2014 AUDI Q5 service

56 Clear vis ion
Wiper servi ce po sition /blade rep lacem ent
po sit ion
• Switch the ignition
off and move the wind­
shield wiper lever to position @¢
page 54,
fig. 53. The windshield wipers move into the
service position.
• To bring the wipers back into the original
pos ition, switch the ignition on and press
the windshie ld wiper lever.
You can also turn the service position on or off
in the radio or
MMI*:
• Switch the w indshield wipers off (posit ion
@ ¢page 54, fig. 53).
• Se lect : I CAR I funct ion button> Wind shi eld
wiper s > Se rvice positio n > On/Off .
Or
• Se lect :
I CAR I function button> Car sys te m s*
control button > Servicing & check s > W iper
s e rv ic e po sition > On/ Off .
Removing the wip er blade
• Lift the windshie ld wiper arm up from the
windshield .
• Press the locking knob@~
fig. 55 on the
wiper blade. Hold the wiper blade firm ly.
• Remove the wiper blade in the direction of
the arrow.
Attach ing th e wiper bl ade
• Inse rt the new wiper blade into the moun t
on the w iper arm @until you hear it latch
into place.
• Place the wiper arm back on the windshield.
• Turn the service position
off.
A WARNING
-
For your safety, you should replace the
w iper blades once or tw ice a year. See your
author ized Audi dealer for rep lacement
blades.
(D Note
- The windshield wiper blades must only
be replaced when in the service position!
Otherwise, yo u risk damaging the paint
on the hood or the w indshield wiper mo­
tor. -
You should not
move your veh icle or
press the windshield wiper lever when
the wiper arms are folded away from the
windshield. The windshie ld wipers wou ld
move back into their original position
and could damage the hood and wind­
shield.
- To help prevent damage to the wiper sys­
tem, always loosen blades wh ich are fro­
zen to the windshield before operating
w ipers.
- To help prevent damage to wiper blades,
do not use gaso line, kerosene, paint
t hinner, or o ther solven ts on o r near the
w iper blades.
- To help prevent damage to the wiper
arms o r other components, do not at­
tempt to
move t he wipe rs by hand.
© Tips
- Commercial hot waxes applied by auto­
matic car washes affec t the how easily
the glass surfa ce ca n be cleaned.
- Yo u can also use the se rvice position, for
examp le, if yo u want to protect the
w indshield from icing by us ing a
cover.
Replacing the rear wiper blade
&:
F ig . 56 Rear wiper: Removing t he wipe r blade
Removing the wiper blade
• Fold the windshie ld wiper arm away from
the windshield .
• Pull the w iper blade and holder out of the
mount.
Attaching the wipe r blade
g
8 rr. ., II)
• Press the wiper blade holder in the arrow di-
rection ~
fig. 56 into the mount. ..,.

Warm and cold Climate control
Description
The climate control system warms, cools and
adds humidity to the a ir in the veh icle inter io r.
It is the most effect ive when the windows and
panoramic sliding sunroo f* are closed . If
there is a build-up of heat inside the vehicle,
venti lation can help to speed up the cooling
process.
I n all heating mode f unctions except
defrost,
the blower on ly switches to a higher speed
once the engine coolant has reached a certain
temperature.
Condensation from the cooling system can
drip and form a puddle of water under the ve­hicle. This is normal and does not mean there
is a leak.
Pollutant filter
The po llutant filte r removes po llutants s uch
as dust and pollen from the air.
The air pollutants filte r must be changed at
the in tervals specified in you r Wa rranty
&
Main tenance book let, so tha t the air condi­
tioner can properly work.
I f you drive you r vehicle in an area with h igh
a ir po llution, the fi lter may need to be
ch anged more freq uent ly than specified in
your Aud i Warranty
& Ma intenance booklet. If
i n doubt, ask your authorized A udi Service Ad­
visor for advice .
K ey coded settings
The climate con trol settings are automat ically
stored and assigned to the remote cont ro l key
that is in use .
& WARNING
Reduced visibility is dangero us and can
cause accidents . -
Warm and cold 79
-For safe driving it is very important that
all windows be free of ice, snow and con­
densat ion.
