90 Homelink®
Homelink®
Universal remote
control
General information
The Homelink universal remote control can
be programmed with hand-held transmitters
from existing equipment.
You must first program the Homelink ® trans
mitter before you can use the system
~ page 90, Programming the Homelink ®
transmitter.
I n o rder to prog ram the Homelink ® transmit
ter for devices utilizing rolling code, a second pe rson on a ladder who can safely reach the
garage doo r opener motor is recommended.
It is also necessary to locate the "learn" but
ton on your garage door opener motor . Refer
to the operating instructions for the opener,
as the location and color of this button may
vary by manufacturer .
You can still use the original remote control
for the device at any time.
A WARNING
-
- Never use the Homelink® transmitter
with any garage door opener that does
have not the safety stop and reverse fea
ture as requ ired by federa l safety stand
ards. This includes any garage door open
er model manufactured before April 1,
1982.
- A garage door opener which cannot de
tect an object, signa ling the door to stop
and reverse does not meet current feder
al safety standards. Using a garage door
opener without these features increases
risk of serious injury or death.
- For safety reasons never release the
parking brake or start the engine while
anyone is stand ing in front of the vehicle.
- A garage door or an estate gate may
sometimes be set in motion when the
Homelink ® remote control is being pro
grammed. If the device is repeatedly ac- tivated, this can overstrain motor and
damage its e
lectrical components -an
overheated motor is a fire hazard!
- To avoid possib le injuries or property
damage, please always make absolutely
certain that no persons or objects are lo
cated in the range of motion of any
equ ipment being operated.
(!) Tips
- If you would like more information on
Homelink ®, where to purchase the
Homelink ® compatible products, or
would like to purchase the Homelink®
Home Lighting Package, please call toll
free: 1-800-355-3515.
- For Declaration of Compliance to United
States FCC and Industry Canada regula
tions~
page 230.
Programming the Homelink ®
transmitter
The transmitter is programmed in two phas
es. For rolling code transmitters, a third
phase is also necessary.
Fig. 99 Overhead co nsole: Homelink ® keypad
I
'-.. ~0000 - - ,r.;-_ - -
Fig. 100 Fro nt bumper : location of tra nsmi tter unit
Phase 1:
p rogramming the overhead keypad
1. Make sure your vehicle is wit hin operating
range of the remote contro lled garage
door opener .
2. Set the parking brake
q A in General in
formation on page 90 .
3. Turn the ignition on . Do not start the en
gine!
4. Press and hold the two outs ide Home
Link ® buttons
(D and @for approxi
mately 20 seconds until indicator light@
c:!;> fig. 99 begins to flash. Then re lease
both buttons. Do not ho ld the buttons for
longer than 30 seconds .
.,. This procedure only needs to be performed
once . It erases the factory-set default codes
and does not have to be repeated to pro
gram addit ional remote controls .
S . Press and hold the Home Link ® button
(D ,
® or @ until the indicato r light @
starts flashing
slowly . Release the button.
.,. The system will remain in programming
mode for 5 minutes . Co to the front of the
vehicle and proceed with phase 2 .
Phase 2:
programming the bumper mounted trans
mitter
6. Hold the original remote control at a dis
tance between 0 -6 in . (0 -15 cm) from the
bumper below the appropriate headlight
for your vehicle
c:!;> fig. 100 (use the short
est distance possible).
7. A im the remote con trol just below the
driver side headlight.
8. Press and hold the activation button on
the remote control.
.,. May be different in Canada.
If so, press and
re-press (cycle) the act ivation button on your
remote control every two seconds.
9 . The emergency flashers will flash
three
times
(after about 15-60 seconds) when
the programm ing is successful. Release
the butto n on the remote control.
.,. To program more devices, repeat steps 4 to
9.
Homelin k® 91
10. Press and hold the trained Homelink ®
button and observe the indicator light @
qfig. 99.
.,. If the ind icator light is solid/continuous,
programm ing is complete and your device
should activate when you press and release
the trained Homelink ® button .
.,. If the ind icator light blinks rapidly for 2 sec
onds and is then a solid/continuous light,
proceed w ith phase 3 to program a rolling
code device.
