2014 Citroen C4 navigation

8
INTERIOR


Interior mood lighting
This dimmed lighting of the passenger
compartment improves visibility inside
the vehicle when the light is poor.



111


Electronic gearbox
This system offers driving combining
a fully automatic mode and a manual
mode.



158

Electric parking brake
It combines the functions of auto-
matic application on switching off the
engine and automatic release when
moving off.
Manual application and release re-
mains possible.



150

Audio and communication systems

These systems benefi t from the following
technologies: radio, CD player, USB player,
Bluetooth system, satellite navigation sys-
tem with colour screen, auxiliary sockets.

Radio




289
eMyWay satellite navigation system




235



Massage system
This system provides a lumbar
massage for a period of 60 minutes.
The massage is done in 6 cycles of
10 minutes duration each.



73

11
FAMILIARISATION
ROOF CONSOLES - CENTRE CONSOLES




A.
Rear view mirror.

B.
Emergency call / Warning lamps
display for front passenger's airbag
and seat belt / Assistance call.

C.
Courtesy lamp / Map reading
lamps / Interior mood lighting.

D.
Microphone for audio and telematic
system.

E.
Panoramic sunroof blind control.




1.
Central adjustable air vents.

2.

Monochrome screen and small storage
box with fl ap or colour screen.


3.
Audio system or eMyWay satellite
navigation system.

4.
Central switch panel.

5.
Heating / air conditioning controls.

6.
USB port / auxiliary Jack socket /
12 V accessory socket.

7.
Gear lever, manual or automatic
gearbox.

8.
Manual parking brake

9.
Large open storage or front armrest.

1
MONITORING
30












CUSTOMISABLE COLOUR INSTRUMENT PANEL WITH AUDIO SYSTEM OR NAVIGATION SYSTEM



1.
Rev counter (x 1 000 rpm or tr/min).

2.
Gear shift indicator or gear selector
lever position and gear for an elec-
tronic or automatic gearbox.

3.

Analogue speedometer (mph or km/h).


4.
Cruise control or speed limiter
setting.

5.
Digital speedometer (mph or km/h).

6.
Engine oil level indicator.

A.
Dial COLOUR: customisation of the
background colour of the dials.

B.
Screen COLOUR: customisation
of the background colour of the
screens.

C.
Lighting dimmer (available in night
mode).

D.
Reminder of the servicing information
Reset the service indicator or the
trip mileage recorder.



Dials and screens


7.
Service indicator
(miles or km) then,
total mileage recorder.
These two functions are displayed
successively on switching on the
ignition.
Lighting dimmer setting (when mak-
ing an adjustment).

8.
Trip mileage recorder (miles or km).

9.
Fuel gauge and associated low fuel
level warning lamp.

10.
Range (miles or km).



Control buttons

1
MONITORING
48
In the instrument panel, you can change
the colour of its dials (button A
) indepen-
dently from that of the screens (button B
).
There are fi ve colour variants, from
white to blue.



press the appropriate button as
many times as needed to obtain the
desired colour.
This menu allows you to choose a fam-
ily of polyphonic sounds from the four
available. These sounds are grouped
together in a family and are adapted
to suit the situation and context (alert,
confi rmation, rejection, direction indica-
tors, lighting left on, key in ignition...).






Customising the instrument
panel colours





Customising the polyphonic
sounds

For the customisable colour
instrument panel with audio or
navigation system



Press the "MENU"
button for ac-
cess to the main menu.


Select the "Personalisation-confi -
guration" menu and confi rm.


Select the "Choice of sounds" line
and confi rm.


Select the desired family of sounds
and confi rm.


Save the modifi cations by confi rm-
ing "OK". For safety reasons, the driver
must only carry out these opera-
tion when stationary.

2
MULTIFUNCTION SCREENS
55






















COLOUR SCREEN

From the navigation system control
panel, to select one of the applications:



press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"PHONE"
or "SETUP"
button for
access to the corresponding menu,


turn the dial A
to select a function,
an item in a list,


press button B
to confi rm the selec-
tion,
or


press the "Back"
button to aban-
don the current operation and return
to the previous display.
With repeated presses on the C

"MODE"
button, the screen displays:


- "RADIO / MEDIA" * ,

- "TELEPHONE" * ,

- "FULL SCREEN MAP" * ,

- "MAP IN A WINDOW" * ,

- "TRIP COMPUTER".





Controls
"SETUP" menu





Press the "SETUP"
button to open
the confi guration menu:


- "Sound choice",

- "Display confi guration",

- "Speech synthesis setting".

- "Select language",

- "Defi ne vehicle parameters",

- "Alert log".


For safety reasons, confi gura-
tion of the multifunction screen
by the driver must only be done
when stationary.


Displays in the screen

Depending on the context, it displays
the following information:


- time,

- date,

- altitude,

- ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),

- parking sensor information,

- parking space measurement,

- audio functions,

- directory and telephone informa-
tion,

- satellite navigation system informa-
tion,

- trip computer,

- alert messages,

- settings menus for the screen, the
satellite navigation system and ve-
hicle systems.



*
For more information on these appli-
cations, refer to the "Audio and telem-
atics" section.

2
MULTIFUNCTION SCREENS
56

























Choice of sounds
This menu allows you to choose a
family of polyphonic sounds from four
available. These sounds are grouped
together in a family and are adapted
to suit the situation and context (alert,
confi rmation, rejection, direction indica-
tors, lighting left on, key in ignition...).

