Page 169 of 189
Service and maintenance167
protection down to approx. -28 °C.
This concentration should be
maintained all year round. The use of additional coolant additives that
intend to give additional corrosion
protection or seal against minor leaks
can cause function problems. Liability
for consequences resulting from the
use of additional coolant additives will be rejected.
Brake fluid Only use high-performance brake
fluid approved for the vehicle. Consult
a workshop.
Over time, brake fluid absorbs
moisture which will reduce braking
effectiveness. The brake fluid should therefore be replaced at the specified interval.
Brake fluid should be stored in a
sealed container to avoid water
absorption.
Ensure brake fluid does not become
contaminated.
Page 170 of 189
168Technical dataTechnical dataVehicle identification..................168
Vehicle data ............................... 171Vehicle identification
Vehicle Identification
Number
The Vehicle Identification Number is
visible through the windscreen.
The VIN is also displayed behind a
removable plastic cover on the right-
hand side door step.
Page 171 of 189

Technical data169Identification plate
The identification plate is located on
the right-hand door pillar.
Information on identification plate 1)
:
1=Manufacturer, type approval
number2=Vehicle Identification Number3=Permissible gross vehicle
weight rating4=Permissible gross combination
weight5=Maximum permissible front axle
load6=Maximum permissible rear axle
load7=Vehicle-specific or country
specific dataThe combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight. For
example, if the front axle is bearing its
maximum permissible load, the rear
axle can only bear a load that is equal
to the gross vehicle weight minus the front axle load.
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.
Engine identification The technical data tables show the
engine identifier code. Engine data
3 172.
To identify the respective engine,
refer to the engine power in the EEC
Certificate of Conformity provided
with your vehicle or other national
registration documents.1) The VIN plate on your vehicle may differ from the illustration shown.
Page 172 of 189
170Technical data
It is possible, using the Vehicle
Identification Number (VIN), to
determine the engine type that is installed in your vehicle. For further
information consult a workshop.
Page 173 of 189
Technical data171Vehicle dataRecommended fluids and lubricantsRequired engine oil qualityEngine oil qualitydexos 2✔
In case dexos quality is unavailable in International countries, you may use the oil qualities listed below:
Engine oil qualityACEA A3/B4/C3✔
Engine oil viscosity grades
Oil viscositySAE 0W-30, SAE 0W-40, SAE 5W-30, SAE 5W-40
Page 174 of 189
172Technical dataEngine dataSales designation1.6 CDTi 901.6 CDTi 1151.6 CDTi BiTurbo 1201.6 CDTi BiTurbo 140Engine identifier codeR9M 408R9M 408R9M 450R9M 450Number of cylinders4444Piston displacement [cm3
]1598159815981598Engine power [kW]668588103at rpm3500350035003500Torque [Nm]260300320340at rpm1500175015001750Fuel typeDieselDieselDieselDiesel
Page 175 of 189
Technical data173Vehicle weight
Kerb weight, basic model
Optional equipment and accessories increase the kerb weight.
Loading information 3 69.ModelEngineWheelbaseRoofPayload ClassGross Vehicle Weight ratingKerb weight 1
,2VanR9MShortStandard100027001661120029001661High120029001771LongStandard120029001695High120029001775ModelEngineWheelbaseRoofPayload ClassGross Vehicle Weight ratingKerb weight 1
,2Combi, BusR9MShortStandard100027001900120029001900LongStandard120029001900ModelEngineWheelbaseRoofPayload ClassGross Vehicle Weight ratingKerb weight 1
,2Platform cabR9MLongStandard120029001520
Page 176 of 189
174Technical dataModelEngineWheelbaseTrim level
Additional weightsFront axleRear axleTotalCrew vanR9MShortBase246185Mid276996Upper3278110LongBase315485Mid356196Upper41691101=Kerb weight and gross vehicle weight increase on models fitted with bad road equipment package - refer to VIN plate.2=Minimum vehicle weight according to Type Approval, including all fluids, vehicle tools and a 90% fuel load. Excludesthe weight of the driver and deletable options, e.g. spare wheel, bulkhead and sliding side load door. Final weight may
vary according to the specification of the vehicle, e.g. options, deleted options and accessories.Vehicle dimensionsTypeVanCombiPlatform cabWheelbaseShortLongShortLongLongLength [mm]49985398499853985398Width without exterior mirrors [mm]19551955195519551955Width with two exterior mirrors [mm]23782378237823782378