Phase 3: rolling code programming
.,. A second person o n a ladder who can safely
reach the garage door opener motor is rec
ommended .
11. Locate the "learn" button on the gar age
door opener motor (re fer to the operating
instructions for the opener, as the loca
tion of t his button may vary by manufac
turer) .
12 . Press and release the learn button on the
garage door opener motor .
.,. Note : once the button is pressed, there are
30 seconds in which to initiate the next
step.
13. On the Home link® keypad inside the vehi
cl e, firmly press and hold the Homelink®
button prev iously programmed in phases
1 and 2 for two seconds and release . Re
peat this sequence
twice.
.,. Some vehicles may require the press/hold/
release sequence up to three times to com
plete the train ing process .
.,. Homelink ® should now activate your rolling
code equipped device.
If the 5 m inute time limit is exceeded, the
emergency flashers will flash one time to in
dicate that the process has been term inated .
In this case, repeat steps 4 through 9.
If the emergency flashers do not flash
three
times (after about lS-60 seconds), program
ming was not successful. In this case, repeat
steps 4 through 9 .
Remote contro l units for garage door openers
in Canada are set to stop transmitting radio
frequency signals after two seconds. This time ..,.
92 Homelin k®
may not be sufficient for the Homelink ® sys
tem to learn the radio frequency signal. Per
form all other steps as described above .
Operating the Homelink ® transmitter
The HomeLink ® transmitter works in the
some manner as the original hondheld re
mote control that come with the system.
Fig. 101 Ove rhead conso le: Home link ® keypad
.,. Press the appropriate programmed button
(D , ® or @) to activate the des ired remote
control funct ion
c::> &, in General informa
tion on page 90.
Reprogramming a single button
A Homelink ® button can be reprogrammed
individually without affecting the other but ton allocations.
Programming the o verhead k eypad
.,. Press the appropriate Homelink ® button un -
t il the indicator light begins flashing slowly .
Programmin g the bumper mounted tran s
m itter
1. H old the original remote control at a dis
tance between
0 -5 in . (0 -13 cm) from the
bumper below the appropriate head light
for your vehicle (use the shortest distance possib le).
2. Aim the remote control just below the
d riv er side headlight .
3 . Press and hold the activation button on
the remote control.
4 . The emergency flashers will flash
th ree
time s
(after about 15-60 seconds) when the p
rogramming is successful. Now re
l ease the button on the remote control.
.,. If the device utilizes a rolling code, please
follow phase 3 of
c::> page 90 , Programming
t he HomeLink ® transmi tter
for rolling code
programm ing .
Th is p ro cedu re will c ause the e xisting pro
gr amm in g on the Homelink ® button to be
era sed!
Erasing the programming of the
Homelink ® transmitter
When you erase the programming , the pro
gramming on all three of the transmitter
channels with be lost!
.,. Perform steps 1 to 4 as described on
c:::;, page 91, Phase 1: programming the over
head keypad .
When completed , the Homelink ® system will
be in the programming mode and is then
r eady to learn the codes fo r remote controlled
devices.
© Tips
- Programmed buttons cannot be erased
ind iv idually .
- For security reasons you are advised to erase the programming of the Home
Link ® system before you se ll your vehicl e .
158 Cleaning and protection
the waste water. In certain areas washing
a car outside of such facilities is not per
mitted.
Caring for vehicles with matte finish
paint
App lies to vehicles: with matte finish paint
Vehicles with ma tte finish poin t require spe
cial core due to the characteris tic s of the
point.
Automatic car washes
You must take the necessary precautions such
as closing the windows before using an auto
matic car wash. See the car wash attendant if
there is special equipment on your vehicle
such as a spoiler or remote control antenna
c:::> CD.
Only use car washes where the vehicle re mains stationary and the washing equipment
moves around the vehicle when washing and
drying .
It is not possible to use car washes
that move the vehicle through the car wash
using a chain
c:::> &,.
Only use car washes that use cloth cleaning
equipment, not brushes .