- Comp letely fam iliarize yourse lf with the
proper use and funct ion of the heat ing
and ve nti lation system and especially
how to defog and defrost the w indows.
- Never use the windshield wiper/washer
system in freez ing weather unt il you
have warmed the w indshield first, using
the heating and ventilation system. The
washer sol ution may free ze o n the wind­
shie ld and red uce visib ility.
(D Note
- If you suspect that the air conditioner has been damaged, switch the system
off to avoid furt her damage and have it
i n spected by a q ua lified dea lership.
- Repairs to the Audi air conditioner re­
quire specia l techni cal know ledge and
speci al tools. Contact an autho rized Aud i
dealer fo r ass istance.
@ For the sake of the environment
B y reduci ng the amou nt of f uel you use,
you also red uce the amount of pollutan ts
emitted in to the air.
(D Tips
- Keep the air intake s lots ( in fro nt of the
w indshield) free from ice, snow and de­
br is in order to maintai n the proper f unc ­
tion of the climate control system.
- T he energy management system may
switch the seat heating* or rear window
defroster off temporar i Ly . These systems
are available again as soon as the energy
balance has been restored.
- The air flowing out of the vents and
throughout the vehicle's entire interior is
discharged at the rear of the ve hicle.
Make sure that the outlet slots are not
covered by clothing, etc.

Hybrid
Hybrid drive
Introduction
Applies to vehicles: with hybri d dr ive
General information
The hybrid drive is a combined drive concept
that automat ically switches between combus­
tion engine and e lectric dr ive types or com­
b ines them.
All work on h igh voltage systems is intended
only for high voltage technicians and may only
be performed by authorized service facilities
in accordance with Audi regulations.
The high voltage system is composed of the
following h igh voltage components : the high
voltage battery, the power electronics, the
e lectric motor, the high voltage A/C compres­
sor and the orange high voltage wiring.
High voltage battery
The high voltage battery is located in the lug­
gage compartment underneath the cargo
floor. You do not need to perform any mainte­
nance work on the high voltage battery . Addi ­
tional information about the high voltage bat­
tery can be found under
r=> page 105.
The high voltage battery serv ice plug is a lso
found underneath an orange cover under the
cargo floor. The service plug is provided on ly
for use by service personnel and must not be
removed by others who are not trained to use
it .
A WARNING
The voltage in the high voltage system is
life-threatening. Touching a damaged high
voltage component can result in a fatal
electric shock. The components in the high
voltage system are marked with a warn ing
label which warns against the high volt­
age.
- Never perform work on orange high volt­
age cables or on high voltage compo­
nents . On ly authorized repair facilities
Hybr id 97
that are certified may perform work on
the high voltage system.
- Never open or remove the service plug
cover in the center of the cargo floor.
- Never damage, alter or remove the or­
ange high voltage cable or disconnect it
from the high voltage system.
- Audi regulations must be followed dur­
ing all work performed on the high volt­
age system and high voltage compo­ nents.
A WARNING
While in electric drive mode, the vehicle
produces considerably less idling, driving
and operat ing noise than when the com­
bustion engine is running. This may make
it difficult or impossible for others such as
pedestrians and children to hear and no­
tice the vehicle when it is in electrical drive
mode. This can lead to co llisions and inju­
ries, for examp le in low traffic areas, when
maneuvering or when driving in reverse.
A WARNING
-
-
Never leave the vehicle unattended while
in the drive ready mode. The vehicle could
begin moving if the accelerator pedal is
pressed, even if the combustion engine is
switched off . This may cause collisions and
severe or fata l injuries. When the vehicle
enters drive ready mode, the status mes­
sage
ybr I P cl, appears briefly in the in­
strument cluster disp lay and the needle in
the power meter points to
READY
r=> page98 .
-When exiting the vehicle, make sure the
selector lever is in the P position, the ig­
nition is switched off and the hybrid sys­
tem is deactivated .
(D Note
-The high voltage system can be damaged
if the vehicle underbody comes into con­
tact with the ground . Immediate ly drive
your vehicle to an authorized repair fa­ cility and have it inspected.

