2014 AUDI Q7 windshield wipers

When the 1111 symbol illuminates, you can al­
ter your driving style to assist the fi lter self­
cleaning process. Drive for approx imately 15
minutes with the selector lever in the S pos i­
tion at a minimum speed of 37 mph (60 km/ h) and an engine speed of approx imately
2,000 RPM . The temperature i ncrease that
will result from th is can burn off the soot in
the filter. The symbol w ill switch off when the
cleaning is successf ul. After a successful
cleaning, there is no need to br ing the car to
an authorized dealer or qualified workshop beca use this is part of normal vehicle opera­
tion .
I f the symbol
II does not switch off, see
your authorized dealer or other qualified
workshop to have the prob lem corrected .
F or mo re informat io n on the d iesel pa rticu­
l ate filter, refer to~
page 233 .
& WARNING ,..__
Always adapt yo ur speed to the current
weather, road and traffic condit ions. You
should never disobey traffic laws in order
to follow driv ing recommendations.
~O Adaptive light defective
Appl ies to vehicles: with adapt ive light
111 adapti ve l ight defe cti ve
When this symbo l Ill illuminates, it means
that adaptive light is defective . Go to an au­
thor ized dealersh ip to have the headlights or
the control unit for the adapt ive lig ht re­
pa ired .
~ Ignition lock malfunction
If the l!)J symbol in the display comes on,
there is a malfunction in the elect ronic igni­
tion lock. An addit ional d river message can be
d isp layed by press ing the
! CHECK I b utton:
Ignitio n lock d efective
.. Drive to an authorized Audi dealer or quali­
fied workshop at your earliest convenience
to have the malfunction corrected.
Dri ver information di spla y 37
'1> Windshield wipers faulty
£~$ Windshield wip er de fecti ve
When this symbol £11 illuminates, it means
t h at the electronics for the winds hield wipers
are defective . Please go to an author ized A udi
dealer or qualified wo rkshop to have t he
winds hield wiper system repaired.

Sun shade
Applies to vehicles: with sun shade
The windows in the rear doors and the rear
window ore each equipped with a sun shade .
Fig. 63 Sun shade p ulled up on a rea r window
Fig . 6 4 Sun shade p ulled up on th e rear lid w in d ow
Sun shade (rear doors )
~ Pull the shade out and hang it in the b racket
on the upper door frame
r=;-, fig. 63 .
Sun sh ade (rear window )
~ Pull the shade out and hang i t in the bracket
on the rear lid frame
c> fig . 64 .
Clear vision 63
Wiper and washer
system
Switching the windshield wipers on
The windshield wiper lever controls both the
windshield wipers and the washer system.
F ig . 65 W inds hield w ipe r leve r
The windshield wiper l ever r=;-, fig. 65 has the
follow ing positions:
Acti vating rain sensor
~ Move the lever up to posit ion (!) .
~ Move switch @up or dow n to ad just the
sensitivity of the rain sensor.
L o w wiper speed
~ Move the lever up to posit ion @.
High w ipe r speed
~ Move the lever up to posit ion @.
One-touch wiping
~ Move the lever to position @ , when you
want to wipe the windshield
briefly .
Automat ic wiper /wa sher
~ Pull the lever to position ® (toward the
s t eer ing whee l) and hold.
~ Release the Lever . The washer stops and the
w ipers keep go ing for about four seconds.
Depending on how long the Lever is held ,
different numbers of wash cycles are per­
formed .
Turning off the w ipe rs
~ Move the lever back to position @ .