Washing with pressure washers
When washing your vehicles with a pressure
washer, always follow the operating instruc
tions provided with the pressure washer . This
is especially important in regard to the
pres
sure
and spraying distance. Be sure to keep
enough distance from soft materials such as rubber hoses or insulating material as well as
from the parking system sensors*, which are
located in the front or rear bumper.
Never use
rotary nozzles or high pressure
nozzles.
Washing by hand
T o avoid damaging the paint when washing,
first remove dust and large particles from
your vehicle. Insects , grease spots and finger
prints are best removed with a
special cleaner
for matte finish paint.
Apply the product using a microfiber cloth. To
avoid damaging the paint surface, do not use
too much pressure.
Rinse the vehicle thoroughly with water. Clean
the vehicle starting at the top and working to
ward the bottom using a
neutral shampoo
and a soft microfiber cloth. Stop frequently to
rinse the cloth thoroughly.
Clean the wheels and sill panels last. Use a
clean
sponge on these areas.
Rinse the vehicle thoroughly again and let it
air dry . If there are any water spots, they can
be removed using a
leather cloth.
Clean again with the special cleaner for matte
finish paint
if necessary .
Removing stubborn dirt
Bird droppings or tree sap
are best removed
with plenty of water and a microfiber cloth.
You should rinse off
gasoline residue immedi
ately with plenty of water .
A WARNING
--Wash your vehicle only when the ignition
is switched off to reduce the risk of a
crash .
- To reduce the risk of cutting yourself,
protect your hands and arms from metal
parts with sharp edges when cleaning
the underbody, the inside of the wheel
housings or the wheel covers.
- If washing your vehicle during the win
ter, moisture and ice in the brake system
can affect the vehicle's braking ability.
0 Note
-Do not treat vehicle parts painted with
matte finish paint using polishing mate
rials or hard wax. These products could
cause damage to the appearance or sur
face that cannot be repaired.
- Never use protective wax.
It can destroy
the matte finish effect.
- Do not place any stickers or magnetic
signs on vehicle parts painted with
matte finish paint. The paint could be
230 Consumer Information
malfunctions. Because of the way electronic
components are interconnected with each
other, such malfunctions can also have an ad
verse affect on other systems that are not di
rectly involved. This means that you risk both
a substantial reduction in the operational
safety of your vehicle and an increased wear of
vehicle parts~.&, .
Authorized Audi dealers will perform this
work in a professiona l and competent manner
or, in special cases, refer you to a professional
company that specializes in such mod ifica
tions.
_& WARNING
Improper repairs and modifications can
change the way vehicle systems work and
cause damage to the vehicle and serious
personal injury .
(D Note
If emergency repairs must be performed
elsewhere, have the vehicle examined by
an authorized Audi dealership as soon as
possible.
-
Declaration of Compliance, Telecommu
nication or Electronic Systems
Radio Frequency Devices and Radiocommuni
cation Equipment User Manual Notice.
The manufacturer is not responsible for any
radio or TV interference caused by unauthor
ized modifications to this equipment.
Devices
The following devices each comp ly with FCC
Part 15.19, FCC Part 15.21 and RSS-Gen Issue
1:
-Cell phone package
- El ectronic immob ilizer
- Homelink® universal remote control
- Remote control key
- Tire pressure monitoring system
FCC Part 15.19
T his device complies with part 15 of the FCC
Rules. Operation is subject to the fo llowing
two conditions :
(1) This device may not cause harmful inter
ference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Part 15.21
CAUTION:
Changes or modifications not expressly ap
proved by the party responsible for compli
ance could vo id the user's authority to operate
the equipment.
