2014 Citroen DS3 eco

197
DS3_en_Chap10_info-pratiques_ed01-2014
In the event of a fault with the the ScR emissions control system
If it is a temporary fault, the alert d
isappears   once   the   exhaust   gas  
e

missions   return   to   normal.
A
 
system
 
that
 
prevents
 
engine
 
s

tarting
 
is
 
activated
 
automatically
 
f

rom
 
650 miles
 
(1
 
100
 
km)
 
after
 
c

onfirmation
 
of
 
a
 
fault
 
with
 
the
 
SCR
 
e

missions
 
control
 
system.
 
Have
 
the
 
s

ystem
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
o

r
 
a
 
qualified
 
workshop
 
as
 
soon
 
as
 
p

ossible.
In the event of the detection of a fault
du
ring an authorised driving phase (between
650 miles and 0 miles) (1 100 km and 0 km)
When
  switching   on   the   ignition,   the   UREA,  
S

ERVICE   and   diagnostic   warning   lamps   comes  
o

n,
 
accompanied   by   an   audible   signal   and   the  
d

isplay
 o
f
 a m
essage
 "
Emissions
 f
ault"
 t
o
 s
ignal
 a

 
fault
  with   the   emissions   control   system.If   a   fault   with   the   SCR   system   is   confirmed  
(

after   30   miles   (50   km)   covered   with   the  
p

ermanent   display   of   the   message   signalling  
a

  fault),   when   switching   on   the   ignition,   the  
S

ERVICE
 an
d
 e
ngine
 d
iagnostic
 w
arning
 lam
ps
 c

ome   on   and   the   UREA   warning   lamp   flashes,  a
ccompanied   by   an   audible   signal   and   the  d
isplay   of   a   message   (e.g.:   "Emissions   fault:  
S

tarting   prevented   in   150   miles")   indicating   the  
r

emaining   range   express   in   miles   or   kilometres.
While
  driving,   the   message   is   displayed   every  
3

0   seconds   while   the   fault   with   the   SCR   system  
p

ersists.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
ot

her wise, you will not be able to restart your
engine.
Practical information

DS3_en_Chap10_info-pratiques_ed01-2014
Freezing of the AdBlue®
additive
The adblue® additive freezes at
temperatures   below   around   -11°C.
The
 
SCR
 
system   includes   a   heater   for  
t

he
a
d
blu

e
® tank.
I
n
 
exceptional   circumstances   (vehicle  
k

ept
 
for
 
a
 
long   period   at   temperatures  
t

hat
 
are
 
constantly   below   -15°C),   an  
e

missions
 
control   system   fault   alert  
m

ay
 
be
 
related   to   freezing   of   the  
a
d
blu

e
® in your vehicle.
P
ark
 
your   vehicle   in   a   warmer   area   for  
a

 
few
 
hours   until   the   additive   becomes  
li

quid
 a

gain.
The
 
emissions   alert   does   not   go   off  
i

mmediately,   it   will   occur   after   several  
m

ile
 
of
 
running.
You
 
have
 
exceeded
 
the
 
authorised
 
d

riving
 
limit:
 
the
 
starting
 
prevention
 
s

ystem
 
inhibits
 
engine
 
starting.
Every time the ignition is switched on, the SERVICE a nd   engine   diagnostic   warning   lamps   come   on   and t

he   UREA   warning   lamp   flashes,   accompanied   by
 a

n   audible   signal   and   the   display   of   the   message
 "

Emissions   fault:   Starting   prevented".
Starting prevented
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.

DS3_en_Chap10_info-pratiques_ed01-2014
Never store bottles of adblue® in
your vehicle.
a

d
blu

e
® freezes at about -11°C and d
eteriorates   above   25°C.   It   is   recommended  
t

hat bottles be stored in a cool area and
protected
  from   direct   sunlight.
Under these conditions, the additive can be
kept
 
for
 
at   least   a   year.
If the additive has frozen, can be used once it
has
 
completely   thawed   out.
Recommendations on storage
Before topping-up, ensure that the vehicle is parked   on   a   flat   and   level   sur face.
In wintry conditions, ensure that the
temperature
  of   the   vehicle   is   above   -11°C.  
O

ther wise,   by   freezing,   the   AdBlue
® cannot
be
 
poured
 
into
 
its
 
tank.
 