64 Clear vis ion
General information
The winds hield wipers and the w indshield
washer system operate only with the ignition
on.
During a temporary stop , e.g . at a t raff ic sig­
na l, the set wipe speed is automatically re­
duced by one stage.
The winds hield washer no zzles a re heated at
l ow temperatures when the ignition is on .
Removing w ate r droplet s
About 5 seconds after the wash cycle is com­
plete, the wiper system performs a single au ­
tomatic wipe cycle to remove any water drop­
l ets that remain on the windshield whi le dr iv ­
ing.
If you would like to deactivate this delayed
wipe cycle wh ile driving, you have to pull the
l eve r to pos ition ® again within 10 seconds
after this wipe cy cle.
Water droplet removal is reactivated after the
ignit ion is switched off and then on again .
Winter position
To speed up de -icing of the w indshield w ipers,
t hey move to the winter posi tion when the ig­
n ition is switched off and at an outside tem­
perature below 39
°F (4 °(). In this posit ion ,
the w indshield wipers are in an area on the
g lass w hich is reached by the a ir vents below
the glass. It is also easier to remove snow and
ice from the wi ndshield wipers in this posi­
tion .
The wipe rs leave the w inte r position, when
the ign ition is swi tc h ed on, if the winds hield
wiper lever is operated or the active rain sen­
sor reacts to moistu re.
Rain sensor
The rain senso r operates on ly in the inte rva l
wiper position . When it sta rts to ra in , the in­
terval wipe r mode is activated automati ca lly.
If the windshie ld w iper lever is in the inte rval
wipe posit ion w ith the ign ition switched off, the ra
in sensor is not activated until ve hicle
sp eed is above 4 mph (6 km/h).
T o red uce the sensi tivi ty of the rain senso r,
the switch @ mus t be moved down . T o in­
crease the sensitivity of the rain sensor, the
switch must be moved up.
T he higher the sensit iv ity se tt ing , the sooner
the windshie ld wipers react to moist ure on
the windshie ld . I nc reased sensitivity is sig­
naled by the windshie ld wipers making a sin­
gle pass over the windshield.
T he rain sensor w iper intervals depend on the
sensitivity setting as well as vehicle speed.
D uring brief stops, wiper motio n will adj ust in
relat ion to the amount o f rain on the w ind­
shield .
A WARNING
-W iper blades are crucial for safe driving!
O nl y when they are i n good co ndit io n are
they able to clear the windows prope rly
to p rov ide uncompromised vis ib ility.
Wo rn o r damaged wipe r blades are a
safety hazard ~
page 67, Replacing
windshield wiper blades!
- T he rain sen so r is only designed to assist
a nd suppor t the driver.
It rem ains enti re­
ly the d river 's responsibility to monitor
outside weathe r conditions and to man­
ually activate the wipe rs as soon as rain
or driz zle reduces visibility through the
windshie ld.
(D Note
In freezing or near freezing conditions:
- Always check that the w iper b lades are
not frozen to the g lass before you turn
the wipe rs on . Loosen a wiper blade
wh ich is frozen in place before operating
the wipers to prevent damage to the
w iper blade or the wiper motor.
- Do not use the w ipers to clear a frosted
w indow. Us ing the wipers as a conven­
ient ice scrape r will destroy the wiper
blades .

-Prior to using a car wash, the windshield
wiper system must be switched
off (lever
in position 0). This helps to prevent unin­
tentional switching on and damage to
the windshield wiper system .
@ Tips
-The windshield wipers are switched off
when the ignition is turned off. Activate
the windshield wipers after the ignition is switched back on by moving the wind­
shield wiper lever to any position.
- Worn or dirty windshield wiper blades
cause smearing which can affect the op­
eration of the rain sensor. Check the con­
dition of your windshield wiper blades
regularly.
- The rain sensor is part of the interval
wiping system. Turning
off the ignition
will also deactivate the rain sensor. To re­
activate the sensor, switch
off the inter­
val wiping function, then switch it back
on again.
- Make sure the washer fluid reservoir in
the engine compartment is topped
off
before going on a long trip. Look up
c:;, page 272 for checking and filling the
washer container.
Rear window wiper
The wiper lever is also used to operate the
rear window wiper and the automatic wiper/
washer function.
Fig. 66 Wiper lever: activati ng th e rear window w iper
and washer
The rear window wiper and the automatic wip­
er/washer functions are activated as follows:
Clear vision 65
Intermittent wiping
.,. Push the wiper lever forward to the first po­
sition @
c:;, fig. 66. The rear window wiper
will wipe the window approx. every four sec­
onds.
Automatic wiper/washer function
.,. Push the wiper lever forward to the second
stop,
position (J) , and hold it there for as
long as you want the rear wiper/washer to
operate.
.,. Release the lever again . the wiper will keep
running for approx. four seconds.
Switching intermittent wiper action off
.,. Pull the lever all the way back to the original
position.
As soon as the reverse gear is engaged and
the front wipers are turned on and operating
at the same time, the rear wiper also turns on
automatically.
A WARNING
Wiper blades are crucial for safe driving!
Only in good condition are they able to
clear the windows properly to provide un­ restricted visibility. Worn or frayed wiper
blades are a safety hazard!
c:;, page 67,
Replacing windshield wiper blades
(D Note
In freezing or near freezing conditions:
- Always check that the wiper blades are
not frozen to the glass before you turn
the wiper on. Loosen a wiper blade which
is frozen in place before operating the
wiper to prevent damage to the wiper
blade or the wiper motor.
- Do not use the wiper to clear a frosted
window . Using the wipers as a conven­
ient ice scraper will destroy the wiper
blades.
-