Display confi guration
This menu is used to select the col-
our scheme for the screen, adjust the
brightness, set the date and time and
to choose the units for distance (km
or miles), fuel consumption (l/100 km,
mpg or km/l) and temperature (°Celsius
or °Fahrenheit).
Adjusting the voice synthesiser
This menu is used to adjust the volume
setting for navigation instructions and
to choose the type of voice (male or fe-
male).

Adjusting the date and time



- Press on SETUP
.

- Select "Display confi guration" and
confi rm.

- Select "Set date and time and con-
fi rm.
Select "Minute adjustment via GPS" so
that the minutes are adjusted automati-
cally by satellite reception.


- Select the setting to modify. Confi rm
by pressing on OK
, then modify the
setting and confi rm again to save
the modifi cation.

- Adjust the settings one by one.

- Select " OK
" in the screen then con-
fi rm to save the setting.

Choice of language
This menu is used to choose the lan-
guage used by the screen from a de-
fi ned list.

Vehicle parameters
This menu is used to activate or deac-
tivate certain driving and comfort sys-
tems, classifi ed by category:


- "Driver aid":


●
"Electric brake * " (Automatic electric
parking brake; see "Driving" sec-
tion),

●
"Rear wiper" (Rear wiper coupled
to reverse gear; see "Visibility"
section),

●
"Speed limits" (Memorising speed
settings for the cruise control and
speed limiter; see "Driving" sec-
tion).

Alert log
This lists the active alerts by displaying
in turn the different messages associ-
ated with them.


- "Vehicle access" (see "Access" sec-
tion):


●
"Driver doors selectivity" (Se-
lective unlocking of the driver's
door),

●
"Rear doors selectivity" (Selective
unlocking of the boot using the
centre button on the remote con-
trol; see "Access section).



- "Driving lights" (see "Visibility" sec-
tion):


●
"Day lights * " (Daytime running
lamps),

●
"Directional headlights" (Main /
additional directional lighting).



- "Comfort lighting" (see "Visibility"
section):


●
"Welcome lights" (Interior welcome
lighting),

●
"Running lights" (Automatic timed
operation of headlamps).



*
Depending on country.

9
DRIVING
175








MEMORISING SPEEDS

This memorisation of speeds applies
to both the speed limiter and the cruise
control.
You can memorise up to 5 speeds in
the system. By default, a few speeds
are already memorised.



Press the "MEM"
button to display
the list of speeds memorised.



Selection

To select a memorised speed:



press and hold the " +
" or " -
" but-
ton; the system stops at the nearest
memorised speed,


press and hold again the " +
" or " -
"
button to select another memorised
speed.
A reminder of the speed and the state
of the system (on/off) is displayed in the
instrument panel.
For safety reasons, the driver
must only carry out these opera-
tions when stationary.


Go to the main menu by pressing
the "MENU"
button:


Select the "Personalisation-confi -
guration" menu and confi rm.


Select "Vehicle parameters" menu
and confi rm.


Select the "Driving assistance" line
and conform.


Select "Speeds memorised" line
and confi rm.


Modify the speed.


Select " OK
" and confi rm to save the
modifi cations.


With your Audio system
With the eMyWay satellite
navigation system



Go to the main menu by pressing
the left hand thumb wheel at the
bottom of the steering wheel.


Select the "Vehicle parameters"
menu and confi rm.


Select the "Driving assistance" line
and confi rm.


Select the "Speeds memorised" line
and confi rm.


Modify the speed.


Select " OK
" and confi rm to save the
modifi cations.
These operations are only pos-
sible when stationary with this
system.


Access

11
PRACTICAL INFORMATION
215









Charging the battery using a
battery charger
It is advisable to disconnect the
battery if the vehicle is to be left
unused for more than one month.












The batteries contain harmful
substances such as sulphuric
acid and lead. They must be
disposed of in accordance with
regulations and must not, in any
circumstances, be discarded
with household waste.
Take used remote control bat-
teries and vehicle batteries to a
special collection point.



Disconnect the battery from the vehicle.



Follow the instructions for use pro-
vided by the manufacturer of the
charger.


Connect the battery starting with the
negative terminal (-).


Check that the terminals and con-
nectors are clean. If they are covered
with sulphate (whitish or greenish
deposit), remove them and clean
them.

Protect your eyes and face be-
fore handling the battery.
All operations on the battery
must be carried out in a well
ventilated area and away from
naked fl ames and sources of
sparks, so as to avoid the risk of
explosion or fi re.
Do not try to charge a frozen
battery; the battery must fi rst
be thawed out to avoid the risk
of explosion. If the battery has
been frozen, before charging
have it checked by a CITROËN
dealer or a qualifi ed workshop
who will check that the inter-
nal components have not been
damaged and the casing is not
cracked, which could cause a
leak of toxic and corrosive acid.
Do not reverse the polarity and
use only a 12 V charger.
Do not disconnect the terminals
while the engine is running.
Do not charge the batteries with-
out disconnecting the terminals
fi rst.
Wash your hands afterwards.



Reinitialisation after
reconnection

After any reconnection of the battery,
switch on the ignition and wait at least
one minute before starting, to allow
time for the initialisation of the electron-
ic systems.
By referring to the corresponding sec-
tions, you should set or initialise the fol-
lowing systems yourself:


- one-touch electric windows,

- time and date,

- audio and navigation system set-
tings.
Check that no alert message or warn-
ing lamp comes on after switching on
the ignition.
However, if minor problems persist af-
ter carrying out these operations, con-
tact a CITROËN dealer or a qualifi ed
workshop.


Some functions are not available
if the battery is not suffi ciently
charged.









Do not push the vehicle to start
the engine if you have an elec-
tronic or automatic gearbox.
With Stop & Start, the battery
does not have to be disconnect-
ed for charging.