2014 CHRYSLER 200 Owners Manual

Page 345 of 516

CHRYSLER 200 2014 1.G Owners Manual WARNING!(Continued)
•Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.
• Always drive with each tire inflated to the recom-
mend

Page 346 of 516

CHRYSLER 200 2014 1.G Owners Manual CAUTION!
After inspecting or adjusting the tire pressure, al-
ways reinstall the valve stem cap. This will prevent
moisture and dirt from entering the valve stem,
which could damage the valve stem.
In

Page 347 of 516

CHRYSLER 200 2014 1.G Owners Manual loading may be required for high-speed vehicle opera-
tion. Refer to your authorized tire dealer or original
equipment vehicle dealer for recommended safe operat-
ing speeds, loading and cold tire inf

Page 348 of 516

CHRYSLER 200 2014 1.G Owners Manual Consult an authorized tire dealer for tire repairs and
additional information.
Damaged Run Flat tires, or Run Flat tires that have
experienced a loss of pressure should be replaced imme-
diately with

Page 349 of 516

CHRYSLER 200 2014 1.G Owners Manual If you need snow tires, select tires equivalent in size and
type to the original equipment tires. Use snow tires only
in sets of four; failure to do so may adversely affect the
safety and handling of

Page 350 of 516

CHRYSLER 200 2014 1.G Owners Manual Spare Tires — If Equipped
NOTE:For vehicles equipped with TIREFIT instead of a
spare tire, please refer to “TIREFIT KIT” in “What To Do
In Emergencies” for further information.
CAUTION!
Beca

Page 351 of 516

CHRYSLER 200 2014 1.G Owners Manual Do not install a wheel cover or attempt to mount a
conventional tire on the compact spare wheel, since the
wheel is designed specifically for the compact spare tire.
Do not install more than one compa

Page 352 of 516

CHRYSLER 200 2014 1.G Owners Manual WARNING!
Limited-use spares are for emergency use only. In-
stallation of this limited-use spare tire affects vehicle
handling. With this tire, do not drive more than the
speed listed on the limit-use