RSS-Gen Issue 1
Operation is subject to the following two con
ditions:
(1) this device may not cause interference,
and
(2) this device must accept any interfe rence ,
i ncl uding interference that may cause unde
sired operation of the device .
coming home ...... .... ... .. .. .. .... 46
Compass m irror ........ ...... ... ... . 55
Comp liance .. ............. .... .. .. . 230
Consumer I nformation . . . . . . . . . . . 99, 227
Contact ing NHTSA ............ .. .... . 99
Controls and disp lays .... ... .. .. .. .. ... 6
Convertible c hild safety seats .. .. .. .. . 138
Convertible locking retractor
Activating .. .... .. .... ... .. .. .. .. . 142
Deactivating . . . . . . . . . . . . . . . . . . . . . . 143
Using to secure a ch ild safety seat
lAO , 142
Convertible top Emergency operation ...... .. .. .. .. .. 40
Error message . . . . . . . . . . . . . . . . . . . . . 38
General information ......... .... ... 37
Indicator light .............. .... ... 15
M alfunct io n ............. .... .. .... 38
Opening/clos ing .......... .... .. .. .. 37
Re tra cting/extend ing rear w indow . .. .. 39
W ind deflector . ... .... ... .. .. .. .... 39
Coolant system ............. ... ... .. 181
Adding coolant . . . . . . . . . . . . . . . . . . . . 183
Chec king the eng ine coolan t leve l .. .. . 18 2
Cruise control . . . . . . . . . . . . . . . . . . . . . . .
73
Changing speed ................ ... . 74
P resetting your speed ..... .. .. .. .. .. 74
Sw itching off . ... ..... ... .. .. .. .. .. 74
Sw itch ing on ............. .... .. .... 73
War ning/ indica tor lights ... .. .. .. .. .. 19
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Current f uel mileage . . . . . . . . . . . . . . . . . 21
D
Damping
refer to Audi magnetic ride ... .. .. .. .. 75
D ata ...... ... ...... ............. .. 225
Data recorder . . . . . . . . . . . . . . . . . . . . . . 144
D ate display . . . . . . . . . . . . . . . . . . . . . . . . . 9
Daytime running lights ......... .... ... 46
Declaration of compliance Cell phone package ....... .. .. .. .. . 230
Electronic immobili zer ..... .. .. .. .. . 230
H omelink ® universal remote cont rol . . 230
Remote control key ........... ... .. 230
T ire pressure monitor ing system ..... 230
def ... .. .. .. ................. .. .... 10
Inde x 233
Defective light bu lb warning ... ... .. .. . 18
Defrost ing t he windows ............. .. 66
Determining correct load limit .... .. .. 197
Digi tal compass . . . . . . . . . . . . . . . . . . . . . 55
Dimens ions .... ... .. ............... 224
Dimming the rearview mirror .. ... .. .. . 50
D ipst ic k . . . . . . . . . . . . . . . . . . . . . . 178, 179
Distance ... .. .. .. ................. . 21
Doors Emergency locking . .. .. ..... ... .. .. . 33
Driver informat io n system
Menu butto n . . . . . . . . . . . . . . . . . . . . . . 23
Menu display . . . . . . . . . . . . . . . . . . . . . . 22
Open door or fron t lid warn ing ... .. .. . 20
Outside temperature disp lay . . . . . . . . . . 20
Red symbo ls ..... .. . .. .. ..... ... .. . 11
Serv ice interval display . . . . . . . . . . . . . . 24
Setting ..... .. ...... ............. . 24
Sound system display .......... .. .. . 20
Tr ip computer .. .. .. ................ 21
yellow symbols . . . . . . . . . . . . . . . . . . . . . 12
Driver seat
refer to Seating position . . . . . . . . . 94, 95
Driving safely ... .. .. . .. ... .... ... .. . 93
Drivi ng through wate r ... ....... .... . 153
Dry sump lubrication .. ... .... ... .. .. 149
Dupli cate key . .. .. .... ............. . 28
D ust filter . . . . . . . . . . . . . . . . . . . . . . . . . . 64
E
Efficiency program
Memory levels . .. ................. . 21
E lapsed time . . . . . . . . . . . . . . . . . . . . . . . . 21
E lectrical voltage . . . . . . . . . . . . . . . . . . . . 11
E lectronic differential lock (EDL) ... .. .. 144
Warning/ind icator lights .......... .. . 16
E lectronic immob ilizer . . . . . . . . . . . . 10, 29
E lectronic power contro l
EP C war ning/ indicato r light . ... ... .. . 17
E lectronic Stabilization Contro l (ESC) . .. 144
Warning/ind icator lights ........ .. .. . 15
Emergency flashe r ... .. ... ..... ... .. . 48
Warning/ind icator lights ..... ... .. .. . 19
Emergency locking ........ ......... .. 33
Emergency operation Convertib le top ...... ............. . 40
•
•
234 Index
Emergency release
F ro nt lid . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Park ing lock . .. ... .... ... .. .. .... ..