108 Audi adaptive cruise control and braking guard
confirmed by the video camera, an acute
collision warning.
- For safety reasons, do not use adaptive
cruise control when driving on roads with
many curves, when the road surface is in
poor condition and/or in bad weather
(such as ice, fog, gravel, heavy rain and
hydroplan ing). Using the system under
these conditions could result in a colli­
sion.
- Switch adaptive cruise control off tempo­
rar ily when driv ing in turning lanes, on
expressway exits or in construc tion
zones. This prevents the vehicle from ac­
celerating to the set speed when in these
situations.
- Th e adaptive cruise control system w ill
not brake by itse lf if you put your foot on
the accelerator pedal. Doing so can over­
ride the speed and distance regulation.
- When approaching stationary objects
such as stopped traffic, adaptive cruise
control will not respond and braking
guard w ill have limited function.
- The adaptive cr uise control system and
braking guard do not react to people, an­
ima ls, objects crossing the road or on­
coming objects .
- The function of the radar sensor can be
affected by reflective objects such as
guard rails, the entrance to a tunnel,
heavy rain or ice.
- Never follow a vehicle so closely that you cannot stop your vehicle safely. The
adaptive cruise control cannot slow or
brake the vehicle safely when you follow
ano ther vehicle too closely . Always re­
member that the automatic braking
function cannot bring the vehicle to a sudden or emergency stop under these
conditions.
- To prevent unintended operation, always
switch adaptive cruise control off when it
is not being used.
QJ Note
The sensor can be disp laced by impacts o r
damage to the bumper, whee l housing and underbody.
That could affect the adaptive
cruise control system and braking guard. Have yo ur authorized Aud i dea ler or a u­
thorized Audi Service Facility check their
function.
In curves
Applies to vehicles: with Audi adaptive cruise contro l
Fig. 114 Examp le: driv ing into a curve
When driving into a curve¢ fig. 114 and out
of a curve, the adaptive cruise control may re­
act to a vehicle in the next lane and app ly the
brakes. You can override or prevent the brak­
ing by pressing the accelerator pedal briefly.
' Stationary objects
Applies to vehicles: with Aud i adapt ive cru ise contro l
Fig. 115 Example: object changing lanes and station­
a ry object
T he adaptive cru ise control system only reacts
to objects that are moving or that the system
has a lready detected as moving. For examp le,
if a vehi cle@ , which has al ready been detect­
ed by the adaptive cruise control, turns or
changes lanes and another stationary vehicle
® is located in front of that vehicle, the sys­
tem will not react to the stat ionary veh icle.

@ Tips
-Side assist is not active whi le you are
making the adjustment.
- Your settings are automatically stored
and assigned to the remote control key
being used.
Driver messages
App lies to vehicles: with Audi side assist
If side ass ist switches off by itself, the LED in
the button turns off and a message will ap­
pear in the instrument cluster d isplay:
Aud i side assist unavail able: S en sors
blocked
The radar sensors' vision is affected . Do not
cover the area in front of the senso rs with bike
wheels, st ickers, dirt or other objects . Clean
the area in front of the sensors, if necessary
~page 117, fig. 127.
Aud i side assis t: Currently un avail able
Side assist cannot be switched o n temporarily
because there is a malfunction (for example,
the battery charge leve l may be too low) .
Audi side assi st: S ystem fault!
The system cannot guarantee that it will de­
tect vehicles correctly and it is switched off.
The sensors have been displaced or are faulty.
H ave the system checked by an authorized
Aud i dealer or authorized Aud i Service Fac ility
soon.
Audi side assist: Unav ailab le when towing
Side assist sw itches off automatically when a
factory- installed trailer h itch is connected to
the electrical connector on the trailer. There is n o guarantee the system will switc h off when
using a retrofitted tra iler hitch. Do not use
side assis t when towing a t railer.
Audi side a ssis t 119

.. Let the belt wind up on the retractor as yo u
gu ide the belt tongue to its stowed position .
A WARNING
Never unfasten safety belt while the vehi­
cle is moving. Doing so will increase your
r isk of being injured or killed .