Park
 
your
 
vehicle   in   a  
w

armer
 
area
 
for
 
a
 
few
 
hours
 
to
 
allow   the   top-up  
t

o
 
be
 
carried
 
out.
Procedure
F Switch   off   the   ignition   and   remove   the   key.
F
F
or access to the a
dbl
ue
® tank, raise the b
oot
 
carpet
 
then,
 
depending   on   equipment,  
l

ift
 
out
 
the
 
spare
 
wheel
 
and/or   the   storage  
b

ox.
F
 
W

ithout
 
pressing,
 
turn
 
the
  black   cap   a  
q

uarter
 
turn
 
anti-clockwise   and   lift   it   off.
F

T

urn the blue cap a 6
th of a turn anti-
clockwise.
F
 
L

ift
 
off
 
the
 
cap.

201
DS3_en_Chap10_info-pratiques_ed01-2014
Important: if your vehicle's a
dblu e® tank is completely empty - w
hich
 
is
  confirmed   by   the   alert  
m

essages   and   the   impossibility   of  
s

tarting
 
the   engine,   you   must   add   at  
l

east
 
3.8   litres   (so   two   1.89   litre   bottles).If any additive is split or splashed, wash
immediately
  with   cold   water   or   wipe  
w

ith   a   damp   cloth.
If the additive has crystallised, clean it
off   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   signalled   by   the   message   "Top
 u

p   emissions   additive:   Starting   prevented",
 y

ou   must   wait   around   5   minutes   before
 s

witching  
o
n  
t
he  
i
gnition,  
w
ithout opening
the driver's door, locking the vehicle
or introducing the key into the ignition
switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
F
o
b

tain a bottle of a
dbl
ue
®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
a
d
blu

e
® tank. N ever dispose of a
dbl
ue
® additive
bottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 
purpose
 
or
 
take
 
them
  to   your  
d

ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a


6
th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat the indicator on the cap lines up with
the
 
indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
 
the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.
Practical information

213
DS3_en_Chap10_info-pratiques_ed01-2014
F Lower  the   vehicle   fully.
F  F old   the   jack   2   and   detach   it.F
 T ighten   the   security   bolt   (if   your   vehicle   is  f
itted   with   them)   using   the   wheelbrace   1
fitted
  with   the   socket   4.
F
 
T
ighten   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
F
 
R
efit   the   chromed   bolt   covers   on   each   of  
t

he   bolts   (with   alloy   wheels   only).
F
 
S
tore   the   tools   in   the   box.
RaCING tyres
driving in winter conditions
The 215/40 R18 89W tyres fitted as standard are   not   suitable   for   severe   winter   conditions.  
C

ITROËN   recommends   that   you   use   suitable  
w

inter   tyres   during   periods   of   very   cold  
w

eather.
If you want to fit snow chains or anti-
slip covers to your vehicle, contact
a CITR
oË

N dealer for advice on the
tyres
  recommended   for   your   vehicle.
Practical information

DS3_en_Chap10_info-pratiques_ed01-2014
It is strongly recommended that before you   leave,   you   practise   fitting   the   snow  
c

hains   on   a   level   and   dry   sur face.
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.
T he   snow   chains   must   be   fitted   only  
t

o   the   front   wheels.   They   must   never  
b

e fitted to "space-saver" type spare
wheels.
Take
  account   of   the   legislation   in   force  
i

n your country on the use of snow
chains
  and   the   maximum   running  
s

peed
 a
uthorised.
Avoid
  driving   with   snow   chains   on  
r

oads that have been cleared of snow,
to
  avoid   damaging   your   vehicle's   tyres  
a

nd   the   road   sur face.   If   your   vehicle  
i

s   fitted   with   alloy   wheels,   check   that  
n

o   part   of   the   chain   or   its   fixings   is   in  
c

ontact   with   the   wheel   rim.
Advice on installation
F If  you   have   to   fit   the   chains   during   a   journey,   stop   the   vehicle   on   a   flat   sur face   on   the   side   of   the  r
oad.
F
 
