2014 AUDI Q7 garage door opener

Homelink
Universal remote
control
Description
Applies to vehicles: with Home link
The HomeLink universal remote control can
be programmed with the remote control for
devices that are already present.
With Home Link, you can control devices such
as the garage door, security systems, house
lights , etc. comfortably from the inside of you
vehicle.
Homelink makes it possible for you to rep lace
three different remote controls from devices
in your home with one universal remote. This
feature works for most garage door and exte­
rior door motor signals. Programming the in­
dividual remote control for your remote con ­
trol takes place on the left side of the front bumper. There is a control module attached at
this location .
A one-time programming of the sensor must be performed before you are able to use sys­
tems with Homelink. If the system does not activate after performing the one-time pro­
gramming, check whether the system uses a rolling code
¢ page 163 .
A WARNING
-Never use the Homelink transmitter
with any garage door opener that does
have not the safety stop and reverse fea­
ture as required by federa l safety stand­
ards. This includes any garage door open­
er model manufactured before April 1,
1982.
- A garage door opener which cannot de­
tect an object, signaling the door to stop
and reverse does not meet current feder­
al safety standards . Using a garage door
opener without these features increases
risk of serious injury or death.
Homelink 161
- For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle .
- A garage door or an estate gate may
sometimes be set in motion when the
Homelink remote control is being pro­
grammed. If the device is repeatedly ac­
tivated, th is can overstrain motor and
damage its electrical components - an
overheated mo to r i s a fire hazard!
- To avoid possib le injuries or property
damage, please always make abso lutely
certa in that no persons or objects are lo­
cated in the range of motion of any
equipment being operated.
(0 Tips
- If you would like more information on
Homelink, where to purchase the Home­
Link compat ible products, or would like
to purchase the Home Link Home Light­
ing Package, please call toll-free :
1-800-355-3515.
- For Declaration of Compliance to United
States FCC and Industry Canada regula­
tions
¢page 319.
-For security reasons, we recommend that
you clear the programmed buttons be­
fore selling the vehicle.
Operation
App lies to vehicles : with Homeli nk
111111 111111
-
Fig. 191 Headl iner: controls
Req uirement: The buttons must be program­
med
<:!)page 162.

162 Homelink
• To open the garage door, press the p rogram­
med button . The LED @will light up or
flash.
• To close the garage door, pre ss the button
again.
@ Tips
To open the garage door, press the button,
but do not press it for longer ten seconds
or the Homelink module will switch to
programming mode.
Programming the transmitter
Applies to vehicles: with Home link
F ig . 192 Dis ta n ce between t he b umper an d th e hand
t ransm itter
Programming: phase 1 on th e control unit
1. Sw itch on the ignit ion (do not start the
engine) .
2. Pr ess and hold both of the outer Home­
L ink bu ttons
~ page 161, fig. 191 unt il
the L ED @ turns off comple tely (abo ut
20
seconds). Th is procedure clears the stand­
ard codes that were set at the facto ry a nd
does
not need to be repeated again to
program the other buttons .
3. Briefly press the Homelink bu tton th at
you would like to program .
4. Wait unti l the LED @beg ins to blink
q ui ck ly. The Homelink modu le w ill now
r emai n in learning mode for
5 minu tes.
5 . Now s tand in fron t of yo ur vehicle wi th
the orig inal hand t ransmit ter for the ga ­
r age door opener or for the device that
you would l ike to allocate to the Home­
Link button.
Programming: phase 2 on the bumper
6. Hold t he or iginal hand transm itter to­
war ds the left headlight and the radiator
gr ille ~
fig. 192 .
7. Now activate (press) the hand transmit­
ter.
8. Pay attention to the turn signa ls for your
vehicle when activating the hand trans­ mitter . If the eme rgency flashers blink
three t imes, the programmi ng was suc­
cessf ul. If the e mergency flashe r on ly
b links one time, the
5 m in ute time lim it
f or the adap tation has expired or the pro ­
gramming was unsuccessful. Repeat the
programming from step
3 on the controls
o r select another distance from the
bumpe r.
