. Select Phonebook.
4. Scroll through the list to find the nameand number you want to call, and select it to call.
1. Say “Call by name.”
2. Say the phonebook name and phonetype. For example, “John Smith mobile.”
S M S T E X T M E S S A G I N G A N D E M A I L
Use the interface dial to make and enter selections.
Receiving Messages
Use the interface dial to make and enter selections.
Replying to Messages
Receive and send text messages and emails from your paired and linked phone using Bluetooth®HandsFreeLink®. Visit handsfreelink.honda.comto see if this feature iscompatible with your phone. Standard message rates apply. This feature is limitedwhile the vehicle is moving.
1. A notification appears on the display.Select Read to open the message.
2. The message is displayed, and thesystem reads it aloud.
1. With the message open, select Reply.
2. Select one of the six available replymessages.
3. Select Send to send the message.
Note:Notifications and operation for SMS Text and Email are separate. Choose yourdesired account in Phone Settings (see page 10).
Use the interface dial to make and enter selections.
Calling the Sender
1. With the message open, select Call.
2. The system begins dialing the number.
Press and release the Talk button before you say a command.
14 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 7/18/2013 9:08 AM Page 17

3435
SONG BY VOICETM(SBV)
Play songs from your iPod and HDD from most screens by using simple voice
commands.
HARD DISC DRIVE (HDD) AUDIO
Record CDs onto your vehicle’s hard disc drive. Songs are automatically recorded once a
CD is inserted into the disc slot.
Select the HDD
icon from Source.
Playing HDD Audio
\f. Select Source and select the HDD icon. The last recorded album begins playing.
2. Use the touchscreen or steering wheel controls to change tracks.
Searching for Music
\f. Press AUDIO. Use the interface dial to make and enter selections.
2. Press MENU.
3. Select Music Search.
4. Select one of the categories.
5. Select a track and press ENTER to begin playing.
Using the “Play” Command
\f. Say “Music search.”
2. Say “Play” and a search option. For example,“Play artist XYZ” or “Play song XYZ.”
3. The system plays the first song by the artist or the specified song and returns to your
original screen.
Using the “List” Command
\f. Say “Music search.”
2. Say “List” and a search option. For example, “List artist XYZ” or “List album XYZ.”
3. A list of tracks by the artist or album is displayed. Say the number of your selection.
For example, “One.”
4. The system plays the selected song and returns to your original screen.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f09 AM \A Page 19