2014 FIAT PUNTO engine

185
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
IDENTIFICATION DATA ................................................. 186
ENGINE CODES – BODYWORK VERSIONS ............. 188
ENGINE .................................................................................. 189
FUEL SUPPLY ........................................................................ 190
TRANSMISSION .................................................................. 190
BRAKES .................................................................................. 191
SUSPENSIONS ...................................................................... 191
STEERING SYSTEM ............................................................. 191
WHEELS ................................................................................. 192
PERFORMANCES ................................................................ 195
DIMENSIONS ....................................................................... 196
WEIGHTS .............................................................................. 197
CAPACITIES .......................................................................... 199
FLUIDS AND LUBRICANTS ............................................. 200
FUEL CONSUMPTION ...................................................... 202
CO
2EMISSIONS .................................................................. 203
T T
E E
C C
H H
N N
I I
C C
A A
L L

S S
P P
E E
C C
I I
F F
I I
C C
A A
T T
I I
O O
N N
S S
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 185

186SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
VIN PLATE fig. 1
The plate can be found on the left side of
the boot floor and it bears the following
identification data:
BType-approval number.
CVehicle type code.
DChassis number.
EMaximum vehicle weight fully loaded.
FMaximum vehicle weight fully loaded
with trailer.
GMaximum weight on front axle.HMaximum weight on rear axle.
IEngine type.
LBody version code.
MNumber for spare parts.
NCorrect smoke opacity index (for
diesel engines).
IDENTIFICATION DATAWe recommend taking note of the iden-
tification codes. The following identifica-
tion codes are printed and shown on the
plates:❒
Vehicle identification number (VIN)
plate.
❒
Chassis marking.
❒
Bodywork paint identification plate.
❒
Engine marking.
fig. 1
F0M0368m
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 186

187
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
CHASSIS MARKING fig. 3
It is printed on the passenger compart-
ment floor, near or under the front pas-
senger seat.❒
car model (ZFA 199000);
❒
chassis number.ENGINE MARKING
This is printed onto the cylinder block and
shows the type and production serial num-
ber.
BODYWORK PAINT
IDENTIFICATION PLATE fig. 2
This can be found on the external rear
door pillar (left-hand side) and it bears the
following information:
APaint manufacturer.
BColour name.
CFiat colour code.
DColour code for touch-ups or re-
spraying.
fig. 2
F0M0167m
fig. 3
F0M0646m
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 187

188SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
ENGINE CODES – BODYWORK VERSIONSEURO 4 TYPE-APPROVAL EURO 6 TYPE-APPROVAL EURO 5+ TYPE-APPROVAL
Body version code
Version Engine code 3 doors 5 doors
1.2 169A4000 199AXZ1A 58 199BXZ1A 591.4 350A1000 199AXB1A 56 199BXB1A 57
(*) For versions/markets, where provided
Body version code
Version Engine code 5 doors
1.2 199A4000 199BXA1A 01E1.4 350A1000 199BXB1A 03S
1.3 Multijet 75HP 199A2000 199BXC1A 05L
Body version code
Version Engine code 3 doors 5 doors
1.3 Multijet 75HP 199A9000 199AXT1A 37L 199BXT1A 38L1.3 Multijet 85HP 199B4000 199AXY1A 48D 199BXY1A 49D
EURO 5 TYPE-APPROVAL
Body version code
Version Engine code 3 doors 5 doors
1.2 169A4000 199AXZ1A 50G 199BXAZA 51G
350A4100 199AXB1A 02Y 199BXB1A 03Y
1.4
199A7000 (*) 199AXH1A 19L (*) 199BXH1A 20L (*)
1.3 Multijet 75HP 199A9000 199AXT1A 37 199BXT1A 38
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 188

189
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
ENGINEINFORMATIONType codeCycleNumber and layout of cylindersPiston bore and stroke mmTotal capacity cm
3
Compression ratioMax power (EEC) kW
HPcorresponding speed rpm
Max torque (EEC) Nm
kgmcorresponding speed rpm
Spark plugsFuel (●) For versions/markets, where provided (
▲) Euro 5 - Euro 5+ (
■) Euro 4
1.3 Multijet
75HP199A9000(
▲)
199A2000 (■)
Diesel
4 in line
69.6 × 82
1248
16.8:1(
▲)
17.6:1 (■)
55
75
4000
190
19.4
1500
–
Diesel for
motor vehicles
(EN590
specifications)
1.4
350A1000
199A7000 (
●)
Otto
4 in line
72 × 84
1368
11.1:1
57 / 55 (
●)
77 / 75 (●)
6000
115
11.7
3250
NGK
ZKR7A-10
Champion
RA8MCX4
Unleaded petrol
95 RON
(Specification
EN228)
1.2 (Euro 4)199A4000
Otto
4 in line
70.8 × 78.86
1242
11.1:1
48
65
5500
102
10.4
3000
NGK
ZKR7A-10
Champion
RA8MCX4Unleaded petrol
95 RON
(Specification
EN228)
1.3 Multijet
85HP199B4000
Diesel
4 in line
69.6 x 82
1248
16.8:1
62
85
3500
200
20.4
1500
–Diesel for
motor vehicles
(EN590
specifications)
1.2 (Euro 5 -
Euro 6)169A4000
Otto
4 in line
70.8 x 78.86
1242
11.1:1
51
69
5500
102
10.4
3000
NGK
ZKR7A-10
Champion
RA8MCX4Unleaded petrol
95 RON
(Specification
EN228)
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 189

