2014 CITROEN DS3 CABRIO DAG light

[x] Cancel search: light

Page 121 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English) 119Visibility
   
 
 
 
 
 
 
 
Interior mood lighting  The dimmed passenger compar tment lighting improves visibility in the vehicle when the lightis poor. 
 
 
Switching on
 At night, the illuminati

Page 125 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English) Fittings
 Component which protects against sunlightfrom the front or the side, also equipped with an
illuminated courtesy mirror.�)With the ignition on, raise the concealingflap; the mirror is lit aut

Page 129 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English) Fittings
   
To remove the shelf: �)unhook the two cords, �)raise the shelf slightly, then unclip it on each side.  
 
 
 
 
 
 
 
Rear parcel shelf 
�) 
 Raise the boot carpet by pulling the strap 
u

Page 148 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English)    
 
 
 
 
 
 
 
 
 
 
Direction indicators 
Selection of the left or right direction indicators 
to signal a change of direction of the vehicle. �)Left: lower the lighting stalk beyond thepoint of r

Page 150 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English)    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Braking assistance systems 
Group of supplementary systems which helpyou to obtain optimum braking in complete safety in emergency situations:
-  anti-lock braking

Page 155 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English) 153Safety
The driver must ensure that passengers usethe seat belts correctly and that they are allrestrained securely before setting off.
  Wherever you are seated in the vehicle, always fasten your s

Page 156 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English)   Airbags 
System designed to maximise the safety of the
occupants (with the exception of the rear centrepassenger) in the event of violent collisions.
The airbags supplement the action of the force-

Page 174 of 384

CITROEN DS3 CABRIO DAG 2014  Handbook (in English) Manual operation
D   disappears and the gears engaged appear in succession in the 
instrument panel. 
   Invalid value during manual operation 
�)Select position M 
 for  sequentialchanging 
of the fo