82
Emergency sta rting ...... .. .. .. .. .. . 2 17
Emergency towing ............. .. .. . 219
Energy management .... ... .. .. .... . 150
Battery power . ....... ... .. .. .... . 151
Driver notification . . . . . . . . . . . . . . . . . 151
Eng ine
Coolant ..... .. .. ..... ... .. .. .... .
181
Engine compartment lid ... .. .... .. . 17 2
Starting . . . . . . . . . . . . . . . . . . . . . . 68, 69
Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Eng ine compar tmen t ................ 174
Safety ins truc tions ..... ... .. .. .... . 172
Eng ine compartment lid
C losing .. .. ................ ... ...
17 4
Release lever . ........... .... .... .
172
Eng ine coolant system ............... 181
Malfunct io n .......... .... .... ..... 15
Temperature ga uge .... .... .... ...... 9
Engine data . .... . ...... ... .. .. .... .
225
Eng ine oi l ..... ........... .. .. .... . 175
Adding .. ... ............ .. .. .. .. . 180
Addit ives .... .. .. ..... ... .. .. .... . 180
Chec king the engine oil level . . . . 178, 179
Dry s ump l ubrication . ... .. .. .. .. ... 149
Indications and cond it ions requ iring ex-
tra checking . . . . . . . . . . . . . . . . .
178, 179
O il consumption . ........... .. .. .. . 178
O il grades .. ................ ... ... 175
Specification and viscos ity . . . . . . . . . . . 17 5
T empe ratu re d isp lay ................. 8
Eng ine oil level ............ .. .. .... ..
17
E ng ine oi l pressure (malfunction) ... .. . . 14
E ng ine o il senso r defective ....... ..... 18
Eng ine speed limitat ion ... .. .. .. .. .. .. 1 7
E nvi ro nment
Cat alytic conve rter ........ .. .. .. .. .
153
D isposing of your vehicle battery . . . . . 185
Fu el . .... .. ... .. ..... ... .. .. .... . 169
Unleaded fuel .. .. ..... ... .. .. .... . 167
What should I do with an old battery? 185
EPC
refer to E lectronic powe r control . . . . . . 17
ESC (Electronic Stabilization Cont ro l)
War ning/ indicato r lights ... .. .. .. .. . .
15
Event Data Recorde r (E DR) . . . . . . . . . . . . 14 4
Exhaus t tai l pipes
Cleaning .. .... .. ............. ....
161
Expansion tank ..................... 182
Exterior mirrors
Adjusting . . . . . . . . . . . . . . . . . . . . . . . . .
50
Dimming . ..... .. .. ... ..... ... .. .. . 50
Heating ... .... .. ............. .... . 50
F
Fan ... ... .. .... .. .. ... .. ..... ... .. . 64
Fastening
Boos ter seats .................... .
C o nvertib le child sa fe ty seats ....... .
Infant seats ..... ... .. ..... .... . . .
Flat bed truck
Flat tire Chang ing . .... .. ... .......... ... .
139
138
137
2 20
214
Floor ma ts . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Fold ing master key with remote control . . 28
Folding top
Care and cleaning . . . . . . . . . . . . . . . . . .
159
Foot ped als . .. .. .. ... .......... .... . 98
For the sake of the environment Gasoli ne fumes and t he e nvir onme nt ..
169
Letting your eng ine warm up ....... .. 69
Ref ueling . ...... ............. .... 169
Front a irbags
Description . . . . . . . . . . . . . . . . . . . . . . .
115
How they work ........ ........... . 120
Frontal collis ions and the laws of phys ics 104
Fron t lid
E mergency re le a se .. ........... .. .. . 34
li ght . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
so
Power locking system ... .... ... .. .. . 33
Tr unk escape handle . .. ..... ... .. ..
