2014 FORD F150 oil capacities

ENGINE SPECIFICATIONS
6.2L V8 engineEngine
102 x 95 mm (4.01 x 3.74 in)Bore x Stroke
6.2L (6207 cc)Displacement
9.8:1Compression ratio
401 hp at 5500 rpm on 87 octane, 411 hp at5500 rpm on 91 octaneHorsepower (SAE net)
434 lb-ft at 4500 rpm on 87 octane, 434 lb-ftat 4500 rpm on 91 octaneTorque
6000 rpmRedline
64.6 hp/l on 87 octane, 66.2 hp/l on 91 octaneSpecific output
Single overhead cam, roller rocker shaft withhydraulic lash adjustment, inverted-toothchain drive, ovate-wire valve springs, twovalves per cylinder
Valvetrain
Sequential electronic fuel injection, returnlessfuel systemFuel system
Coil-on-plug electronic ignition with secondarywire and dual-plugIgnition system
Single 80 mm (3.15 in)Throttle body
Cast-iron high silicon, molybdenum (HiSiMo)Exhaust manifolds
Drivetrain
Modified rear axle for track width, 4.10 ratioRear axle
Aluminum with hardened yokeDriveshaft
RatioGearGear ratios
4.171st
2.342nd
1.523rd
1.144th
29F150 (TF6)Capacities and Specifications

0.875th
0.696th
3.40Reverse
MOTORCRAFT PARTS
6.2L V8 engineComponent
FA-1883Air filter element
BTX-59 or BTX-65-6501Battery
FL-820SOil filter
2Spark plugs
1Heavy-duty battery, if equipped.2For spark plug replacement, see your authorized dealer. Refer your scheduled maintenanceinformation for the appropriate intervals for changing the spark plugs.
Replace the spark plugs with ones that meet Ford material and design specifications foryour vehicle, such as Motorcraft or equivalent replacement parts. The customer warrantymay be void for any damage to the engine if such spark plugs are not used.
30F150 (TF6)Capacities and Specifications

TECHNICAL SPECIFICATIONS
Ford part number /Ford specificationFord part name orequivalentCapacityItem
XO-5W20-QSP orXO-5W20-QFS(U.S.); CXO-5W20-LSP12 or CXO-5W20-LFS12(Canada) / WSS-M2C945-A
Motorcraft SAE 5W-20 Motor Oil6.6L (7.0 qt)(includes filterchange)
Engine oil 1,2
VC-3DIL-B (US);CVC-3DIL-B(Canada) / WSS-M97B44-D2
Motorcraft OrangeAntifreeze/CoolantPrediluted
16.0L (16.9 qt)Engine coolant3
XY-80W90-QL(US); CXY-80W90-1L (Canada) / WSP-M2C197–A
Motorcraft SAE 80W-90 Premium RearAxle Lubricant (US);Motorcraft SAE 80W-90 Premium AxleLubricant (Canada)
1.7L (3.6 pt)Front axle lubricant4
XY-75W85-QL /WSS-M2C942-A75W-85 PremiumSynthetic HypoidGear Lubricant
2.6L (5.5 pt)Rear axle lubricant5
——98.4L (26 gal)SuperCab fuel tank
——136.3L (36 gal)CrewCab fuel tank
31F150 (TF6)Capacities and Specifications

Ford part number /Ford specificationFord part name orequivalentCapacityItem
XT-10-QLV /MERCON LVXT-10-QLVC (US); CXT-10-LV12 (Canada)
Motorcraft MERCONLV ATF12.4L (13.1 qt) 7Transmission fluid6
XL-12 (US); CXL-12(Canada) / ESP-M2C166-H
Motorcraft TransferCase Fluid1.4-1.5L (2.9-3.1pt)Transfer caselubricant
1Your engine has been designed to use Motorcraft motor oils or equivalent oil brands thatmeet Ford's specifications. It is also acceptable to use motor oils of the recommendedviscosity grade that meet API SN requirements and displays the API Certification Markfor gasoline engines.2Do not use oils labeled with API SN service category unless the label also display the APIcertification mark. These oils do not meet the requirements of your vehicles engine andemissions system. Do not use supplemental engine oil additives. They are unnecessaryand could lead to engine damage that is not covered by Ford’s warranty.3Add the coolant type originally equipped in your vehicle.4 Add 118 ml (4 fluid oz.) of Additive Friction Modifier XL-3 (US) / CXL-3 (Canada) orequivalent meeting Ford specification EST-M2C118-A for a complete refill of Torsen™limited slip differential front axles.5Fill 6 millimeter to 14 millimeter (1/4 inch to 9/16 inch) below bottom of fill hole.
Note:Your vehicle’s rear axle is filled with a synthetic rear axle lubricant and is consideredlubricated for life. These lubricants do not need to be checked or changed unless a leak issuspected, service is required or the axle assembly has been submerged in water. The axlelubricant should be changed any time the rear axle has been submerged in water.
Note:Do not add Additive Friction Modifier to the rear axle.6Make sure the correct automatic transmission fluid is used. Transmission fluidrequirements are indicated on the dipstick or on the dipstick handle. Check the containerto verify the fluid being added is of the correct type. Refer to your scheduled maintenanceinformation to determine the correct service interval.7Approximate dry fill capacity including transmission fluid cooling system, actual refillcapacities will vary based on vehicle application and transmission fluid cooling system(for example: coolers size, cooling lines, auxiliary cooler capacities). The amount oftransmission fluid and fluid level should be set by the indication on the dipstick’s normaloperating range.
32F150 (TF6)Capacities and Specifications