1415
M U L T I V I E W R E A R C A M E R A
How It Works
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
Normal Top down
Wide (default)
• When you shift into Reverse (R), a real\btime image of the area behind your
vehicle is shown in the upper display, along with helpful parking guidelines.
• Press the interface dial to toggle between views.
• The display turns off when you shift out of Reverse.
Changing Settings
Turn the guidelines on or off.
\f. Press SETTINGS. Use the interface dial to make and
enter selections.
2. Select Camera Settings.
3. Select Rear Camera.
4. Select one of the options. Fixed Guidelines: Guidelines
appear when you shift into
Reverse. Select On or Off.
Dynamic Guidelines: Guidelines
move as you turn the steering
wheel. Select On or Off.
5. Press BACK to exit the menu.
L A N E W A T C HT M
Helps you check your right blind spot when you make a lane change to the right.
Visibility \brea
How It Works
When the right turn signal is activated, a camera located in the passenger side
door mirror shows the right rear area outside your vehicle on the display.
LaneWatch Display
Press the LaneWatch button on the turn signal switch to view a constant real\btime
display. Press it again to turn the display off. The display still appears when the right
turn signal is activated.
See your Owner’s Manual for information on adjusting LaneWatch settings.
Display
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f08 AM \APage 9
1617
L A N E D E P A R T U R E W A R N I N G ( L D W )
Alerts you if your vehicle begins to move out of a detected lane without the turn sig\2nal
activated.
How It Works
Turning LDW On or Off
Press the LDW button to turn the system on or off. A green indicator light appear
on the button when the system is on.
LDW may not activate under certain conditions. See your Owner’s Manual for more information.
If you cross a lane line without using your turn signal, the
LDW indicator flashes and a beep sounds.
A camera mounted between the windshield and the rearview mirror determines
if your vehicle begins to move away from the center of a detected lane while
driving between 40 _
90 mph.
F O R W A R D C O L L I S I O N W A R N I N G ( F C W )
How It Works
Alerts you to the possibility of a front\bend collision.
FCW may not activate under certain conditions. See your Owner’s Manual for more information.
At \f0 mph or higher, if the camera mounted in the center of the \2upper windshield
detects a vehicle in front of you and the system determines a collision is likely, the
system provides you with the following visual and audible alerts.
If you do not brake in time or take preventive action, the heads\bup light near
the windshield flashes twice, the FCW indicator flashes continuously, and a
beep sounds continuously.
Changing Settings
Determine the warning timing, or turn the system off.
\f. Press SETTINGS. Use the interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Forward Collision Warning Distance.
4. Select Long, Normal, Short, or Off.
5. Press BACK to exit the menu.
Short
Normal
Long
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f08 AM \APage 10