66 Clear vis ion
Headlight washer system
Ap plies to vehicles: with hea dlig ht washer syste m
The headlight washer system cleans the
headlights .
.. Operate the windshield wiper/washer sys­
tem
q page 63, fig. 65 ® with the head­
lights turned on by holding the lever for lon ­
ger than one second .
The washer jets extend forward out of the
front bumper driven by water pressure to
spray the front headlights with water .
You shou ld inspect the headlights regularly
(for example when refueling) and clean off
any solid dirt or insects from the lenses .
To ensure the system works proper ly in winter,
keep the washer jets free of snow and remove
any ice using a de- ic ing spray.
Service position
The wiper blades can only be changed in the
service position.
.. If the wiper blades are not frozen to the
windshield, bring the windshield wiper lever
to the basic position@¢
page 63 , fig. 65 .
.. Se lect :
I CAR I function button> S ystems *
control button> Windshi eld w ip e rs > S er v­
ice positi on.
Or
.. Se lect :
I CAR ! funct io n button > Car sy stems *
control button > Servicing & checks > Wiper
servic e po sition .
-On -chang ing the windshield w iper b lades
can on ly be done if you bring the wiper a rms
to the se rv ice posi tion. You w ill also avoid
paint damage to t he hood when working on
the wipers in this pos ition.
- Off -the wi ndshield wipe rs a re moved to
their initial pos ition aga in.
(D Note
N ever maneuve r your vehicle with the
front windshield wipe r arms ra ised si nce
they wi ll a utomat ica lly be moved back to the
ir basic position above a speed of 3
mph
(6 km/h) and ca n scratch the hood.
(D Tips
- Yo u can also use the se rv ice posi tion, for
examp le, i f you want to p rotec t the
windshield from icing by using a cover .
- T he service posit ion automatically
switches to
Off when you operate the
w indshield wiper lever, or speed exceeds
3 mph (6 km/h).
Cleaning windshield wiper blades
Clean the windshie ld w iper b lades when they
begin to leave st reaks .
.. Place the windsh ie ld w iper arms in the serv­
ice pos it ion. Refer to ¢
page 66.
.. Lift the wiper arm away from the rear win­
dow .
.. Use a soft cloth and glass cleane r to clean
the wi ndshield wipe r blades.
.&_ WARNING
Dir ty windsh ield wipe r blades can impair
your view. This can lead to accidents.
.

Replacing windshield wiper blades
Wiper blades in good condition help keep the
windshield clear .
®
Fig. 67 Remov ing t he w iper b lades
F ig . 68 Insta lling w iper blades
Removing a wiper blade
.. Bring the windshield wipers to the service
posit ion ¢
page 66.
.. Lift the w iper arm away from the wind­
shield .
.. Squeeze the plastic bracket on the w ind­
shield wiper a rm together on both sides @
¢fig . 67 .
.. Turn the w iper blade away from the wiper
arm.
.. Lift the w iper blade off in the direc tion of
the a rrow @.
Installing wiper blade
.. Pla ce the new wiper b lade in the retainer on
the wiper arm © ¢
fig. 68 .
.. Swing the wipe r blade in the d irection of the
arrow @ agai nst the wiper arm .
.. Squeeze the corrugation on the wiper until
you hear the b racket click in the w iper arm .
.. Place the wiper arm back against the wind­
shield .
Clear vi sion 6 7
If the wiper blades begin to streak the wind ­
shield, this cou ld be caused by residue left on
the windshie ld by automatic car washes .
Fill the w indshield washe r containe r with a
special solution avai lab le at your authorized
Audi dealer to remove the resid ue.
A WARNING
For your safety, you shou ld rep lace the
wiper b lades once or twice a year. See your
authorized Audi dealer for replacement b lades.
(D Note
- The windshie ld w iper blades must only
be replaced when in the service pos ition
¢
page 66! Otherw ise, you risk damag­
ing the paint on the hood or the wind­
shield wiper mo to r.
- To help p revent damage to the w iper sys­
tem, always loosen blades wh ic h are fro­
zen to the windshield before operating
w ipers.
- T o help p revent damage to wiper blades ,
do not use gaso line, kerosene, paint
t hinne r, or ot her so lven ts on o r near the
w iper blades .
- T o help p revent da mage to the w iper
arms or o ther comp onents, do not at­
t empt to move t he wipe rs by h and.
© Tips
Commerc ial hot waxes applie d by auto­
m atic car washes affe ct the clea na bility of
the w indshield.