1.3 Multijet
85HP
–
–
45
5 ÷ 7
6.7
–
–
3.0
3.2
1.7 (
■)
0.5
2.2
4.5 1.4
45
5 ÷ 7
–
–
5.3
2.4
2.6
–
–
1.5 (
●)
0.5
2.2
4.5 1.2
45
5 ÷ 7
–
–
5.3
2.4
2.6
–
–
1.5 (
●)
0.5
2.2
4.5
CAPACITIESFuel tank: litres
including a reserve of: litresFuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litresEngine sump and filter: litres
Engine sump: litresEngine sump and filter: litres
Gearbox/differential
casing: kgHydraulic brake circuit: kg
Windscreen/rear window
washer fluid reservoir: litres with headlight washers: litres(❒) For particularly harsh climate conditions, a mixture of 60% PARAFLU
UP
and 40% distilled water is recommended.
(
▲) Per condizioni climatiche particolarmente rigide, si consiglia l’utilizzo di TUTELA TRANSMISSION GEARFORCE.
(*) Euro 4
(**) Euro 5 - Euro 5+
Recommended fuels
and original lubricants
Unleaded petrol with no less
than 95 R.O.N.
(EN228 Specification)
Diesel for motor vehicles
(EN590 Specification)
50-50 mixture of water and
PARAFLU
UP
liquid (
❒)
SELENIA K P.E.
SELENIA WR P.E.
TUTELA
CAR TECHNYX(
●) (▲)
TUTELA TRANSMISSION
GEARFORCE(
■)
TUTELA TOP 4
Mixture of water and
TUTELA
PROFESSIONAL SC35
199
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
1.3 Multijet
75HP
–
–
45
5 ÷ 7
7,4 *
6,7 **
–
–
3.0
3.2
1.7 (
●)
0.5
2.2
4.5
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 199

200SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTSYour car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
SPECIFICATIONS AND RECOMMENDED PRODUCTS
Use Quality specifications of fluids and lubricants Original Replacement
for correct car operation fluids and lubricants interval
Lubricants for
petrol engines
Lubricants for
diesel enginesIn case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated ACEA
performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.SAE 5W-40 ACEA C3
grade synthetic base lubricant.
FIAT 9.55535-S2 certification.
SAE 5W-30
grade synthetic base lubricant.
FIAT 9.55535-S1 certification.SELENIA K P.E.
Contractual Technical
Reference
N° F603.C07
SELENIA WR P.E.
Contractual Technical
Reference
N° F510.D07As per
the Scheduled
Servicing Plan
As per
the Scheduled
Servicing Plan
The use of products with specifications other than those indicated above could cause damage
to the engine not covered by the warranty.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 200

201
SAFETYSTARTING
AND DRIVINGWARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYSERVICE
AND CAREINDEXCONTROLS
AND DEVICESTECHNICAL
SPECIFICATIONS
Brake liquid
Fuel additiveUse Quality specifications of fluids and lubricants Original Applications
for correct car operation fluids and lubricants
(*) IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(❒) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLU
UP
and distalled water. Windscreen/rear
window washer
fluidMechanical gearbox and
differential (petrol and
1.3 Multijet 75HP versions)
Mechanical gearbox and
differential (1.3 Multijet
85HP versions)
Wheel side
constant-velocity joints
Differential side
constant-velocity joints
Hydraulic brakes
and hydraulic clutch con-
trols
Cooling circuit.
Mixture: 50% water and
50% PARAFLU
UP
(❒)
Mix 25cc per 10 litres of
diesel
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems TUTELA CAR TECHNYX
Contractual Technical
Reference N° F010.B05
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference N° F702.G07
TUTELA ALL STAR
Contractual Technical
Reference N° F702.G07
TUTELA STAR 700
Contractual Technical
Reference N° F701.C07
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
PARAFLU
UP
(*)
Contractual Technical
Reference N° F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference N° F601.L06
TUTELA
PROFESSIONAL SC35
Contractual Technical
Reference N° F201.D02 Lubricants
and greases
for drive
transmission
system
Radiator
protection SAE 75W-85 grade synthetic base lubricant.
FIAT 9.55550-MX3 certification
SAE 75W grade synthetic base lubricant.
FIAT 9.55550-MZ6 certification
Molybdenum disulphide grease, for use at
high temperatures.
FIAT 9.55580 certification. NL.GI. 1-2 consistency
Grease for constant-velocity joints with low
friction coefficient.
FIAT 9.55580 certification. NL.GI. 0-2 consistency
Synthetic fluid FMVSS n° 116 DOT 4, ISO 4925
SAE J1704, CUNA NC 956- 01.
FIAT 9.55597 certification
Inhibited mono ethylene glycol-based antifreeze
protection, red, with organic formulation.
Passes CUNA NC 956-16, ASTM D 3306 specifications.
FIAT 9.55523 certification
Additive for diesel antifreeze, protecting
diesel engines
Mixture of alcohol, water and surfactants
CUNA NC 956-II
FIAT 9.55522 certification.
185-208 PUNTO POP 1ed EN 24/09/13 14.26 Pagina 201