2014 FORD TRANSIT CONNECT Owners Manual

Page 297 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Press the AUX button, then scroll to:
Action and Description
Message
Press the 
OK button to enter the media menu.
Menu
Press the 
OK button.
Settings
Press the 
OK button.
Bluetooth Devices
Select on

Page 298 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Action and Description
Message
1. Press the OK button.
2. Press the 
OK button to confirm.
Exit the current menu.
Return
* This is a speed-dependent feature. It is only available when your vehicle is

Page 299 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Action and Description
Message
Return to the factory default settings. This selection does
not erase your indexed information, for example phonebook,
call history, text messages and paired devices.
Fa

Page 300 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Phone issues
Possible solution(s)
Possible cause(s)
Issue
Try turning off the device,
resetting the device or
removing the devices
battery, then trying again.
This may be a possible
phone malfunction

Page 301 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Phone issues
Possible solution(s)
Possible cause(s)
Issue
Check the security and auto
accept and prompt always
settings relative to the SYNC
Bluetooth connection on
your phone.
Update your devices fi

Page 302 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual USB and media issues
Possible solution(s)
Possible cause(s)
Issue
Make sure that the device
does not have an auto-
install program or active
security settings.
Make sure you are not
leaving the device

Page 303 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Vehicle Health Report and Services (Traffic, Directions and Information) issues
Possible solution(s)
Possible cause(s)
Issue
Make sure that your VIN is
correctly listed in your
account.
When you regis

Page 304 of 411

FORD TRANSIT CONNECT 2014 2.G Owners Manual Voice command issues
Possible solution(s)
Possible cause(s)
Issue
Review the phone voice
commands and the media
voice commands at the
beginning of their respective
sections.
You may be using the wrong