210
Fron t passenger
refer to Se ating posi tion . . . . . . . . . 94 , 95
Front seats . . . . . . . . . . . . . . . . . . . . . . . . . 57
Child rest raints in the front seat .. .. .. 112
Front towing loop ................... 220
Fuel
Additives . ... .. .. .. .... .... ... .. ..
167
B lended gaso line ... ... ..... ... .. .. 167
C ur rent fuel mileage . .. ..... ... .. .. . 21
Filler neck . ...... ............. .... 168
Fuel supply too low . . . . . . . . . . . . . . . . . 18
Gasoline ... .................. .... 167
Gasoline additives ................. 168
Octane rating ............ .... .. ... 167
Recommendation ......... .. .. .. .. . 167
Refueling .. ................ ... ... 169
Reserve . ... ... .. .. ...... .. .. .. .. .. 10
Tank capacity ............... .... .. 225
Unlocking the fuel filler flap by hand . . 170
Fuel gauge .. ............. .... .. .... 10
F uses
Assignment ................ .... .. 221
Replacing . ................. ... ... 221
G
Garage door opener (Homelink®) ... .. .. 90
Gearshift lever . . . . . . . . . . . . . . . . . . . . . . 77
Gearshift lever (S tronic) Positions . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Generator Warning/indicator lights ............. 14
Glossary of tire and loading terminology 190
Glove compartment ........ .. .. .. .. .. 61
Gross Vehicle Weight Rating (GVWR) .. . 223
H
Headlight
Defective
Headlights .
. .... ......... .... .. .. .. 18
46
Head restraints . . . . . . . . . . . . . . . . . . 59, 96
Adjusting .. .. .............. ... .... 96
H eated
Exterior mirrors .......... .. .. .. .. .. 50
Rear window defogger . . . . . . . . . . . . . . . 67
Seats . ..... .. .............. ... .... 67
Heated washer jets
Wiper and washer system .. .. .. .. .. .. 51
Heating .... . .... ......... .... .. .. .. 63
High beam . . . . . . . . . . . . . . . . . . . . . . 46, 47
High voltage warn ing label .. .. .. .. .. . 223
Hill hold assist Starting on hills .......... .. .. .. .. .. 71
H omelink ® universal remote control . ... 90
Horn ..... ... ...... ............. ... . 6
How many airbags does my vehicle have? 117
Index 235
How often should I check my tire pres-
sures? ....... .. .... ............... 196
•
How safety belt pretens ioners work .. .. 109 •
Hydroplaning . .. .. ................. 199
I
Ignition ..... ..... .. ................ 68
Immobilizer .. .. .. .. .. ........... .. . 10
Important things to do before driving .. . 93
Improperly worn safety belts ......... . 108
Indicator light Airbag system . . . . . . . . . . . . . . . 121,122
Audi magnetic ride .... ........... .. . 19
Convertible top .. .. ................ 15
PASSENGER AIR BAG OFF .......... . 122
Ind icator lights .. ... ................. 11
Red symbols in the center display . .. .. . 11
Yellow symbols in the center display .. . 12
also refer to Warning/indicator lights . . 11
Infant seats ....... ...... .......... 137
Installing child safety seats Safety belts . . . . . . . . . . . . . . . . . . . . . . 140
Instrument cluster and controls ... .. .. .. 8
Instrument panel illumination ......... 49
Instruments and controls General illustration . . . . . . . . . . . . . . . . . . 6
Interior lights ... .. .. ............... . 49
Luggage compartment . . . . . . . . . . . . . . 50
J
Jump-starting . .. .. .... ........... .. 217
K
Key ........... ... .. ..... ........... 28
Battery replacement . . . . . . . . . . . . . . . . 29
Emergency key ... .... ........... .. . 28
Key replacement . . . . . . . . . . . . . . . . . . . 28
Master key . ..... .. ................ 28
Valet key . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Kick-down . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Knee airbags .. .. .. ................. 126
Description .. .. .. ................. 126
How they work ..... .. .. ...... ..... 127
Important safety instructions ........ 128