9. If the garage door or other dev ices st ill
fail to be activated w it h the Home Link
control buttons after prog ramming is
comple ted, it is possib le that these sys­
tems might be wor king wi th a rolling code
i ns tead of the n ormal fixed code.
A Roll­
ing code programming m ust be per­
f ormed
~ page 163 .
Progra m the remaining two buttons ac cord ing
to t he inst ructions ment io ned a bove. Beg in
s imilarly w ith the 3rd step if the program ­
ming connec tion was successful for the firs t
button.
Remote con tro l units for garage do or ope ners
in Canada are set to stop transmi tting radio
frequency signa ls after two seconds. This time
may not be suffic ie nt for the Homelink sys­
tem to learn the radio frequency signa l. Per­
form all other steps as desc ribed above.
Erasing the buttons
• Switch on the ignition (do not s tart the en­
gine).
• Press and hold both of the outer buttons un ­
til the LED @turns off completely (abo ut
20 seconds) to erase a ll of the buttons si­
mu lt aneously .
• Prog rammed buttons ca nnot be erased ind i­
vidually . Reprogram the buttons if necessa-
ry .
II>

Reprogramming the buttons
"' Switch on the ignition (do not start the en­
gine).
"'To reprogram an individual button, press
and hold the button until the LED@starts
to flash quickly (after about ten seconds).
Release the button immediately. The Home­
Link module will now remain in learning
mode for 5 minutes.
"'Continue with step 5 .
@ Tips
- The required distance between the hand
transmitter and the Homelink module in
the bumper ¢
fig. 192 depends on the
system that you are programming .
- Depending on the model of the garage
door opener, you may need to release the
button on the remote and press it again
when programming. When program­
ming a new device, keep the button
pressed for at least 15 seconds before
trying again with the transmitter in a dif­
ferent position. Watch out for the emer­
gency flasher during that time.
Programming the rolling code
App lies to vehicles: with Home link
Additionally, a rolling code programming for
the Homelink universal remo te control is re­
quired for some systems.
Identifying the rolling code
"'Press the previously programmed Homelink
button again and hold it down .
"' Look at the LE D @ ¢
page 161, fig. 191 . If
the LED blinks quickly, the features, such as
the garage door opener, are equipped wi th
the rolling code .
"'Program the rolling code as follows:
Activating the garage door opener motor
unit "'Locate the setting button on the garage
door opener motor unit . The exact location
and color of the button may vary depending
on the garage door opener manufacturer .
Homelink 163
"' Press the setting button on the garage door
opener motor unit (usually this will activate
a "setting light display" on the motor unit).
Now you will have about 30 seconds time to
perform the Homelink button programming
on the controls .
Programming on the controls
"'Press the Home link button that was already
programmed and hold for two seconds.
"'To end rolling code programming, press and
hold the Homelink button for two seconds
again.
"'The Homelink button may need to be press­
ed a third time to end the adjustment proce­
dure for some garage door openers .
After the controls have been programmed, the
garage door opener should recognize the HomeLink signal and operate when the Home­
Link button is pressed. Now you may program
the other buttons as needed.
@ Tips
- Programming the rolling code can be
performed quicker and more easily with
the help of a second person.
- If difficulties should arise when pro­
gramming the rolling code, consult the
operating instructions for the garage
door opener or other devices for possible
solutions.

