2014 Citroen DS5 RHD Owner's Manual

47Monitoring
System allowing certain screens to be switched
off for night driving (available only with
eMyWay).
The instrument panel remains on with the
vehicle speed, electronic gearbox gear
selected, cruise control or speed limiter
information, if in use, and the low fuel alerts if
necessary.
If there is an alert or a change in a function
or to a setting, the black panel mode is
interrupted.









Black panel (black screen)
with eMyWay

For more information, refer to the
eMyWay part of the "Audio and
telematics" section.

Clock

The analogue clock does not have an
adjustment button.
To set the time, refer to the section relating to
the screen (audio system) configuration menu.
The clock is synchronised with the screen time;
once the the setting has been confirmed in
the screen, the hands will turn to synchronise
with the screen, and each time the ignition is
switched on.

Setting the date and time






















Audio system / Bluetooth


Press MENU
.



Using the arrows, select " Personalisation-
configuration
" and confirm.
Using the arrows, select " Display
configuration
" and confirm.

Using the arrows, select " Date and time
adjustment
" and confirm.

Select the setting to be modified. Confirm
by pressing OK
, then make the change and
confirm again to save the modification.

Adjust the settings one by one, confirming by
pressing the OK
button. Next select the " OK
"
tab on the screen then confirm to exit from the
" Date and time adjustment
" menu.

49Monitoring




















eMyWay


Select " Synchronize the minutes
with GPS
" so that setting the minutes
is done automatically by satellite
reception.








The clock, located in the dashboard,
is synchronised with the time in the
screen. It is set once the time is
adjusted using the " SETUP
" menu and
every time the ignition is switched on.

Press SETUP
to display the " Configuration
"
menu.
Select " Display configuration
" and confirm.

Select " Set date and time
" and confirm.

Select the setting to adjust.
Confirm by pressing OK
, then adjust the setting
and confirm again to save the modification.

Adjust the settings one by one.
Then select " OK
" on the screen and confirm to
save the settings.

Tr i p c o m p u t e r


System that gives you information on the journey in progress (range, fuel consumption…).




When the trip required is displayed, press
the control for more than two seconds
or use the left hand thumb wheel of the
steering mounted controls.
Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures, and trip "2"
for monthly figures.











Instrument panel screen

Information display





Press the button on the end of the wiper
control stalk
to display the various tabs in
succession.



- The current information tab with:


●
the range,

●
the current fuel consumption,

●
the Stop & Start time counter.





- Tr i p "1"
with:


●
the average speed,
for the first trip.

●
the average fuel consumption.





- Tr i p "2"
with:


●
the average speed,
for the second trip.

●
the average fuel consumption.




Tr i p r e s e t




- Radio or media.

- Satellite navigation.

51Monitoring
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop. This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.






Trip computer, a few definitions…


Range

(miles or km)
This indicates the distance
which can still be travelled with
the fuel remaining in the tank
in relation to the average fuel
consumption over the last few
miles (kilometres) travelled.
When the range falls below 20 miles (30 km),
dashes are displayed. After filling with at least
5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km). This function is only displayed from
20 mph (30 km/h).


Current fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption
during the last few seconds.

Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel
consumption since the last trip
computer zero reset.


Average speed

(mph or km/h)
This is the average speed calculated
since the last trip computer zero
reset (ignition on).









Stop & Start time
counter
(minutes / seconds or hours /
minutes)
If your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode during a journey.
It resets to zero every time the ignition is
switched on with the START/STOP button.

002
Access

Electronic key
remote control

Unlocking the vehicle


Complete unlocking
Selective unlocking

System which permits central unlocking or
locking of the vehicle using the lock or from a
distance. It is also used to locate and start the
vehicle, as well as providing protection against
theft.
This setting is done in the
configuration menu.
Complete unlocking is activated by
default.

Unlocking is confirmed by rapid flashing
of the direction indicators for around
two seconds.
At the same time, depending on
version, the door mirrors unfold.




To unlock only the driver's door,
press the open padlock once.


Press the open padlock to unlock
the vehicle.



To unlock the other doors and the boot,
press the open padlock again.