Adjusting safety belt height
-
With the aid of the safety belt height adjust ­
ment, the three point safety belt strap rout­
ing can be fitted to the shoulder area, accord­
ing to body size.
;g 0 0 C) .., m
Fig. 164 Safety be lt height adjustme nt fo r th e fro nt
seats - loop -a rou nd fitt ings
The shoulder belt should lie as close to the
center of the collar bone as possible and
should fit well on the body¢&.
in Safety belt
position on page 154 .
.. Push
the loop-around fittings up ¢ fig. 164
@, or
.. squeeze together the@button, and push
the loop-around fitt ings down @ .
.. Pull the belt to make sure that the upper at­
tachment is properly engaged.
A WARNING
Always read and heed all WARNINGS and
other impo rtant information ¢
page 152.
@ Tips
With the front seats, the height adjust­
ment of the seat can also be used to adjust
t he posit ion of the safety be lts.
Safety belts 155
Improperly worn safety belts
Incorrectly positioned safety belts can cause
severe injuries .
Wearing safety belts improperly can cause se­
rious injury or death. Safety belts can only
work when they are correctly positioned on
the body . Improper seat ing pos itions reduce
the effectiveness of safety be lts and will even
inc rease the risk of injury and death by mov­
ing the safety be lt to crit ical areas of the
body. Improper seating positions also in ­
crease the risk of serious injury and death
when an airbag dep loys and strikes an occu­
pant who is not in the correct seating posi­
tion. A driver is responsible for the safety of
all vehicle occupants and especially for ch il­
dren . Therefore:
.. Never permit anyone to assume an incorrect
sitt ing position in the vehicle while traveling
¢ &,. .
A WARNING
Improperly worn safety belts increase the
risk of serious persona l injury and death
whenever a ve hicle is being used.
- Always make s ure that all vehicle occu­
pants are co rrectly restrained and stay in
a correct seating position whenever the
veh icle is being used .
- Always read and heed all WARNINGS and
o ther important information
¢page 152.
Safety belt preten­
sioners
How safety belt pretensioners work
In front, side and rear -end collisions above a
particular severity and in a rollover, safety
belts are tensioned automatically .
The safety belts are equipped with safety belt
pretensioners . The system is activated by sen­
sors in front, side and rear-end co llisions of
great severity and in a rollover . This tightens
the belt and takes up belt slack¢.&.
in Service Iii>

156 Safety belts
and disposal of safety belt pretensioner on
page 156.
T aking up the s lack helps to reduce
forward occupant movement during a co lli­
sion.
Note
Never let the be lt remain over a rea r seat­
back that has been folded forward.
@ Tips
The safety be lt pretensioner can only be
activated once .
- In mino r frontal and side collisions, in
rear -end collisions and in accidents in­
vo lving very little impact force, the safe ­
ty belt pretensioner are not activated.
- When the safety be lt pretensioners are
activated, a fine dust is released . This is
norma l and is not caused by a f ire in the
vehicle.
- The relevant safety requirements must
be observed when the vehicle or compo­
nents of the system are scrapped. An au­
thorized Aud i dealer or qua lified work­
shop is fam il iar with these regulations
and will be p leased to pass on the infor­
mation to you.
- Be sure to observe a ll safety, environ­
mental and othe r regulations if the vehi­
cle or indiv id ual pa rts of the system, par­
ticularly the sa fe ty belt or airbag, a re to
be disposed. We recommend you have
your a uthorized Audi dea ler perform this
serv ice for you.
Service and disposal of safety belt
pretensioner
The safety belt pretensioners are parts of the
safety be lts on your Audi . Installing, r emov­
ing, servicing or repa iring of belt prete nsion­
e rs can damage the safety be lt system and
prevent it from working correct ly in a colli­
sion.
There are some important things you have to know to make sure that the effect iveness of
the system will not be impaired and that dis- ca
rded components do not cause inju ry or pol ­
l u te the environment.