A
pply   the   parking   brake   and   position   any   wheel   chocks   to   prevent   movement   of   your   vehicle.
F
 
F
it   the   chains   following   the   instructions   provided   by   the   manufacturer.
F
 
M
ove   off   gently   and   drive   for   a   few   moments,   without   exceeding   30   mph   (50   km/h).
F
 
S
top   your   vehicle   and   check   that   the   snow   chains   are   correctly   tightened.
Use
  only   the   chains   designed   to   be   fitted   to   the   type   of   wheel   fitted   to   your   vehicle:
Vehicle Original
  tyre   sizeMaximum
  link   size.
DS3 185/65
  R159
  mm
195/55
  R16
205/45
  R17not chainable
DS3 R
aC

ING 215/40
  R18not chainable
For
  more   information   on   snow   chains,   contact   a   CITROËN   dealer   or   a   qualified   workshop.

DS3_en_Chap10_info-pratiques_ed01-2014
Changing a fuse
Installing electrical
accessories
Your vehicle's electrical system is designed   to   operate   with   standard   or  
o

ptional
 e
quipment.
Before
  installing   other   electrical  
e

quipment   or   accessories   on   your  
v

ehicle, contact a CITR
oË
N dealer or a
qualified
 w

orkshop.
CITR
oË

N will not accept responsibility
for
  the   cost   incurred   in   repairing   your  
v

ehicle   or   for   rectifying   malfunctions  
r

esulting   from   the   installation   of  
a

ccessories not supplied and not
recommended
  by   CITROËN   and  
n

ot installed in accordance with its
instructions, in particular when the
combined
  consumption   of   all   of   the  
a

dditional   equipment   connected  
e

xceeds
 1
0
 mil
liamperes.
The
 
extraction
 
tweezer
 
and
 
the
 
spare
 
fuse
 
l

ocations
 
are
 
on
 
the
 
back
 
of
 
the
 
dashboard
 
f

usebox
 
cover.
For
 
access
 
to
 
them:
F
 
u

nclip
 
the
 
cover
 
by
 
pulling
 
on
 
the
 
side,
F
 
r

emove
 
the
 
cover
 
completely,
F
 
r

emove
 
the
 
tweezer.
Access to the tools
Before changing a fuse, the cause of the failure m ust   be   identified   and   rectified.
F
 
I
dentify   the   faulty   fuse   by   checking   the  
c

ondition   of   its   filament.
changing a fuse
Good Failed
F
 
U

se
 
the   special   tweezer   to   extract   the   fuse  
f

rom
  its   housing.
F
a
l

ways replace the failed fuse with a fuse
of
 
the   same   rating.
F
 
C

heck   that   the   number   marked   on   the  
b

ox,
  the   rating   marked   on   the   fuse   and   the  
t

ables   below   all   agree.

DS3_en_Chap10_info-pratiques_ed01-2014
Fuse table
Fuse N°Rating Functions
F1 20 AEngine
  control   unit   supply,   cooling   fan   unit   control   relay,   multifunction   engine   control   main   relay,   injection   pump  
(

Diesel).
F2 15 AHorn.
F3 10 AFront
  /   rear   screenwash.
F4 20 ALED
  lamps.
F5 15 ADiesel
  heater   (Diesel),   particle   filter   additive   pump   (Diesel),   air   flow   sensor   (Diesel),   blow-by   heater   and  
e

lectrovalves   (VTi).
F6 10 AABS/ESP
  control   unit,   secondary   stop   switch.
F7 10 AElectric
  power   steering,   automatic   gearbox.
F8 25 AStarter
  control.
F9 10 ASwitching
  and   protection   unit   (Diesel).
F10 30 AFuel
  heater   (Diesel),   blow-by   heater   (Diesel),   fuel   pump   (VTi),   injectors   and   ignition   coils   (petrol).
F11 40 AHeater
 b

lower.