Page 55 of 368
1
53 Monitoring
On the menu screen:
)
press the INFO
button to select "RESET"
(located in menu 2/2 or 3/3 depending
on the instrument panel)
:
Restoring factory settings
(RESET)
You can restore all of the factory settings for all
functions.
)
press and hold the INFO
button for at least
5 seconds
.
There is an audible signal and all of the factory
settings are restored for all functions.
In the menu screen:
)
press the INFO
button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3)
:
Activation / deactivation of the
current fuel consumption *
You can activate or deactivate the display
of the current fuel consumption, with the
type 2 instrument panel only.
)
press and hold the INFO
button for a few
seconds to scroll through the choices in
succession (ON, OFF).
*
Depending on equipment.
In the menu screen:
)
press the INFO
button to select sound 1 or 2
(located in menu 2/3)
:
Selection of the sound
for the direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.
Page 56 of 368
54
Monitoring
Audio-CD system screen
Associated with the Audio- CD system, this
screen can display the following information:
- the time,
- audio system information.
(see the "Audio and telematics" section).
Setting the time
Selecting the adjustment mode
The digital clock can be set in automatic
mode
or in manual mode
.
Manual mode
This mode permits manual setting of the time
using the audio system buttons.
It can also be used when the "Automatic mode"
displays an inaccurate time, when the local
RDS stations are broadcasting from a different
time zone.
Automatic mode
This mode permits automatic setting of the
local time using the signal from RDS stations.
The symbol "CT"
appears in the screen.
Page 57 of 368
1
55
Monitoring
If no action is carried out within
10 seconds, the selection menu closes
automatically. To select the mode:
)
Press the " PWR/VOL
" button to switch on
the audio system.
)
Press the MENU
button.
)
Press the SEL
knob to scroll through
the menus and select " RDS setting -
CT ON - CT OFF
" (clock time).
)
Turn the SEL
knob to the left or to the right
to select "CT OFF"
(manual mode)
or "CT ON"
(automatic mode).
)
Press the SEL
knob to confirm.
The digital clock does not display
seconds.
The time setting is lost if the battery is
disconnected.
Manual adjustment
)
Press the PWR/VOL
button to switch on
the audio system.
)
Press the MENU
button.
)
Press the SEL
knob to run scroll through
the menus and select " Time Setting
Adjust
".
)
Turn the SEL
knob to select " ON
" for
access to time setting.
)
Press the SEL
knob to confirm.
)
Turn the SEL
knob to adjust the time.
)
Press the SEL
knob to confirm.
Page 58 of 368
56
Monitoring
Touch screen Audio-CD system screen
Associated with the touch screen Audio- CD
system, this screen can display:
- the time,
- information related to the audio system.
(See the "Audio and telematics" section).
For reasons of safety, the driver
should only carry out operations that
require close attention with the vehicle
stationary.
Do not use pointed objects on the touch
screen.
Do not touch the screen with wet hands.
Use a clean soft cloth to clean the
screen.
Use the buttons arranged on the screen to
operate the system.
)
Press the MENU
button to display the main
menu.
)
Press " Setting
".
)
Press " System Setting
".
)
Press " Time Setting
".
Setting the time
General operation
1.
CD eject.
2.
System On / Off.
Volume adjustment.
3.
Access to the different menus in the system.
Page 59 of 368
1
57
Monitoring
Display format
You can the display format for the date and
time:
)
Press the MENU
button.
)
Press " Setting
".
)
Press " System Setting
".
)
Press " Time Setting
".
)
Press " Time Display Settings
".
Permanent display
Once the data and time are set, you can
choose to have them always displayed in the
screen. To do this:
)
Press the MENU
button.
)
Press " Setting
".
)
Press " Clock Screen
.
You and then select the format for the display
of the date and time (" Date / Time Format
")
and activate automatic adjustment of the time
(" Clock Time
"). The date and time are displayed.
Simply touch the screen again to return to the
original display.
)
Press " Time Adjustment
".
)
Use the virtual arrows in the screen to
adjust the date and time.
)
Press " Set
" to conform or " Back
" to cancel
and return to the previous screen.
Page 60 of 368
58
Monitoring
Touch screen Audio-Telematic system screen
General operation
Use the buttons on either side of the screen,
or touch the virtual buttons appearing in the
screen to operate the system.
1.
PWR/VOL
: audio system on/off, volume
adjustment.
2.
AUDIO
: display of the last audio source
used.
3.
SEEK TRACK
: change of audio source,
fast for ward / back, automatic frequency
search.
4.
MODE
: selection of an audio source.
5.
OPEN
: access to the CD/DVD player.
6.
SETTINGS
: access to system settings.
7.
INFO
: access to information (calendar,
voice commands...).
8.
NAVI MENU
: access to navigation settings.
9.
FOLDER / TUNE SOUND
: selection of a
folder or search for a radio station.
10.
MAP
: display the map with the location of
the vehicle.
11.
ZOOM
: zoom (in or out) on the map.
12 .
Access to the navigation settings and the
selection of destination.
13.
Day / night mode. Associated with the touch screen Audio-
Telematic system, the screen can display:
- the time,
- information related to the audio and
satellite navigation systems.
(See the "Audio and telematics" section).
Page 61 of 368
1
59
Monitoring
System screen
Once in the " Tu n i n g …
" menu, select " System
"
to modify the time zone, the units, or the
display language (English, Dutch, Swedish,
French, Portuguese, Italian, German, Spanish,
Nor wegian, Flemish or Danish) and adjust
other settings.
"Settings" menu
Press the S
ETTINGS
button on the control
panel to open the menu.
Uses a soft clean cloth to clean the
screen.
Do not use pointed objects on the touch
screen.
Do not touch the screen with wet hands.
For reasons of safety, the driver
should only carry out operations that
require close attention with the vehicle
stationary .
In addition, some functions are not
accessible when driving.
For more information on these menus,
refer to the "Audio and telematics"
section.
Setting the time
The digital clock is set automatically
.
This mode enables the system to set the local
time automatically using the signal from the
RDS stations.
)
On the control panel, press the SETTINGS
button for access to settings.
Page 62 of 368
60
Monitoring
You must deactivate automatic
adjustment (RDS Auto Correct) to
change the time zone and summer time
settings.
1.
Auto / GMT / GMT+1 / GMT+2
:
Select the time zone.
2.
Summer Time
:
Summer time On / Off.
3.
RDS Auto Correct
:
Automatic adjustment On / Off. Once this menu has been selected, you can
access the following functions:
Setting the display format
From the " Time
" menu:
)
press the " Format Change
" button.
)
adjust the display settings.
)
press the " Back
" button to confirm.
)
Press the Back
button to confirm and
return to the previous menu.
)
On the touch screen, press the " System
"
button.
The system settings screen is displayed.
)
Press the "Time"
button.