A WARNING
-Improper care, serv ic ing and repair proce-
d ures can increase the risk of personal in­
jury and death by prevent ing a safety belt
p retensioner from activating when needed
or activating it unexpectedly:
- The belt pretensioner system can be act i­
vated only once. If belt pretensioners have been activated, the system must be
replaced.
- Never repair, adjust, or change any parts
of the safety be lt system.
- Safety belt systems including safety belt pretens ioners cannot be repaired. Spe­
cial procedures are required for removal,
installation and disposa l of th is system.
- For any wo rk on the safety belt system,
we strong ly recommend that you see
your author ized Audi dealer or qualified
technician who has an Audi approved re­
pair manua l, training and special equip ­
ment necessa ry .
~ For the sake of the env ironment
Undeployed a irbag modules and preten­
s ioners might be classif ied as Perchlorate
Materia l -special handling may app ly, see
www.dtsc.ca .gov/hazardouswaste/per­
ch lorate. When the vehicle or parts of the
restraint system including airbag modu les
safety be lts with pretensioners are scrap­
ped, all applicab le laws and regulations
must be observed. Your author ized Audi
dealer is familiar with these requirements
and we recommend t hat you have your
dealer perform th is servi ce fo r you.

There are some important things you have to know to make sure that the effectiveness of
the system will not be impaired and that dis­
carded components do not cause injury or pol­
lute the environment.
A WARNING
Improper care, servicing and repair proce­
dures can increase the risk of personal in­
jury and death by preventing an airbag from deploying when needed or deploying an airbag unexpectedly:
- Never cover, obstruct, or change the
steering wheel horn pad or airbag cover
or the instrument panel or modify them
in any way.
- Never attach any objects such as cu­
pholders or telephone mountings to the
surfaces covering the airbag units.
- For cleaning the horn pad or instrument
panel, use only a soft, dry cloth or one
moistened with plain water. Solvents or
cleaners could damage the airbag cover
or change the stiffness or strength of the
material so that the airbag cannot de­
ploy and protect properly.
- Never repair, adjust, or change any parts
of the airbag system.
- All work on the steering wheel, instru­
ment panel, front seats or electrical sys­
tem (including the installation of audio
equipment, cellular telephones and CB
radios, etc.) must be performed by a
qualified technician who has the training
and special equipment necessary.
- For any work on the airbag system, we
strongly recommend that you see your
authorized Audi dealer or qualified work­
shop.
- Never modify the front bumper or parts
of the vehicle body.
- Always make sure that the side airbag
can inflate without interference:
- Never install seat covers or replace­
ment upholstery over the front seat­
backs that have not been specifically
approved by Audi.
Airbag system 171
-Never use additional seat cushions that
cover the areas where the side airbags
inflate.
- Damage to the original seat covers or
to the seam in the area of the side air­
bag module must always be repaired
immediately by an authorized Audi
dealer.
- The airbag system can be activated only
once. After an airbag has inflated, it
must be replaced by an authorized Audi
dealer or qualified technician who has
the technical information, training and
special equipment necessary.
- The airbag system can be deployed only
once. After an airbag has been deployed, it must be replaced with new replace­
ment parts designed and approved espe­
cially for your Audi model version. Re­ placement of complete airbag systems
or airbag components must be per­
formed by qualified workshops only.
Make sure that any airbag service action
is entered in your Audi Warranty
& Main­
tenance booklet under
AIRBAG REPLACE­
MENT RECORD.
- In accidents when an airbag is deployed,
the vehicle battery separates the alterna­
tor and the starter from the vehicle elec­
trical system for safety reasons with a
pyrotechnic circuit interrupter.
- Work on the pyrotechnic circuit inter­
rupter must only be performed by a
qualified dealer - risk of an accident!
- If the vehicle or the circuit interrupter
is scrapped, all applicable safety pre­
cautions must be followed.
{® For the sake of the environment
Undeployed airbag modules and preten­
sioners might be classified as Perchlorate Material -special handling may apply, see
www.dtsc .ca.gov/hazardouswaste/per-
ch lorate. When the vehicle or parts of the
restraint system including airbag modules
safety belts with pretensioners are scrap­ ped, all applicable laws and regulations
must be observed. Your authorized Audi .,..
•
•