When you are driving at higher speeds wit h
the windshield wipers on, the brake pads will briefly touch the brake d iscs in regular inter­
vals so as to improve reaction t ime when brak­
ing on wet surfaces. You, the driver, will not
notice anything .
The effectiveness of the brakes can be reduced
when the vehicle is driven on a salt-covered
road and the brakes are not used . Here too,
you should clean
off accumulated salt coat ing
from brake discs and pads with a few careful
applications of the brake ¢ & .
Cor ro sion
There may be a tendency for dirt to build up
on the brake pads and corrosion to form on
the discs if the car is not dr iven regularly or
only for sho rt trips with little use of the
b rakes .
If the brakes are not used frequently, or if cor­ rosion has formed on the discs, it is advisable
to clean
off the pads and discs by b rak ing
fi rm ly a few times from a mode rately h igh
speed ¢.& .
Faults in the brake system
If you should notice a sudden increase in
brake peda l travel, t hen one of the two brake
circu its may have failed¢& .
Low brake flu id le vel
Malfunct ions can occur in the brake system if
the brake fl uid level is too low . T he brake fluid
level is monitored electronically .
Brake booste r
The brake booster increases the pressure t hat
you generate w ith the bra ke pedal. It on ly op­
erates while the eng ine is running¢ &.
Brake lining wear statu s
Brake lining wea r may be c hecked by vis ual in­
spection of the condition of the brake pads
through the openings in the whee l. If neces ­
sary, the whee l may be removed for this in­
spection ¢
page 297, Changing a wheel.
Intellig ent technolog y 22 7
A WARNING
-You should perform braking maneuvers
for the purpose of cleaning the brake
system only if road conditions permit.
Othe r road use rs must not be put at risk -
you may ca use an accident!
- Before descend ing a steep grade, reduce
speed a nd s hift transmission into a lower
gea r o r l ower dr iving range. Do not ride
the br akes or ho ld t he pedal down too
long o r too often. This could cause the
brakes to get hot and diminish braking
efficiency .
- Do not " ride the brakes" by rest ing you r
foot on the pedal when you do not intend
to brake. This may ca use the brakes to
overheat, premature wear and increased
stopping distance .
- Under certain cl imatic and ope rat ing
conditions such as passing thro ugh wa­
ter , dr iv ing in heavy rain o r after washing
the vehicle , the effectiveness of the
brakes can be reduced . In winte r, ice can
accumu late on the bra ke pads, lin ings,
d iscs a nd drum s. Carefu lly app ly bra ke s
for a test. Brakes w ill dry and ice co at­
ings w ill be cleaned
off after a few care­
fu l brake applicat ions.
- Driving for an exten ded period o f time o n
salt -cove red roads without using your
brakes can a lso affect braking efficiency .
C lean
off accum ulated salt coating from
brake discs and pads with a few careful
brake applications.
- I f you damage the front spoiler, o r if you
install a different spoiler, be sure the air
f low to the front brakes is not obstruct­
ed. Otherw ise the brak e system could
overheat reducing the effectiveness of
the entire brake system.
- Failure of one b rake circuit will impai r
the braking capab ility result ing in an in­
creased s topping distance. Avoid driving
the vehicle a nd have it towed to the ne ar­
est a uthorized Audi dea le r or qu alified
wo rkshop.
•
•

Where are lower anchorages located? ... 218
Where can I find the tire pressu res for my
car? ...... ................... .. ... 279
W hy safety belts? . . . . . . . . . . . . . . 174, 175
W indows
C leaning/remov ing ice .. ... .. .. .. .. . 246
Conve nience close/open feat ure ... .. .. 53
Defogging . . . . . . . . . . . . . . . . . . . . . . . . . 95
Defrosting . ............. .... .. .. .. 95
Rapid defrosting/defogg ing .. .. .. .. .. 97
Windshield was her fluid
L ow level ... .... ...... ... .. .. .. .... 35
W indshield w ipe rs
C hanging the rear w iper b lade . . . . . . . . 6 8
C leaning ... .... ...... ... .. .. .. .... 66
F au lty ... .. .. .... .. .... ... .. .. .... 37
Intermittent wiping .... ... .. .. .. .. .. 63
One -tap wiping ........... .. .. .. .... 63
Ra in sensor . ............. .... .. .... 63
Rear window w iper ........ .. .. .. .. .. 65
Service pos it ion . . . . . . . . . . . . . . . . . . . . 66
Washer rese rvoir .... ..... .. .. .. .. . 272
W inter operation
Battery .. .. ............. .... .. ... 268
Car washes . ............. .... .. ... 244
Coolant system ............. .... .. 264
H eated front seats . ....... .. .. .. .. . 10 1
H eated rear seats ............ .. .... 102
R emov ing ice from w indows .. .. .. .. . 24 6
S teer ing whee l he ating .... .. .. .. .. . 102
Tires . ..... .. ... .. ..... ... .. .. ... 228
W inte r tires ..... ....... .... ... ... .. 288
A ll-wheel drive .............. ... ... 288
W iper blades
Instal ling new wiper blades .. .. .. .. .. 67
also refer to W indshield wipers . . . 67, 68
X
Xenon-Lights . ............. .... .. ... 305
y
Yellow symbols . . . . . . . . . . . . . . . . . . . . . . 34
Inde x 335
•
•