_______________________________ ___:I~n ~d ~e:.::x 327
Fuel gauge .... ... ...... ... .. .. .... 12
Gasoline ... ................ ... ... 249
Gasoline additives ....... .... ... .. . 250
Low fuel level . . . . . . . . . . . . . . . . . . 12, 35
Octane rating ............ .... .. ... 249
Recommendation .............. .... 249
Refuelling .. ... .. .. ...... .. .. .. .. . 252
Reserve .. ............ ...... .... ... 12
Tank capacity ............ .. .. .. .. . 315
Un loc kin g the fue l filler flap by hand . . 254
Fue l economy messages (efficiency pro-
gram) . .. .. .. .. ........ ... .. ... ... .. 27
Fuse arrangement ............ ... .. . 302
G
Garage door opener (Homelink) . ... .. . 16 1
Gas discharge lamps ........... .... .. 305
Gauges Engine coolant temperature .. .. .. .. .. 10
Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . 12
Speedometer . .............. ... ... . 12
Tachometer . . . . . . . . . . . . . . . . . . . . . . . 11
Trip odometer . . . . . . . . . . . . . . . . . . . . . 12
General illustration Instruments and controls . . . . . . . . . . . . . 8
General rules and driving tips .... .. .. . 237
Before driving off road ........ ... .. . 23 7
Driving offroad ........... .. .. .. .. . 237
Glossary of t ire and loading te rmino logy 274
Glove compartment . . . . . . . . . . . . . . . . . . 89
Cooling box . . . . . . . . . . . . . . . . . . . . . . . . 89
Va let key function ............... ... 41
Glove compartment - emergency unlock-
ing ... .. .. .. .. .. ........... .. .. .. .. 89
Glow plug system Indicator light .............. ... .. .. 15
Gradient angle ... ......... .... .. .. . 237
Gross Vehicle Weight Rating (GVWR) .. . 313
Ground clearance 237
H
Headlights .. .... ......... .... .. .. .. 57
Adapt ive light ............ .. .. .. .. .. 59
C leaning ... .. .............. ... ... 245
Defective .. .. .............. ... .... 23
Fr ont fog lights . . . . . . . . . . . . . . . . . . . . 58 Headlight range control
............. 36
Switching off .. .. .. .............. .. 57
Switching on ... .. .. ................ 57
Washer system . . . . . . . . . . . . . . . . . . . . . 66
Xenon headlights . . . . . . . . . . . . . . . . . . . 5 7
Headlight washer reservoir ......... .. 272
Head restraints .. ... ............... . 167
Adjust ing . .. .. .. ... .. .......... .. 16 7
Front seats . . . . . . . . . . . . . . . . . . . . . . . . 77
Rear seats . .. .. .. .. . ... ........... . 78
Heated Exterior mirrors . . . . . . . . . . . . . . . . . . . . 68
Front seats .. .. .. .. .. .... ....... .. 101
Rear seats . .. .. .. .. .. ........... .. 102
Rear seats (four-zone automat ic comfort
air conditioning) .. .. .............. . 102
Steering wheel ..... .............. . 102
Washer je ts . . . . . . . . . . . . . . . . . . . . . . . 63
Heating Climate controls .. .... ......... .. .. . 92
Heavy clothing and safety belts ........ 177
High beam... ..... .............. 57 , 60
Warning/ind icator lights . ....... .. .. . 18
High voltage warning label ....... .. .. 313
Hill descent control . . . . . . . . . . . . 140, 225
Hill ho ld
Starting on hills .... .............. . 110
Homelink (remote control)
Hood Opening 161
25 7
Release lever .. .. .. . .. ... ... ...... 257
Horn ........ .. .. .... ............. .. 8
How are child restraint system anchors re-
lated to child safety .... ...... ....... 217
How many a irbags does my vehicle have? 190
How often should I ch eck my tire pres-
sures? 280
How safety belt pretens ioners work .. .. 181
Hydroplaning ....... .......... ..... 284
I
Ignition key . .. .. .. ... ..... ....... .. 105
Ignition lock . ....... ............... 105
Malfunction . . . . . . . . . . . . . . . . . . . 34, 37
Ign it ion lock posit ions .......... .... . 105
Important things to do before driving .. 164
•
•